How about the decoration design of the wall on the wooden board? What are the precautions during con

The color of the wood planks used on the wall is generally the same as the color of the floor furniture, and the whole space looks more uniform. When decorating a home, it is not only feasible to put wooden planks on the wall, but also very beautiful. Before designing a plank backdrop, you first need to plan the space size of the backdrop.

This is of course very good, it will be more suitable for the pastoral style. Be sure to do a good job of the base treatment, be sure to fix the planks well, avoid dampness on the wall, and pay attention to proper drying.

It is best to match the color of the wood board with the color of the floor. The owner should always supervise the construction crew; A hard hat must be worn when entering the site.

Precautions for wall panel installation

1. The construction of the wall panel should be made first with a large surface and then a hole, and the installation should be started from the joint of the wall column.

2. Clean up the dust on the construction surface, pop up the partition board position line on the wall and floor and ceiling according to the design requirements, mark the door and window openings and pipeline directions and reserved holes, pop up the assembly line, and check the flatness of the ground, and the depression is greater than 40mm and should be smoothed with fine stone concrete, and its strength reaches 25MPa to be constructed.

3. Coat the top and side edge of the wallboard with adhesive, the thickness of the adhesive is not less than 5mm, and the coating and scraping should be uniform.

4. When the board needs to be repaired, it should be cut according to the actual size of the row board, and the vertical incision should be closed and filled with cement mortar, and the micro-binder should still be coated during splicing.

Wall panels are classified using functions.

1. Interior wall panels.

There are three types: transverse wall panels, longitudinal wall panels and partition wall panels. The transverse wall panel and the longitudinal wall panel are load-bearing wall panels, and the partition wall panels are non-load-bearing wall panels. Interior wall panels should have the functions of sound insulation and fire prevention.

Interior wall panels are generally made of a single material (ordinary concrete, Portland concrete or light aggregate concrete), and there are two types: solid and hollow.

2. Exterior wall panels.

There are three types of façade panels: façade panels, gable panels and eaves panels. The front exterior wall panel is a self-supporting wall panel, and the gable panel and the eaves wall panel are load-bearing wall panels. In addition to the function of sound insulation and fire prevention, the exterior wall panel should also have low energy consumption, thermal insulation, impermeability, freeze-thaw resistance, anti-carbonization and other functions and meet the requirements of the aesthetics of architectural art decoration.

During the installation and construction of wall panels, the following matters should be noted:

The construction of the wall panel should be made first as a large surface and then as an opening, and the installation should be started from the joint of the wall column; Clean up the dust on the construction surface, pop up the partition board position line on the wall and floor and ceiling according to the design requirements, mark the door and window openings and pipeline direction and reserved holes, pop up the assembly line, and check the flatness of the ground, the depression is greater than 40mm and should be smoothed with fine stone concrete, and its strength reaches 25MPa to be constructed. The top and side edge of the wallboard are coated with adhesive, the thickness of the adhesive is not less than 5mm, and the coating should be uniform; When the board needs to be repaired, it is cut according to the actual size of the row board, the vertical incision is closed and filled with cement mortar, and the micro-binder still needs to be coated during splicing; The wall panel should be fixed first after the wall board and then the door and window moist board, and then the whole board and then the board. When the wall board is erected, the side can be squeezed tightly in place with a crowbar, and the verticality and the flatness of the adjacent board surface can be corrected in time, so that the joint is tight and straight, and the gap should not be greater than 5mm, and the extruded adhesive is scraped and filled in time, and then the bottom of the wall board is tightened with a wooden wedge; After the wall panel is fully positioned, the bottom of the wall panel must be 1:

3. The cement mortar plug joints should be filled, and each joint should be pasted with glass fiber mesh cloth; The curing time of the installed wall shall not be less than one week, and the strength of the caulking concrete shall be greater than 15MPa can remove the wooden wedge, and fill the hole with mortar to fill the level, and it is strictly forbidden to knock and chisel during the curing period to avoid vibration and cracking of the wall.

Beware of Trojans.

Adopt mine.

1. There are many types of wood wallboards, such as plastic wood wallboards, solid wood wallboards, wood veneer wallboards, ecological wood wallboards and so on. Among them, WPC wallboard is a more commonly used wood wallboard, and the specifications of this wallboard can be selected at will, and too much material will not be wasted.

