How do you mix lilac pink? What color is pink and purple?

The visible colors in nature can basically be mixed from red, yellow, and blue, and the same is true for purple. If you want to make a lavender, you only need to add a little white pigment on the basis of the original purple to make the purple lighter, and the more white you add, the more pink the purple will be.

First in the palette.

Start with an appropriate amount of paint and then squeeze a little white paint on top and mix well with a brush. You'll be able to get the lilac you want. If there is no purple pigment around, we can first use the positive blue and red pigments according to the ratio of one to one, mixed and modulated, the purple of this concoction is usually not luster, darker, we add a small amount of white pigment to it and mix evenly to make light purple.

The amount of white pigment added to the purple can be added according to the needs of the color shade of the lilac you want, and the more white pigment you add, the more pink and white the prepared lilac will be. In addition, we should all know that the color of purple will be different when different reds and blues are blended. For example, purple made with a mixture of greenish blue and positive red pigments will be very bright.

In general, lavender pink is made of purple and pink, according to the ratio of 1:1, plus a little white, so it is better to learn professionally in the process of using and modulating different colors.

Answer: How to adjust the lilac pink - red, sky blue, white red sky blue ratio is best: 7:3, white according to the degree of pink appropriate.

The ratio of red, sky blue, white and red sky blue is best: 7:3, and white is appropriately added according to the degree of powder. When matching colors, in order to compensate for the monotony of the tone.

Purple pink and a little white, try it slowly than yourself, and slowly find the color you want.

There is more than one solution to this problem, and I think the solution I am thinking about will not solve your problem accurately, and the detailed answer needs to be thought of by yourself.

Pink plus purple is: pink-fuchsia. Pink is purple when it is toned with blue.

Pink belongs to the red color, but it is lighter than the red color, so it is called pink. When it is mixed with blue, it becomes purple. The mixture of purple and pink may be light purple and red, depending on the proportion of these two colors.

Principle

The three primary colors are: red, yellow, and blue. Red + Blue = Purple:

Red plus blue, the more blue you put in, the more purple the color, little by little in the red add blue-red + a small amount of blue + add white = pink: the more white, the more pink, purple + pink = red + blue + white mixed in different proportions, the color displayed is also different.

Fuchsia blending method:

1.Blue plus red, fuchsia = pure purple + rose red, pink purple = pure white + pure purple.

2.Gouache mixing: red + blue = purple, purple phalaenopsis: purple plus rose red socks to attack the core, you can add a little white appropriately.

3.There is purple in the gouache paint, and you don't need to mix the color, you can use it directly.

4.Violet is purple, no need to mix color, just gouache.

5.Add a little blue lotus color Zen rock to make the color lighter, and you can also add a little white.

6.Use a purple-ting-tinge blue, not a greenish blue, so that the purple tone will be brighter.

Hope the above information can help you solve the problem. Please feel free to let me know if you have any other questions.

Light pink color method: select the red pigment, mix the selected red pigment, extrude the white pigment, and mix the pigments.

1. Choose red pigments

Different shades and saturations of red and white are mixed to create different shades of pink. You can experiment with different reds until you find the color that matches your needs in terms of saturation and brightness. You can start with permanent alizarin crimson or phthalocyanine acrylic pigments and blend them with titanium white pigments in different proportions.

Cinnabar red can be used to create a more positive pink. The pink tone of brick red is slightly cloudy, close to peach. Darker reds, such as deep red, have blue or purple in them, so if you want to make a pink close to magenta, dark red is more appropriate.

2. Mix up the selected red pigment

It can be done on canvas, paper, or on a palette. Squeeze out the selected red pigment. Because you have to mix the color later, don't forget to separate the extruded pigment tube from the rest of the pigment, and add more if you need more after cleaning.

3. Extrude the white pigment

Extrude the white pigment next to the red pigment. Just squeeze out a little bit at first. When mixing with red pigments, you can always add them when you don't have enough to bring out a lighter pink.

4. Mix the pigments

Using a brush or palette knife, mix the white pigment into the red pigment, adding a little less at first, depending on the situation, and how much to add to achieve the desired effect. If you want a lighter pink, add a little more white. However, each different red staining degree is also different, so the final effect depends on the situation.

