What is the difference between an ultrasonic humidifier and a steam humidifier? Which humidifier do

Updated on home 2024-07-15
11 answers
  1. Anonymous users2024-02-12

    UltrasoundHumidifiersIt is different from the principle of steam humidifiers, the amount of noise generated, the service life, the water quality required, etc., and I prefer ultrasonic humidification.

    Ultrasonic humidifiers and steam humidifiers can increase the humidity in the room, but the performance of ultrasonic humidifiers is more advanced, their working principles are different, steam humidifiers work with the help of a filter to suck water into the fan, and then convert the water into water mist or spray from the humidifier The efficiency is relatively high, while the principle of ultrasonic humidifiers is to use high-frequency sound vibrations to produce ultra-fine water mist, and then add the discharged water to the room.

    First, the noise generated is different

    Ultrasonic humidifier and steam humidifier produce different noise levels, although the noise of these two humidifiers is not too big, but the noise of the two is lower than that of ultrasonic humidifiers, and there is basically no sound It is not an exaggeration to say that he is silent, but there will be some sounds in the humidification process of steam humidifiers.

    Second, the height is different

    The ** of ultrasonic humidifier and steam humidifier are different, and the ** of ultrasonic humidifier is relatively high, but it does not use a filter during use, and there is no problem of replacing the filter membrane, so its maintenance cost is relatively low, but the evaporator.

    The humidifier is relatively cheap, but it needs to use a filter when working, and it will also use a filter membrane, and it must be cleaned and replaced regularly, and its later maintenance cost is relatively high.

    Third, the service life is different

    The service life of ultrasonic humidifier and steam humidifier is different, the service life of ultrasonic humidifier is longer, in addition, the humidification intensity of this humidifier is large, the humidity is uniform, and the humidification efficiency is high, energy saving and power saving, these are the differences between it and the steam humidifier, but this humidifier is limited by water quality when humidifying, if the water quality is relatively hard, it is easy to produce white impurities, but the steam humidifier has no requirements for water quality, and it is not limited by water quality when used.

  2. Anonymous users2024-02-11

    The way of water vapor fogging, the degree of refinement of water vapor, the ease of use, and the effect of air humidification are very different from each other. I prefer ultrasonic humidifiers because they humidify better and improve the well-being of family life.

  3. Anonymous users2024-02-10

    There are many differences, first of all, the quality is different, the working principle is different, the function is different, the humidification effect is also different, and the ** sold on the market is also different. I prefer ultrasonic humidifiers.

  4. Anonymous users2024-02-09

    The difference is that the humidification method is different, the humidification frequency is different, the humidification temperature is different, and the degree of air purification is different. I prefer a steam humidifier because it allows the air to be kept at a constant temperature.

  5. Anonymous users2024-02-08

    **Different, different methods of use, different humidification functions, different price comparisons, different working principles; I prefer ultrasonic humidifiers because they bring less noise to daily life, are more cost-effective, and are very convenient to use and have a long service life.

  6. Anonymous users2024-02-07

    Ultrasonic type: **low, many choices, silent, high appearance; It is easy to wet the area near the humidifier, the humidification of the finch rock is uneven, easy to scale, breed bacteria, there is no water filtration system, and the water quality requirements are high. Thermal evaporation:

    Boil water to humidify . Cold evaporation: no fog, humidification is even, it will not wet the area near the humidifier, it is convenient to add tap water directly, and there is UV sterilization; The noise is slightly louder, the first is high, the cost of replacing consumables in the later stage, and the volume is larger.

  7. Anonymous users2024-02-06

    In my personal opinion, pure humidifiers and cold evaporative humidifiers are the same type of humidifiers, but they are called differently, and they are both humidifiers without fog. At present, the humidifiers on the market mainly include fog-free cold evaporative humidifiers and fog ultrasonic humidifiers, and these two humidification methods do have an advantage and disadvantage comparison.

    Ultrasonic humidifier through the atomizer sheet, the water vibration into tiny water droplets, the form of water mist to humidify, if the added water contains impurities such as calcium and magnesium ions, it is very easy to spray out "white powder", that is, scale, not only to the humidifier has damage, but also has a great impact on the health of the respiratory tract, if you want to use health, you need to spend on water quality, such as adding pure water and other soft water.

