How to verify the authenticity of Dongpeng tiles, how to identify the authenticity of Dongpeng tiles

Answer: To distinguish the authenticity of Dongpeng tiles, the method is as follows:

1) Carry out product appearance quality identification Place the ceramic tile in a well-lit place for appearance quality identification: the size of the size deviation. Take a brick to measure whether its side length meets the requirements, and then take several bricks stacked together, compare whether its size is consistent, the size error will not only increase the difficulty of construction, but also affect the effect after decoration.

The deviation is allowed in 1 mm for small bricks and 2 mm for large bricks. The size of the deformation. Take two bricks side by side, depending on whether the side seam is small and straight, the edge straightness is good; Then the two bricks are buckled together to see if the gap is small and straight, and the flatness is good.

**Whether there is concave or convex on the side of the tile, the front side is flat and slightly convex as well, if the warping situation is serious, it will affect the firmness of the tile in the future. The size of the dimensional deviation and the size of the deformation determine the size of the mortar joint, the straightness and the flatness of the decorative surface of the tile paving. Note:

The size between different varieties of mixed paving, accessory bricks, waist line bricks and main bricks should be matched. The size of the color difference. Due to the large number of wall tiles purchased at one time, if there is an obvious color difference between multiple packages, the decoration effect will be very affected, and all packaged products should be sampled and compared, and the changes in color difference should be observed.

Surface. Observe whether the brick surface is delicate and uniform, and observe whether the product has obvious quality defects such as missing glaze, spots, cracks, glaze bubbles, ripples, etc., and the above defects can never be selected. Then you can use a few drops of colored liquid drops on the local surface to coat evenly, wipe dry with a damp cloth after a few seconds, and observe whether there are residual color spots on the surface. If it can't be scrubbed, it means that the brick has a large water absorption rate and poor anti-fouling ability.

2) Judgment of intrinsic quality knock. Gently knock (or flick with your fingers) the suspended tile with a thin stick, and the sound is crisp, indicating that the tile has no cracks, a good degree of sintering, and high strength; If the sound is muffled, it means that there may be heavy skin or cracks in the tile: heavy skin is that when the brick is formed, the air in the material is not discharged, resulting in a bad combination between the material and the material, internal cracks, which can not be seen from the surface, and can only be identified by listening to the sound.

Hand plucked. The tile components are heavier and more solid. This is mainly due to the selection and ratio of raw materials, the better the ceramic tile in the processing of the greater the mechanical pressure, so the weight is also heavier.

Drip. Drop a few drops of water on the back of the tile and observe the absorption speed, the faster the absorption, the greater the water absorption. Generally speaking, products with low water absorption, good sintering degree, high strength, good frost resistance, and excellent product quality.

Scrape. Scratch the glaze of the tile with a sharp object to see if there are scratches, if there are scratches, it means that the glaze is poor and easy to make people slip, and the surface of the glaze is polished, and the brick surface will not be able to be cleaned.

Dongpeng is basically true, but the factory address is different, you look at the ** of the packaging box, it is written.

Summary. Dongpeng tile is a first-line brand, therefore, there will be some fake Dongpeng tile on the market, Dongpeng tile authenticity identification method is as follows: 1, look at the quality, in general, the quality of the brand tile is very good, knocking on the tile will make a crisp sound, the more brittle the sound, the better the hardness quality; 2. Look at the anti-counterfeiting logo, the general brand tiles will do the anti-counterfeiting logo on their own tiles, Dongpeng tiles 30 * 30 have marks in the middle, and 80 * 80 Dongpeng tiles generally have marks on the four corners; 3. If you are afraid of buying a fake, you can buy it in the store of Dongpeng tile.

How to identify the authenticity of Dongpeng tiles.

Dongpeng tile is a first-line brand, therefore, there will be some fake Dongpeng tile on the market, Dongpeng tile authenticity identification method is as follows: 1, look at the quality, in general, the quality of the brand tile is very good, knocking on the tile will make a crisp sound, the more brittle the sound, the better the hardness quality; 2. Look at the anti-counterfeiting logo, the general brand tiles will do the anti-counterfeiting logo on their own tiles, Dongpeng tiles 30 * 30 have marks in the middle, and 80 * 80 Dongpeng tiles generally have marks on the four corners; 3. If you are afraid of buying a fake, you can buy it in the store of Dongpeng tile.

What is marked on the back of 80x80.

A brand logo.

Marked with what. Brand name.

Summary. Hello! The following is how to distinguish the authenticity of Dongpeng tiles:

1.Purchase through official channels: It is recommended to purchase through officially certified Dongpeng tile sales channels, which can ensure the purchase of **.

