Furniture painting process, furniture painting process

1. Remove the decorations.

Before painting the furniture, first remove the decorations on the award-winning furniture, so as not to stain the paint on the decorations, affect the overall aesthetics, and also fear that the paint will be uneven.

2. Grinding. Use putty to level up, after grinding, see if the furniture has uneven places, use putty to level, polish again to a flat state, and dip a cloth with water to make it semi-wet. Wipe the powder on the furniture just after sanding, take a fine sandpaper and re-polish it, pay attention to the corners, and then clean up the powder with a water-soaked cloth.

3. Brush the paint.

Take the paint, brush, and open the paint cover. Dip the brush in a paint bucket, don't dip too much paint at a time, just a moderate amount. The rules for painting are from top to bottom, from left to right. Pay attention to the corners and hidden areas should also be painted so that they can be evenly maintained.

4. Drying and grinding.

1) After the furniture has been painted, let it sit in the room for three to five hours and wait for the paint to dry. Once the paint is dry, sandpaper the furniture from start to finish. The purpose of this polishing is to smooth out areas of uneven paint so that the paint can continue to be painted later.

2) Follow the first coat of paint for the second coat of paint, if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint, and then paint again. After that, it continues to dry and sand. A third pass of paint is applied.

5. Install decorations.

After the third coat of paint is completed and dry, you can install the handles and other decorations, so that the painting of the whole home is completed.

When painting, the environment and painting tools must be clean, and the operator should wear clean work clothes and clean work hats. Furniture painting is best carried out in a space with good ventilation, and it is also necessary to choose the best paint.

Avoid construction in low and high temperature environments, when the temperature is lower than 5 degrees, the paint drying time will be poor, and there may be white fog or matting. When the temperature is too high, especially in direct sunlight, the paint dries too fast, and bubbles and other phenomena are easy to occur.

It is not advisable to carry out paint construction in rainy days or weather with ambient humidity greater than 85%, otherwise it is easy to produce problems such as whitening of paint film.

There are three different painting methods: closed, semi-closed and open, and the final effect of different painting methods is different. Specifically, the fine grain of the wood is almost invisible after the closed painting, while the open effect is more natural and shows the texture of the wood.

There is not much difference between the various construction methods, and the basic construction sequence is: white blank plate grinding substrate closure (scraping putty) grinding brushing primer (first pass) sanding brushing primer (second and third pass) full sanding brushing topcoat (first pass) sanding brushing topcoat (second pass).

Paint order for wood furniture.

1. Plate treatment.

Before painting, the wood should be cleaned and any dust on the surface of the wood should be wiped clean. A special dust cloth can be used for cleaning, and large areas such as floors can be vacuumed repeatedly. At the same time, use sandpaper to polish the surface of the board or wood lines, pay attention to protect the veneer, and do not sand through.

2. The plate is closed.

The prepared special plate sealant is evenly applied to the plate, which can effectively seal the plate and prevent the plate from being polluted.

The sealing of the plate can prevent excessive moisture absorption, moisture dispersion and deformation of the plate, enhance the adhesion between the paint film and the plate, save the amount of paint, and enhance the hardness of the paint film.

3. Scrape putty.

Select the matching wood putty, and after the mixing, scrape and apply the putty to the wooden eye. After the putty is dry, sandpaper is used to polish and thoroughly clean the putty on the wooden utensils.

Filling the wood holes with putty can reduce the amount of wood paint and improve the flatness of the paint film. Different painting effects have different requirements for the scraping of putty. For example, for an open effect, the putty color should be modulated and the color of the plate should be consistent before scraping.

4. Primer construction.

Adjust the wood primer according to the required proportion, which can be brushed or sprayed. The function of primer construction is to fill the wooden holes and increase the thickness of the paint film.

During construction, pay attention to the primer after drying, it must be thoroughly sanded with sandpaper, and then apply the primer again. It is required to be evenly brushed, no sagging, and the wooden eye is filled flat.

5. Sanding treatment.

Sanding the board with sandpaper is actually a step throughout the wood paint construction process. The plate should be sanded during treatment, the scraping putty should be sanded, the primer construction should be sanded, and the topcoat should be sanded before and after construction. The sanding step is very crucial.

The sanding treatment makes the plate smoother, smoother, and easier to paint. After painting, sanding makes the surface of the paint film smooth and smooth. However, pay attention to avoid horizontal sand when sanding, and do not use too coarse sandpaper.

6. Topcoat construction.

Before the topcoat is applied, the surface of the wood must be cleaned again to remove dust particles, so that the surface of the paint film can have a better coating effect. Every time the topcoat is painted, it is not advisable to brush too thick at one time, and it is best to take the method of painting multiple times, and then do the construction of the next layer after the paint film is dry.

The topcoat construction directly affects the final effect of the paint film, and the topcoat construction requires that it must be evenly painted, no sagging, good gloss, no obvious brush marks, and a smooth and delicate feel.

Tools required: grinding wheel, wood texture paint, mothproof, non-woven fabric.

1. First of all, use the grinding wheel to polish the surface of the old furniture.

2. Then take a jar of wood texture paint, which is the effect of the texture of the wood.

3. Then find a piece of non-woven fabric, dip it in wood texture paint, and evenly coat it on the old furniture.

4. After the surface is dry, wipe it again with a dry non-woven fabric.

5. In this way, the furniture painting process is completed, and the effect is shown in the following figure

In home decoration, paint engineering occupies a very important part, the appearance of paint construction engineering has basically indicated that the decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what is the specific paint construction process.