The darker the red you choose, the more white pigment you need to add if you want a lighter shade. If you want a pink hue close to peach or salmon, you can add a small amount of yellow. If you want to get close to the fuchsia pink, add some blue or purple pigments.

Operating Tools: Light and Shadow Magic Hand.

1. First click the [Open] option <> above the [Light and Shadow Magic Hand].

2. Load the ** that needs to be processed.

3. Click the [Basic Adjustment] option in the upper right corner of the [Light and Shadow Magic] <>

4. Click the [Color Balance] option in the menu list below.

5. Set the parameters as follows in [Color Balance].

6. Click the [Levels] option in the menu list below [Basic Adjustments] <>

7. Set the parameters as follows in the [Levels] menu list.

Blue and red Fuchsia = Pure Purple + Rose Red Pink Purple = Pure White + Pure Purple Gouache Blend: Red + Blue = Purple. The purple kind of phalaenopsis: purple with rose red, you can add a little white.

There is purple in the gouache paint, which is violet. You don't need to mix colors, you can just use them. This color is rarely used in general gouache, and if you don't get it right, it will look dirty.

If you want to make the color emphasis, you may wish to add some blue lotus color. If you want to make the color lighter, just add some white. Watercolor blending: Use a blueish madder or rose red, not a yellowish orange color.

Blue should also choose a purple-biased blue, not a greenish blue, so that the purple tone will be brighter.

Red is more and blue is less, or you can add red to a purple part, or the simplest is to add purple to rose red. This is the most incidental, if the rose red, with purple on top, it may be darker. If it is rose-red, it is relatively light.

To adjust the light purple, you can add a little white pigment on the basis of the original purple, which can make the purple lighter, and the more white you add, the more pink the purple will be blended. When mixing colors, you can squeeze purple pigment on the palette, and then squeeze a little white pigment on top of it, and mix it well with a brush.

Red and blue turn purple. Since we can't determine the shade of purple after they are mixed, we use a pen to mix a small amount of blue and red respectively, and when we debug our ideal purple, we do a lot of debugging.

In the process of re-debugging, be sure to mix the two colors evenly. Do not add another color again before it is evenly mixed, otherwise it will change the shade of the mixed color, or when painting, the color will be uneven, which will affect the beauty of the painting.

The three primary colors of the light guard

The three primary colors of light, mixed in a certain proportion, can present a variety of light colors. According to the results of Thomas Young and Helmhause, the three primary colors were identified as red, green, and blue (equivalent to the color sensation of red, medium green, and ultramarine (violet-blue) in pigments).

The color TV screen is composed of three luminous color dots: red, green, and blue. By mixing these three primary colors in different proportions and strengths, various color variations in nature can be produced. The three primary colors of pigments and other non-luminous objects are magenta (equivalent to rose red, pink), primor, sequoise (equivalent to darker sky blue, lake blue), and light yellow (equivalent to lemon yellow).

Pigment palette.

Ripe brown = lemon yellow + pure black + rose pink rose red = pure white + rose red.

Vermilion = Lemon yellow + rose red.

Dark Red = Rose + Pure Black.

Purple Red = Pure Purple + Rose Red.

Chu Shi Red = Rose Red + Lemon Yellow + Pure Black Pink Blue = Pure White + Sky Blue.

Blue-green = grass green + sky blue.

Gray-blue = sky blue + pure black.

Light Grey Blue = Sky Blue + Pure Black + Pure Purple Pink Green = Pure White + Grass Green.

Yellow-green = lemon yellow + grass green.

Dark Green = Grass Green + Pure Black.

Pink violet = pure white + pure purple.

Brown = Rose Red + Pure Black.

Pink Tartramine = Lemon Yellow + Pure White.

Garcinia cambogia = lemon yellow + rose red.

Orange = Lemon Yellow + Rose Red.

Earthy Yellow = Lemon Yellow + Pure Black + Rose Red Hand-Painted Pigment Palette.

Rose + Yellow = Bright Red (Vermilion, Orange, Garcinia Cambogia) Vermilion + Black, Small = Brown.

Sky Blue + Yellow = Grass Green, Baby Green.

Sky Blue + Black + Violet = Light Blue-Violet.

Grass green + a small amount of black = dark green.

Fuchsia with white, I think lavender is purple-pink.