2. Plastic wood wallboard is made of wood as the base material, and then a certain amount of plastic and processing aids are added, and then heated and formed with a mold nose after mixing. This kind of wall panel has the dual characteristics of wood and plastic, and is a new type of composite decorative material.

3. The surface of the plastic wood wallboard is not painted, and it is also pressed in the production process, and no chemical components containing harmful substances such as formaldehyde are added, so its environmental protection is relatively high and will not cause harm to the health of the owner.

4. Because of its own characteristics, the ability to resist impact is relatively weak, if you hit the plastic wood wallboard with sharp objects or heavy objects, it will crack and damage, so you should pay attention to protect the plastic wood wallboard.

Generally, places such as entrances, TV background walls, restaurant background walls, bedroom background walls, balconies and other places are more suitable and will also appear more designed.

The advantage of the wall on the wooden board is that it can form an echo with the ground, and the overall sense is stronger. The disadvantage is that it is relatively difficult to take care of, especially in the south, the weather is more humid, and it is easy to get moldy when encountering a southerly wind. The north will be more suitable for such a decoration method.

The advantage of the formwork wall is that it can insulate and reduce formaldehyde, and the disadvantage is that when the fire occurs, it will cause a large area of loss, and the wood board decoration is more suitable for steel structure houses, because this kind of house is fire-resistant and high-temperature resistant.

One of the great advantages of wood flooring is the protection against noise, and the disadvantage of flooring walls is that the floor is warped due to moisture. The entrance, TV background wall, bedroom version background wall, and hall background wall are suitable for such decoration methods.

Relatively speaking, the decoration materials such as wooden boards are not low, but for large-scale decoration, you still need to know that the decoration wall is decorated with wooden boards?

Decoration, veneer wall decoration is OK, according to the size of the room, a small area of space can be designed in the form of dots or decorative panel lines, according to local conditions for decoration, large areas of the room should consider the local decoration of the packaging of this panel is best determined by the overall effect of the decoration.

Aligning walls horizontally, like paving, must be flattened before boxing. It is best to use infrared to adjust the plane height horizontally to avoid uneven or undulating floors due to irregularities in the packaging itself, which can affect the appearance of disturbance.

Keep the walls dry. If the front is wallpaper wood, the rest of the waterproof coating, the method of wiping the waterproof coating can also be used in water, wrapping blocks to prevent the wood from getting wet, there are more than the budget, however, in the dry area of the bathroom and in the wet place of the kitchen, it is better to make the floor waterproof.

Before installing the board, keep the wall dry to prevent moisture from entering the board and making the board arc.

The repair board uses the core board and other boards as the base layer, uses the large core board or similar as the base plate for the wall, and secures the board to the large core board.

Playing with Closed Plum Socks on the Base Lawn According to quality control sayings, when you pack your walls, you have to use solid wood or composite panels for keeling. The keel can be moved horizontally. We recommend that you determine the spacing according to the width of the board and then secure it with your fingernails.

Large core board: two plywoods are made in the middle of the adhesive, with a total thickness of more than 3mm. )

When the planks cover a large area of wood, the edges are very important. I currently use a picture frame to close the rim of the car. The length of the photo frame on the market is only 3 meters, so if the wall is long, it will include the interface, and the interface processing needs higher requirements.

It is better to choose a plank because it becomes better and more beautiful.

The decoration of the wall with wooden planks is the above content, so that the decoration can be understood comprehensively.

The decoration of the wall with wooden planks is the above content, so that the decoration can be understood comprehensively.

You can get it for free

Make a TV background wall out of wooden boards. When decorating a wall with wooden boards, you can use wooden boards to make a TV background wall. Of course, if you choose wood as a TV backdrop, it must be consistent with the overall décor style of the home.

Only then will you be able to blend in with the crowd and it won't look any different. Decorate the walls with woodcuts. You can make new and unique woodcuts out of wood, and you can also paint or carve on wood.

Make a lattice shelf out of wood. It not only uses the board to make grid shopping decoration solves the problem of placing small objects, but also plays a role in decorating the wall. The lattice decoration made of board makes the wall more beautiful and functional.

You can put the ordinary beloved little place in the interior to wear inside, and add more color to the wall. Decorate the walls with parallel planks. Decorate the walls with parallel planks.