2.Observation packaging: Dongpeng ceramic tile packaging will have product model, specification, batch number, production date and other information, should pay attention to whether the information is complete and clear.

3.Observe the surface of the tile: The surface of Dongpeng tile should be flat, smooth and flawless, with clear and uniform color, no color difference and spots.

4.Observe the back of the tile: The back of the Dongpeng tile should be flat and even, with no obvious cracks or damage.

5.Check the product identification: The product identification of Dongpeng ceramic tile should be clear and legible, including the brand logo of "Dongpeng tile", product model, specifications and other information.

It should be noted that if there are quality problems or doubts about the purchased Dongpeng tiles, you should contact the seller or manufacturer in time to return or exchange the goods or conduct further certification inquiries.

Hello! The following is how to distinguish the authenticity of Dongpeng tiles:1

Purchase through official channels: It is recommended to buy through the official Dongpeng tile sales channel that accompanies the burial certificate, so as to ensure the purchase of **. 2.

Observation packaging: Dongpeng ceramic tile packaging will have product model, specification, batch number, production date and other information, should pay attention to whether the information is complete and clear. 3.

Observe the surface of the tile: The surface of Dongpeng tile should be flat, smooth and flawless, with clear and uniform color, no color difference and spots. 4.

Observe the back of the tile: The back of the Dongpeng tile should be flat and even, with no obvious cracks or damage. 5.

Check the product identification: The product identification of Dongpeng ceramic tile should be clear and legible, including the brand logo of "Dongpeng tile", product model, specifications and other information. 6.

Through the certification inquiry: through the Dongpeng tile official ** or other certification ** Lu Mao query whether the Kuanyu products have been certified, so as to determine the authenticity of the product. It should be noted that if there are quality problems or doubts about the purchased Dongpeng tiles, you should contact the seller or manufacturer in time to return or exchange the goods or conduct further certification inquiries.

Summary. Hello! Dongpeng tile is a first-line brand, therefore, there will be some fake Dongpeng tile on the market, Dongpeng tile authenticity identification method is as follows:

1. Look at the quality, under normal circumstances, the quality of the brand's tiles is very good, knocking on the tiles will make a crisp sound, the more brittle the sound, the better the hardness and quality; 2. Look at the anti-counterfeiting logo, the general brand tiles will do the anti-counterfeiting logo on their own tiles, Dongpeng tiles 30 * 30 have marks in the middle, and 80 * 80 Dongpeng tiles generally have marks on the four corners; 3. If you are afraid of buying a fake, you can buy it in the store of Dongpeng tile.

How to distinguish the authenticity of Dongpeng tiles.

Hello! Dongpeng tile is a first-line brand, therefore, there will be some fake Dongpeng tile on the market, Dongpeng tile authenticity identification method is as follows: 1, look at the quality, in general, the quality of the brand tile is very good, knocking on the tile will make a crisp sound, the more brittle the sound, the better the hardness quality; 2. Look at the anti-counterfeiting logo, the general brand tiles will do the anti-counterfeiting logo on their own tiles, Dongpeng tiles 30 * 30 have marks in the middle, and 80 * 80 Dongpeng tiles generally have marks on the four corners; 3. If you are afraid of buying a fake, you can buy it in the store of Dongpeng tile.

Can you help me see if it's real or fake?

Dear, wait a minute, I'll check.

According to the ** product number and batch number are true, produced by Foshan, Guangdong.

1. Inspection label: The product packaging box should have the factory name, factory address, product name, after-sales service, specifications, quantity, trademark, production date and the implementation of the standard, for porcelain tiles, need to check the CCC certification mark, interior design decoration of ceramic tiles, it is advisable to choose radionuclides that meet the requirements of class A products.

2. Take a closer look at the appearance: the glaze of the ceramic tile should be smooth and delicate, the glossy glaze should be crystal shiny, and the matte glaze should be soft and comfortable. Under sufficient natural light or fluorescent lighting, the brick should not be visible if viewed vertically at a distance of 1 meter, and no obvious glaze defects should be visible.

Patterned brick pattern should be delicate and other defects. The shading, trademark, etc. on the back of high-quality ceramic products are clear and complete, and there are few glaze marks or defects.

3. Weigh the weight: check the weight of the tile, generally speaking, the same specification of the tile, the weight of the water absorption rate is low, and the internal quality is also better.

That's generally the case. There is no such thing as truth or falsehood, only good and bad. Generally speaking.. The four corners are if they are uneven.

Inside,,That may be your brick is not good geometric size,It is recommended to see if the four corners and the middle are bulging.。。 It's also a good idea to knock on the sound and listen to it. Generally speaking..