    If you want to save this part of the money, you can choose a fog-free humidifier that can directly add tap water, although it is a little more expensive than an ultrasonic humidifier, but it has a relative advantage in humidification effect and water purification. If it is an industrial humidifier, the Yadu humidifier does a better job in this regard, and if it is used for household humidification, Schulox's humidifier.

    Buying a fog-free humidifier is cost-effective, and it is relatively safe and secure to use.

  8. Anonymous users2024-02-05

    To be honest, a pure evaporative humidifier will be a little better than ultrasonic, but you can still choose according to your own requirements.

    Ordinary ultrasonic humidifiers can not directly add tap water, mainly because the calcium and magnesium ions in tap water are easy to form scale in atomizers, water tanks, fog outlets and other places, and may spray white mist, which is very bad for the human body, and even affects the humidification efficiency.

    Cold evaporative humidifier can directly tap water, this humidification method is to simulate natural evaporation, compared with ultrasonic humidification is more pure, ultrasonic is water mist directly sprayed, and cold evaporation fog-free humidification is humidified with very small water molecules, and water molecule humidification can spread to a larger range, and the humidification effect will be better.

    No matter who the humidifier is for, we must pay attention to whether the humidifier is good enough in terms of water purification, such as whether it has a sterilization function or whether the water tank has antibacterial materials, etc., here is a recommendation of a relatively high-end cold evaporative humidifier - Bamuda's kimchi jar, in addition to being expensive, there is no problem, if you are in the case of a limited budget, you can also consider the Shule's fog-free humidifier that has done a good job in water purification and air purification.

  9. Anonymous users2024-02-04

    Introduction: With the arrival of the hot summer, many users will feel that the air is dry and uncomfortable, and there is a type of machine that can improve the air humidity, that is, the wet film humidifier. When it comes to the name of the wet film humidifier, is there a question mark on the heads of many users?

    Many users have only heard of ultrasonic humidifiers, but have not heard of wet film humidifiers, what is the difference between the two? Today's article is going to introduce to you, what is the difference between a wet film humidifier and an ultrasonic humidifier? How to use a wet film humidifier.

    Hopefully users.

    The principle of use of wet film humidifier

    When the water in the water tank is transported to the water sprinkler at the top of the humidifier, the water is evenly sprayed on the top of the wet film, and the water sprayer ensures that the water is evenly distributed to the wet film material, and the water penetrates down along the wet film material, wetting all layers inside the wet film, and the wet film is absorbed by the wet film material at the same time to form a uniform water film; When the dry air passes through the wet film material, the dry air and the moist wet film surface have a large area of contact, so as to achieve a large amount of water evaporation. A large number of water molecules are sent into the space to be humidified with the wind, so that the humidity of the air increases, so as to achieve the purpose of humidification.

    In the wet film humidifier, the wet film material is the component that people pay the most attention to, as far as the wet film material is concerned, there are composite wet film materials, white composite fireproof wet film materials, glass fiber wet film materials, metal piercing wet films, and Japanese wet films. Each has different characteristics. The composite wet film material has a long service life, the white composite fireproof wet film material has good fire resistance, the glass fiber wet film material has a high saturation efficiency value, and the humidification and water absorption performance are better.

    What is the difference between a wet film humidifier and an ultrasonic humidifier? Which is better?

    The wet film humidifier is a water sprinkler that is sent to the top of the wet film humidifier through the pipeline after filtered water, and the water penetrates downward along the surface of the wet film under the action of gravity, and is fully absorbed by the polymer wet film material, which forms a uniform water film due to the excellent water absorption of the wet film material; When the hot air passes through the wet film, the water fully absorbs the heat of the air and vaporizes and evaporates, so that the air can achieve the purpose of humidification.

    The ultrasonic humidifier uses the atomizer module at the bottom of the sink to convert electrical energy into mechanical energy, adopts electronic overclocking**, emits ultrasonic waves into the water, and throws the water away from the water surface through the high-frequency resonance of the atomizer sheet to produce a natural floating water mist and blow it out of the machine, without heating or chemical agents to produce 1-5 micron water particles floating in the air, so as to achieve the purpose of isoenthalpy humidifying the air.

    Wet film humidifiers and ultrasonic humidifiers have their own uniqueness, as for which one is good, it depends on where it is used, and it should be chosen according to the needs!

    The above is the working principle of the wet film humidifier and the difference between it and the ultrasonic humidifier. After the introduction of the article, have users found that the wet film humidifier is actually very easy to use? The design of different types of humidifiers is different, and the above also explains how the working principle of wet film humidification is, and the process is still very simple.