At the same time, it simply has the function of decorating the wall, that is, this simple style is more suitable for fashionable young people, simple and modern. Use wood as a backdrop for **. Decorate the wall with wooden planks, which can be used as a background wall.

For all the retro ways of displaying the style, the overall style of the home installation should be harmonious and unified. The corridor can choose a light background wall, and the slender corridor can provide favorable conditions for displaying more**. Make a fireplace wall out of wood.

You can decorate the walls with a wooden fireplace. The fireplace is a representative of the European style decoration.

The appearance of the fireplace made of wooden planks makes the overall home decoration style appear high-end and atmospheric. It's like being in a fairytale kingdom. I'm like a hero from a fairy tale.

Go live out your childhood fairy tale dreams. This method is relatively simple and can be done directly with wood coreboard. First of all, the wall is opened with a cutting machine, the depth is about 5 cm, the cutting board is directly embedded in the groove, filled with white latex and plaster, and fixed to go, but it should be noted that this method can only be used as decoration and cannot be withstanding.

It can protect the wall well, and can also be moisture-proof and waterproof, making the interior look more beautiful and transparent; To choose the right plank, check the flatness of the wall in advance, ask a special installer to install it, and do a good job of design.

Beautiful and generous, improve the use value, improve the service life, make the house look more beautiful, make the house look brighter; You need to choose the right worker, choose the right team, choose the right material, choose the right place, and you also need to observe your entire decoration style.

More beautiful and generous, more beautiful, in order to better protect the wall, you can choose the right wood to wrap the wall, more beautiful.

What are the benefits of a wooden plank on the wall?

1. The irregular texture of the wooden board has an original ecological feeling, and the laying of the wooden floor can make the space more integral and have a good visual effect.

2. The colors and types of wood boards are very rich, which makes the choice of styles more diversified and creates a sense of fashion.

3. The plasticity of wood is stronger than that of ceramic tiles, which is environmentally friendly, beautiful and natural.

How to do a wood panel wall decoration?

1. Leveling before laying, before laying, the wall should be leveled first, so as to avoid unevenness after the pavement is complete, which will affect the appearance.

2. Fix the wall panel, wood floor to decorate the background wall, be sure to fix. According to the requirements of the design, the center line and width line of the partition wall should be consistent with the thickness of the partition wall, the elastic line should be clear, and the position should be accurate.

3. Edge banding: After the laying is completed, the edge must be closed, which is a very important step. If the edge is not good, the effect will be very unsightly.

The damage to the wall on the wooden board is not great, and the details to be paid attention to during construction: the wet weather has a greater impact on the painter. Painters batch putty and brush latex paint.

and the painting of wood-made goods can also be affected by wet and cold weather. In the office renovation project, the wall scrapes putty.

Need to wait for the putty powder.

If the putty powder can't dry, start to brush the architectural coating, which may cause the moisture to return outward, resulting in bulging. When rolling paint, it is usually a second brush of topcoat and 2 coats of paint, and the second brush can be started in 4 hours, but if it is rainy, it must be done a second time after a day.

Wet weather on wallpaper.

The pavement is very affluent, similar to the work of painters such as putty, should wait for the wall decoration to dry thoroughly before pasting the wallpaper, otherwise the wallpaper glue brush up, the water vapor in the wall.

It can also lead to bulging. In addition, in hot weather, the strong alkalinity of the wall is not easy to release, which can easily cause the wallpaper to turn yellow after paving, and it will be unsightly. Whether it is a parquet floor or a parquet floor, it is best not to start it on a rainy day.

Due to rain, the road surface will return to moisture, especially on the first floor, and it will also be wet.

At this time, the water loss is slow, and the glue dries slowly, if in this case, it is very easy to deform or hollow the wall in the future. In rainy days when the relative humidity of the air is not too large, it is still necessary to lay the floor, but it is necessary to pay attention to laying it tightly, otherwise the weather will be sunny and the water will be volatilized and tidy, which will also lead to the retraction of the wooden floor, resulting in too large a gap between the wooden floors. with ground control panel.

As with paving, the wall must be leveled before the plank wall can be paved.

It should be infrared.

spirit level to prevent unevenness or fluctuation of the surface layer of the woodworking board wall due to the unevenness of the ground itself, which will affect the appearance. Before the wall is paved with wood, if the cost budget is relatively large or there is only a waterproof coating left, you can apply the method of applying a waterproof coating to the cement tiles to avoid the board being wet.