The quality of Dongpeng's bricks is still trustworthy. When you paste it, take the card well, and it looks very good.

The back of the brick has the logo of Dongpeng ceramics, 800*800 is generally marked at the four corners, and 300*300 is marked in the middle. Of course, there will be some differences in the number of marks and different styles, but they will all be there.

It is recommended that you pass through the brightness of the brick needs to be soft, the grain is clear, there is no mistake, mixed, and you can see again whether the four corners of the brick reach 90 degrees, there is no missing angle, and there is a very clear sound when you hit the brick to prove that its quality is very good.

Summary. Kiss, hello, I am happy to answer for you, Dongpeng tile to distinguish the authenticity of the method 1, listen to the sound: knock on the tile to listen to its sound, the more crisp the sound, the higher the porcelain, the higher the density, the better the quality.

2. Measure the size: take a brick to measure whether its side length meets the requirements, and then take several bricks and stack them together to compare whether their size is consistent. 3. Look at the appearance:

Observe whether the surface of the tile is delicate and uniform, and observe whether the product has obvious defects such as missing glaze, spots, cracks, etc., and the above defects can never be selected. 4. Look at the trademark: Dongpeng tile base has clear trademark marks, and the trademark marks of fake products are particularly vague.

5. Look at the outer packaging: Dongpeng ceramic tile outer packaging box are trademarks, product names, product models, product sizes, product grades, manufacturer addresses, contacts, product instructions, implementation standards, etc.

Kiss, hello, I am happy to answer for you, Dongpeng tile to distinguish the authenticity of the method 1, listen to the sound: knock on the tile to listen to its sound, the more crisp the sound, the higher the porcelain, the higher the density, the better the quality. 2. Measurement size:

Take a brick to measure whether its side length meets the requirements, and then take several bricks and stack them together to compare whether their size is consistent. 3. Look at the appearance: observe whether the surface of the tile is delicate and uniform, and observe whether the product has obvious defects such as lack of glaze, spots, cracks, etc., and the above defects can never be selected.

4. Look at the trademark: Dongpeng tile base has clear trademark marks, and the trademark marks of fake products are particularly vague. 5. Look at the outer packaging:

Dongpeng ceramic tile outer packaging box are trademarks, product names, product models, product sizes, product grades, manufacturer addresses, contacts, product instructions, implementation of standards and so on.

It's not true.

Dear, it's true.

Dongpeng ceramic tile outer packaging box are trademarks, product names, product models, product sizes, product grades, manufacturer addresses, contacts, product instructions, implementation of standards and so on.

That's how much a piece.

It's 50 yuan a piece, 800 800 specifications.

Summary. How to look at the anti-counterfeiting label: Dongpeng tiles have the service logo of Dongpeng tiles behind them, 800 * 800 generally have marks in the four corners, decoration renderings, 300 * 300 in the middle of the mark.

Of course, there will be some differences in the number of marks in different styles, but there will be Dongpeng tile logos.

Take two bricks face to face and see how big the gap between the two bricks is, and the bigger ones are. Open the back of the brick with five fingers deeply, and use the other hand to knock on the front of the five fingers ** to listen to the sound of crispness; You can also pour some water on the reverse side of the brick to see if the water seeps fast, how much it seeps, and if it does not seep fast, it is better.

How to distinguish the authenticity of Dongpeng tiles.

How to look at the anti-counterfeiting label: Dongpeng tiles have the service logo of Dongpeng tiles behind them, 800 * 800 generally have marks in the four corners, decoration renderings, 300 * 300 in the middle of the mark. Of course, there will be some differences in the number of marks in different styles, but there will be Dongpeng tile logos.

Take two bricks face to face and see how big the gap between the two bricks is, and the bigger ones are. Open the back of the brick with five fingers deeply, and use the other hand to knock on the front of the five fingers ** to listen to the sound of crispness; You can also pour some water on the reverse side of the brick to see if the water seeps fast, how much it seeps, and if it does not seep fast, it is better.

Dongpeng tile how to check the anti-counterfeiting tile color uniformity, high finish, good flatness, with knuckles gently tap the surface of the tile, the more crisp the sound, a small amount of water can be poured on the back of the tile, the higher the accuracy of the side length of the tile, the better the effect after paving. 1.Take a look at the uniform color, high finish and good flatness of the tiles, and take out four or five pieces from a box to inspect.

2.Listen to the crisper the sound of gently tapping the surface of the tile with your knuckles, the higher the degree of porcelainization. 3.

Try pouring a small amount of water on the back of the tile, generally speaking, the slower the water absorption, the denser the tile. 4.Measure the accuracy of the side length of the tile, the better the effect after paving.

I hope I can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best and a happy life.