    You can get it for free

  10. Anonymous users2024-02-03

    Classification of sharp liquid: 1. Pure humidifier: Direct evaporation humidifier is also commonly known as pure humidifier.

    The pure humidification technology is a new technology just adopted in the field of humidification, through molecular sieve evaporation technology, to remove calcium and magnesium ions in the water, and completely solve the problem of "white powder".

    2. Electric heating humidifier: Thermal evaporative humidifier, also known as electric heating humidifier, its working principle is to heat water to 100 in the heating body, generate steam, and send the steam out with a motor. Electrically heated humidifiers are the simplest form of humidification.

    3. Cold mist humidifier: This humidifier uses the fan to increase the relative humidity of the air by forcing air to contact and exchange with water when passing through the water-absorbing medium.

    The difference between a negative ion humidifier and an ultrasonic humidifier:

    1. Definitions. Negative ion humidifier is a negative ion humidification device with humidification device, which can quickly atomize water and make the water mist suspended in the air for a long time.

    The ultrasonic humidifier mainly uses high-frequency **, and then through the high-frequency vibration of the atomizer sheet, the water in the humidifier is sold off the water surface to produce a floating water mist to achieve the purpose of air humidification.

    2. Features. Negative ion humidifier: The humidification host adopts stainless steel box, and the surface is sprayed with plastic, which is not only beautiful and practical in appearance, but also easy to install. The control mode is diversified, including manual control, timing control, humidity control, etc., without the need for personnel.

    Ultrasonic humidifier: small size, high humidification intensity, low power consumption, good control performance, small and uniform fog particles.

  11. Anonymous users2024-02-02

    There are two types of humidifiers, which are? Negative ion humidifier and ultrasonic humidifier, the difference between the two is as follows:

    First, the characteristics are different.

    1. Negative ion humidifier: It is a negative ion humidification device with humidification device, which can quickly atomize water and make the water mist suspended in the air for a long time.

    2. Ultrasonic humidifier: high humidification efficiency (close to 100%), high humidification intensity, small and uniform fog particles generated, can quickly reach the required relative humidity per unit time, and save water.

    Second, the principle is different.

    1. Negative ion humidifier: using an internally integrated atomizer and equipped with a waterless protection device, the fog particles produced by the friend shirt are only 1-10 m in diameter, which can quickly atomize the water and make the water mist suspended in the air for a long time.

    2. Ultrasonic humidifier: using high-frequency (**frequency, exceeding the range of human hearing), through the high-frequency resonance of the atomizer, the water is thrown away from the water surface and the natural and elegant water mist is generated.

    Third, the advantages are different.

    1. Zenbu negative ion humidifier: Considering that the humidifier may be used in the bedroom, if the noise is too loud, it will have a certain impact on consumers, so the standard has strict restrictions on the noise index.

    2. Ultrasonic humidifier: The integrated atomization movement comes with a water protection device, which can effectively ensure that the atomization movement will automatically stop working when the water level is too low, without the need for additional equipment, saving costs.

Related questions
8 answers2024-07-15

Ultrasonic flaw detector is a portable industrial non-destructive testing instrument, which can quickly, conveniently, non-destructively and accurately detect, locate, evaluate and diagnose a variety of defects inside the workpiece. >>>More

11 answers2024-07-15

To put it simply, high-frequency machines are weldingPlastic welding machine for soft materialsThe welding materials are PVC, PET, TPU, PU, etc. >>>More

5 answers2024-07-15

The vibration frequency is different, the characteristics are different, the hazards are different, etc. >>>More

8 answers2024-07-15

Ultrasound: 1Ultrasonic welding.

2.Ultrasonic nebulization. >>>More

9 answers2024-07-15

The working principle of ultrasonic plastic welding is: the machine converts electrical energy into ultrasonic energy through the ultrasonic transducer into ultrasonic energy (that is, high-frequency mechanical vibration energy with a frequency beyond the hearing threshold of the human ear), and the energy is conducted to the plastic workpiece through the sonotrod, and the joint surface of the plastic workpiece is melted after severe friction with an ultrasonic frequency of tens of thousands of times per second and a certain amplitude. The brief pressure maintained on the workpiece after the vibration stops causes the two weldments to solidify as one in a molecularly linked manner. >>>More