How to disassemble the Honda CRV2 4 air conditioner compressor

The belt is removed, the snow is sled, the compressor pipe head is released, and the four screws of the compressor are removed and taken down.

Honda (Honda Motor Co., Ltd.) is a Japanese multinational transportation vehicle and machinery manufacturing company. Founded in September 1948 in Hamamatsu City, Shizuoka Prefecture, Japan, and headquartered in Tokyo, Japan, the company is the world's largest motorcycle manufacturer, as well as the world's largest manufacturer of internal combustion engines. Its main business is the production of automobiles, motorcycles, engines, aircraft and electrical equipment.

Honda Development History:

Honda was founded in September 1948, the full name of Honda Motor Company is "Honda Motor Co., Ltd.", this research institute mainly produces textile machinery. At that time, the war had just ended, and all kinds of goods were very scarce, and many families had to go to the black market or even the countryside to buy ** food.

Due to the lack of transportation, the frequent movement of people has overcrowded various means of transportation, such as cars and trains, and the rugged mountain roads in Japan make it very difficult to collect food by bicycle.

When Soichiro Honda saw this, he immediately thought of the many radio communication machines left behind by the Army during the war. So, he bought a batch of communication machines at a low price, removed the small gasoline engine on it, and used a kettle as a fuel tank, transformed it into a small gasoline engine, and installed it on a bicycle to make a new type of "machine bicycle". Since the product was marketable, it immediately became a hot item.

First of all, the fluorine is discharged from the high and low pressure of the maintenance valve, the second step is to remove the No. 10 fixing screw on the radiant electronic fan of the water tank, then break the electromagnetic coil of the compressor clutch, then remove the high and low pressure pipe on the compressor, and then pull out the high and low pressure pipe and wrap it in a plastic bag to avoid entering the debris, and then remove the four 12-gauge screws that fix the compressor, and take it out from between the engine and the water tank after removal. When installing, pay attention to the hook on the compressor to the hook on the engine.

Dear, I'm glad to answer for you. Honda CRV air conditioner evaporator disassembly solution: Dongfeng Honda CR air conditioner evaporator box open the cover and unscrew the screws from the side of the air conditioner to remove.

1. Remove the universal joint screws first, so that the universal joint of the variable speed state cavity and the transmission shaft is separated; Then remove the clutch cover screws to separate the transmission and clutch; In the case of a remotely operated transmission, the control mechanism is separated from the transmission body, and finally the transmission is removed from the car. 2. Clean the sludge and dirt on the outside of the transmission, and pay attention to protect the front and rear shaft heads. 3. Unscrew the oil drain plug, clean the lubricating oil in the transmission, and then the arpeggio oil plug.

4. Find a clean and dust-free place, use disassembly tools and copper rods, and start disassembling the transmission. The disassembly sequence is generally: transmission cover, first shaft, second shaft, intermediate shaft, reverse shaft.

5. When disassembling parts, first look at the original direction and position of the parts before disassembly, and if necessary, make a record; The dismantled parts are arranged neatly in the order of disassembly, and each part can be strung together in order with wire or wire if necessary; The gears can be sleeved on the shaft in the original direction and position to prevent misinstallation or missing installation. 6. All parts of the disassembly should be cleaned and inspected accordingly, and those that cannot be used should be replaced; The disassembled oil seals and gaskets should generally not be used again, and the shirt should be replaced.

Hello, 11 years Honda CRV starter disassembly and assembly method: 1. Connect the large metal shell of the starter (such as the screw through the Ding hole) to the negative pole of the battery, (it is best to use a connection wire to connect to the shell of the starter), and there are two large screws on the starter magnetic switch; Type 2, you carefully observe that one of them has been connected to the motor of the starting training machine, and the other empty screw is connected to the positive pole of the battery (it is best to use the connecting wire); 3. There is also a small thin screw, you use a thin wire to connect it to any place on the positive wire of the battery, the starter can work, and the starter will stop working when you disconnect it.

1.Locate the detachable section around the air conditioner panel, usually located above or below or on both sides of the panel. These covers may be secured with screws or with snaps.

2.If it is fixed with screws, you will need to remove it with the correct size screwdriver. If fastened with snaps, it is recommended to discreetly remove it from the panel using a plastic removal tool to avoid damage to the surrounding components or panels.

3.Once you've done a great job removing the covering, you should be able to see the set screws underneath the panel. Use the correct size screwdriver to loosen them and remove the panel from the dashboard.

4.Be careful not to remove the panel too violently to avoid damage. In addition, make sure that the air conditioning system is turned off to avoid freon leakage due to misoperation of the flushing.

To dismantle the CRV, the steps are the same as those for the Camry, but it is simpler, because the clips on the left and right sides of the upper edge of the glove box are relatively looser, you only need to open the glove box and remove the damping buckle at the bottom of the right side.

The latter two hands hold the upper edge and the lower edge of the glove box respectively, and the hand squeezes from the upper edge to the lower edge to cause the upper part of the glove box to be recessed, and the glove box can be removed by pulling down the glove box; The cover of the cabin air filter is exposed inside, one on both sides.

Squeeze it, you can remove the cover, dial out the old air conditioning filter, replace it with a new one, reset it as it is, and replace it.

I took out the air conditioning filter, at first glance, the color is black, and I still think that the original factory uses an air conditioning filter with activated carbon, and then look closely, I found that there are a little whitish fibers on the side; It turns out that the original factory still does not use activated carbon.

The white air conditioner filter has now turned black, so how can it still be used. Think about yourself over the years, you have used many brands of filters for your car, you can think of Sofima, Ebenma, Bosch, etc., and the others are.

High imitation, that is, I haven't used 3m, think about the air quality is too bad now, I also have a luxury, to buy the most expensive 3m to replace, it cost 55 yuan single effect. In the end, I decided not to buy a double-effect with activated carbon, because I brought it.

Activated carbon, which affects the air penetration ability and increases the burden on the blower.

For many years, when replacing the air conditioner filter, I washed the air conditioning system with air conditioner cleaning agent, but I also encountered suspected damage to the blower (Camry successfully claimed within the three-year warranty); So this time I didn't have a new CRV.

Dare to wash the air conditioner, but just wipe it with a rag, of course, it can't be wiped. In this case, the owner of the physical store that sells my air conditioning filter (of course, he is also the ** owner), he also told him to clean the air conditioning blower of the car by himself.

It was broken, and finally cleaned the lower carbon brush to return to normal. I hope this will attract the attention of riders who like to do it themselves.

I forgot to say, mine yes, I always heard that the 12 CRV and the old air conditioning filter are different, take it out and measure the size, it is the same. The last thing I used was an Accord filter.