How can the interior be designed to bring in more natural wind?

Enhance natural ventilation with advanced technology. The former is an advanced technology commonly used in today's ecological buildings, which can well solve the problem of turbulence caused by excessive wind speed caused by excessive wind pressure and heat pressure in high-rise buildings while maintaining the lightness of the appearance, and open windows for ventilation at night.

Design the building in an orderly manner. In the design, it is necessary to avoid the height of the building as much as possible, and to achieve the height and order to avoid the obstruction of the wind direction between the buildings. The layout of the overall design building complex should follow the dominant wind direction in summer as much as possible, and the buildings near the dominant wind direction should be low-rise or multi-storey, and the buildings far away from the dominant wind direction should be small high-rise or high-rise, so that the natural wind can be introduced into the area and the cold north wind in winter can be blocked.

The air circulation in the room is convection, and there needs to be air inlet and exhaust places. In a small apartment, according to the location, from the wall other than the window wall, open a hole and add an exhaust fan to achieve strong exhaust air and achieve the purpose of air convection. The fan used is not necessarily very large, just a small round exhaust fan with a 100mm aperture (as shown below).

The walls of commercial houses are less facing. If there is nowhere to choose, you can consider the partition wall with the bathroom, there is a flue to use the flue, and there is no flue that can be led into the flue with an air duct.

This first depends on your house type, if your house type is just the above look, it is recommended that you open a small sliding window on the wall next to the door, 20 cm from the top, and install anti-theft windows and screen windows at the same time. This increases the ventilation of the entire room.

Increase the spacing of buildings appropriately. In the design of residential buildings, the spacing of some buildings should be appropriately increased, and the green space of the group should be planned to be formed, which will not only improve the natural ventilation of the residential buildings on the downwind side of the green space, but also provide a good place for residents to rest and communicate.

It is recommended to choose the shutter type as much as possible, which can maximize the use of the lighting function of the window and improve the quality of indoor lighting and the overall atmosphere.

In general, maintaining natural light sources and respecting the existing lighting methods of the design is a principle that should be followed in interior design. As a result, natural light in the interior is not only functional, but also designable and enhances living comfort.

Maintain the design of structural openings. The size of the building's openings, the type of windows, and the ratio of window-to-wall area are also very important to the air flow and ventilation effect inside the building. Engineering practice shows:

When the opening width is 1 3 2 3 of the width of the opening, and the opening size is 15 -25 of the total floor area, the air inlet and the air outlet are relatively staggered and arranged, which can make the indoor airflow more uniform and the ventilation effect better.

Effect of wind direction projection angle on natural ventilation. The wind projection angle is the angle at which the wind projection ray intersects with the normal of the house wall. The design should avoid the long axis of the house perpendicular to the prevailing wind direction in summer, in order to allow good ventilation and convection between the front and rear buildings.

The building is best ventilated at the angle of incidence with the wind direction.

The room should be ventilated in time. In the season of resurgence, pay attention to control the time of opening doors and windows. Usually, we all have the habit of waking up in the morning to open the window.

However, during the return season, this habit is not practical. The correct way is to open all the doors and windows at noon or in the evening around the early morning and evening, and if possible, it is best to open all the doors and windows at noon or when the weather is fine, so that the air in the house can circulate and the moisture can evaporate.

When regulating it, it is necessary to pay attention to the location of it and the relationship between the interior, so that it is possible to be people-oriented. The line of sight can be extended through multiple spaces through the opening to the outside of the window, so as to increase the sense of transparency of the space. Whether in front of the window or elsewhere, you should have a good view when sitting or standing, and you should be able to open the window to the beautiful scenery as much as possible.

Reasonable and scientific ventilation: do not open windows for ventilation when the humidity is high, do not open windows for ventilation during thunderstorms, and do not open windows for ventilation when the air humidity is at the highest value at noon, so as to reduce water vapor entering the room. Open windows for ventilation, and open windows in time to adjust indoor air in the morning, afternoon or evening when the weather is relatively dry.

Renovation of the window can directly solve the problem, fundamentally eliminate the difficulty of not being able to ventilate, but this method needs to be carried out under the load-bearing structure of the house without breaking, and it also needs to be selected according to the direction, so it is more difficult. Now the integrated bath bomb ceiling also has this function, many famous brands have this aspect of the design considerations, the disadvantage is that the exhaust of the bath bomb is not the main function, and the efficiency is low.

Use moisture-absorbing materials: The more common moisture-absorbing products such as humidity absorption boxes and activated carbon on the market are generally made of calcium chloride granules as the main content, integrating dehumidification, aromatic, anti-mildew, deodorization and other functions. Moisture absorber boxes are mostly used for moisture absorption in wardrobes and shoe cabinets.

To use it, simply put it in the cabinet. Quicklime can be wrapped in cloth or sacks and placed in various parts of the room to keep the indoor air dry.

If you are drying on a closed balcony, please close the door connecting with the room to prevent moisture from entering the room. Indoor plants should be placed on the balcony or living room as much as possible, with as little watering as possible, and if there is a terrace, try to place it on the terrace. Remove moisture from the room, especially the bathroom and kitchen, in a timely manner, and use ventilation fans and ventilators frequently for ventilation and ventilation.

Remove the stagnant water in the bathroom in time to ensure that the floor of the bathroom kitchen is dry.

The relationship with the outdoor unit of the air conditioner should also be properly solved, not only to consider the aesthetics, but also to the line should also have a covering effect, but also to consider the height of the outdoor unit of the air conditioner, to avoid being able to see directly indoors, resulting in a sense of visual blockage, in addition, the ventilation fan of the outdoor unit should be avoided facing the window to prevent the hot air from blowing into the room.

At present, there are three types of household exhaust fans on the market: ceiling type, wall-mounted type and window type. They are ceiling-mounted exhaust fans, wall-mounted exhaust fans and window-mounted exhaust fans, and the three types of exhaust fans have their own advantages.

The ceiling exhaust fan has a good appearance and can be installed on the ceiling of the bathroom. The ventilation fan has a short duct, so it is necessary to purchase a ventilation duct to match the duct when installing.

This major belongs to building equipment and environmental engineering in the civil engineering category, and the professional courses mainly include HVAC (including ventilation engineering, heating and heating engineering), refrigeration, boiler and boiler room design, architectural introduction, building electrical, indoor water supply and drainage, professional testing technology, building automation, HVAC engineering design methods and system analysis, professional calculation methods, etc.

Wall-mounted exhaust fans are small enough to be embedded in the wall, but they are only suitable for installation in smaller bathrooms due to the narrow cross-section of the exhaust vents, which results in weak ventilation.

The window exhaust fan is different from the first two, there are single and double two-way operation modes, which can not only exhaust the indoor air, but also supplement the outdoor fresh air to the room, therefore, the window exhaust fan has a larger application range and better effect.