Introduction: In home decoration, paint engineering occupies a very important part, the appearance of paint construction engineering has basically been said to be decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what are the specific steps of the paint construction process.

In home decoration, paint engineering occupies a very important part, the emergence of paint construction engineering has basically indicated that the decoration and more than half, the general paint construction process is for the interior surface to be more interesting, so what are the specific steps of the paint construction process.

When decorating a house, most of the owners are handed over to the decoration company to decorate, which not only saves their own time, but also reduces some of the decoration troubles. Generally speaking, in home decoration, the paint project is generally the face of home decoration, if it is not done well, it will not only affect the quality of home decoration, but also leave many troubles to the owner, such as the appearance of paint loss, so in home decoration, what are the steps of the paint project?

1. Steps of painting project: preparation.

Before decoration, the construction personnel should prepare for painting in advance, generally including the cleaning of the paint environment, the protection measures of furniture, etc., such as the door and window frame is best pasted with a layer of color separation paper, and the furniture of wooden cabinets and partitions is best wrapped with a layer of newspaper, so as to avoid the situation that the paint drips on the surface of the furniture and is stained.

2. The steps of the paint project: color mixing.

In the home space area of the finish, first of all, calculate how much paint is needed to avoid the occurrence of insufficient paint or waste in the later stage, and then evenly allocate the required paint to prevent the surface of the furniture from being affected when painting, resulting in uniform color, and finally the primer is applied to avoid the texture of the furniture surface.

3. The steps of the painting project: construction.

If the owner has done the first two steps of the work, now officially entered the construction stage of painting, which is in the order of first hanging ceiling, lines, and then the wall. Generally speaking, it is necessary to repeat at least two times when painting the wall, but it is best to have a certain time interval between the two coats.

4. The steps of painting engineering: grinding.

After the paint is finished, in order to keep the wall smooth, we need to polish the wall, when the wall is sanded, we can touch the wall with our hands to see if the wall is smooth, and then use the softer putty to process it again, and then sweep the wall again.

5. Steps of painting project: cleaning.

After the construction personnel have completed the above steps, the owner can accept it, and during the acceptance, it is necessary to carefully check whether the wall and the surrounding area are clean and clean, and whether there are traces of paint in other places.

If you like primary colors, use varnish. Generally, log furniture is brushed with a primer and then patched with eyes and gaps - the first time to polish - the second time to apply the primer - the eyes and gaps are smeared with "fill in the blanks" - after drying, polishing - after drying, repairing - lacquer.

After the furniture at home has been used for a long time, it is inevitable that the paint will fall off and become old, so many people will choose to repaint the furniture to make the furniture the same as new, so what is the method of furniture painting? Let's take a closer look.

1. If you want to spray paint furniture, then you should choose the appropriate spray paint according to the spraying object. If you want to paint outdoor furniture, you can choose a special outdoor paint and choose the color and texture of the paint according to your preference.

2. If the furniture is used for a long time, it is inevitable that a lot of dust, dirt and so on will accumulate on the surface of the furniture, so it is recommended that you use soapy water to clean the furniture thoroughly before painting. Then use sandpaper or a wire brush to wipe off the old paint or rust on the surface of the furniture.

3. If the furniture has not been polished, then it is necessary to find a way to remove the burrs on the surface of the furniture. When the furniture is cleaned, or after polishing and wiping, it is also necessary to let the furniture dry, otherwise the spray paint may not adhere to the surface of the furniture.

4. Before painting the furniture, you also need to use screwdrivers and other tools to disassemble the hardware on the furniture, such as: hinges, handles, etc. If there is an area of furniture that you do not want to paint, you can cover it with tape and newspaper, such as a mirror.

5. If you want to spray paint the furniture, it is best to do it in a well-ventilated place, or move the furniture outside for painting. In order to better protect the ground and avoid the ground being sprayed with paint, you can generally put some newspapers or plastic film under the furniture.

6. Before spraying furniture with spray painting, the sprinkler with spray paint should be shaken vigorously a few times to ensure that the sprinkler irrigation can spray a thin paint film. When painting the furniture, it should also be moved to avoid over-spraying the local parts of the furniture, which can lead to dripping.

7. After the furniture is sprayed once, it should be left to air for about an hour, and when the first paint is dry, the second paint should be sprayed on the surface of the furniture. The specific amount of time it takes to dry the furniture can generally be found from the lacquer.

8. When spraying furniture with painting, the nozzle of sprinkler irrigation should be about 30 cm away from the furniture, if the distance is too close, it will cause the paint on the surface of the furniture to flow. When the furniture is thoroughly painted, it can be moved indoors for about a few hours.

The above is a detailed introduction to the method of furniture painting, I hope it can help friends in need. When painting furniture, it is important to master the correct painting skills, preferably outdoors and not too close to the furniture.

When spraying paint on the wall, a paint gun is generally used, so that the construction is more simple and convenient.

1. Dismantle the decorations: Before painting the furniture, you first need to disassemble the decorations on the furniture to avoid the paint getting on the decorations and affecting the overall aesthetics.

2. Polishing the surface: polish the surface of the furniture, see if the furniture has uneven places, level with putty, polish it again to a flat state, and finally wipe it clean with a wet rag.

3. Brush paint: dip the brush in the paint bucket, don't dip too much paint at a time, paint from top to bottom, from left to right.

4. Drying and grinding: After the furniture is painted, let it stand for three to five hours and wait for the paint to dry. Once the paint is dry, sandpaper the furniture from start to finish to smooth out uneven paint. After that, it continues to dry and sand, and then applies a second coat of paint.

5. Install the decorations: After the third paint painting is completed and dry, install the decorations that were dismantled at the beginning.