What is the function of the front hit wheel?

Updated on Car 2024-07-08
9 answers
  1. Anonymous users2024-02-12

    The biggest feature of the front wheel is that there is no speed ratio, that is, the length of the line you retract when you shake the wheel is the circumference of the wheel axle. Both spinning wheels and drop wheels have a speed ratio device, which means that when you shake the take-up handle, you can retract more than one circumference of the axle!

  2. Anonymous users2024-02-11

    Generally, the line from the front of the wheel is called the front wheel, the advantage is that the line is fast, mainly used for fast, repeated throwing rods, like lure rods.

  3. Anonymous users2024-02-10

    Yichang fishing friends have a rod before use, please Yichang fishing friends help talk about it.

  4. Anonymous users2024-02-09

    1. Choose a fishing rod.

    Generally speaking, you can't cast it when you use the front wheel for fishing, and even if you can cast it, you can't throw it far.

    2. The front wheel is more suitable for fishing in current waters such as marine fish, and the resistance is large.

    3. Generally, the front round is not suitable for throwing, but pulling out a hand of line to go out at an appropriate time.

    4. Next, you need to manually lead the wire to make the line lead farther.

    5. Casting requires holding the fishing rod in a standing position and throwing the rod vigorously to throw it farther away on the water.

    6. The front wheel throwing is not far away, and it stands to reason that it is not suitable for throwing and putting the line.

    It is better to fish with a manual lead.

  5. Anonymous users2024-02-08

    It is like this, the front rod is softer, and the line ring is very small, the front end of the rod guide ring resistance is large, can not be thrown, the front rod is mostly used in foreign countries for stream road fishing method, also known as fly fishing method, to pull the line, straight up and down, when fighting fish, the feel is strong, the resistance of the line is much greater than the rock rod, if the spinning wheel with a larger pace is larger, it is easy to break the pole when the line is quickly reeled, so the front rod with a slower front wheel is the most suitable. I haven't used the kind of rod you mentioned, so it's hard to say. Go to the Angler** to see the answer details".

  6. Anonymous users2024-02-07

    1, a kind of reel, fishing friends also called cake wheel, officially should be called drum reel, many times to use a half-feel way, that is, the other hand to pull out a piece of line, with the rod shaking and release the line, so that the bait produces the action of attracting fish, and in the black sea bream when the fish is sensitive to eat bait, you can also send the line to make the fish lose vigilance.

    2, the front rod is softer, and the ring over the line is small, the front end of the rod guide ring resistance is large, can not be thrown, the front rod is mostly used in foreign countries for the stream road fishing method, also known as fly fishing, to pull the line, straight up and down, when fighting fish, the feel is strong, and the resistance of the line is much greater than that of the rock rod.

  7. Anonymous users2024-02-06

    The front rod is softer, and the ring is small, the front end of the rod is more resistant, can not be thrown, the front rod is mostly used in the stream lure fishing method, also known as the fly fishing method, to pull the line, straight up and down, the feeling is strong when fighting fish, the resistance of the line is much greater than that of the rock rod, if the spinning wheel with a larger pace is larger, it is easy to break the pole when the line is quickly reeled, so the front rod is the most suitable for the front wheel with a slower reel.

  8. Anonymous users2024-02-05

    I don't know if you've ever seen one of those high-end fishing rods, where there's a wheel-like disc a little above the handshake, with a lot of threads and some mechanics that can be shaken by hand.

  9. Anonymous users2024-02-04

    Summary. In general, it is better under the wheels. Because the underside of the wheel can provide better support, it can better resist external forces, reduce friction, and improve the efficiency of the outlet.

    In addition, the lower part of the wheel can better protect the outlet line from the ingress of dust and contaminants from the outside, thus extending the service life of the outlet line. In addition, the lower part of the wheel can better protect the outlet from the ingress of dust and contaminants from the outside, thus extending the service life of the outlet line. In short, it is better under the wheel, which can better protect the outlet, improve the efficiency of the outlet, and prolong the service life of the outlet.

    In general, it is better under the wheels. Because the underside of the wheel can provide better support, it can better resist external forces, reduce friction, and improve the efficiency of the outlet. In addition, the front under the wheels can better protect the outlet line from the incoming dust and contaminants, thus extending the service life of the exit line.

    In addition, the lower part of the wheel can better protect the outlet from the ingress of dust and contaminants from the outside, thus extending the service life of the outlet line. In short, the lower part of the wheel is better, which can better protect the outlet, improve the efficiency of the collapse of the outlet, and prolong the service life of the outlet.

    Can you add, I don't quite understand it.

    Generally speaking, the underside of the wheel is better, because the underside of the wheel can better support the wheel and reduce the friction of the wheel, thereby improving the service life of the wheel. Reasons for the problem:1

    The support force above the wheel is insufficient, and the friction of the wheel increases, which can easily lead to wheel wear; 2.The support force above the wheel is insufficient, and the friction of the wheel increases and is extremely large, which can easily cause the wheel to slide and affect the driving safety. Workaround:

    1.Install the wheels under the wheels to increase the support force of the wheels and reduce the friction of the wheels; 2.Regularly check the support of the wheels to ensure the safety of the wheels.

    Personal Tips:1Try to install the wheels under the wheels to reduce the friction of the wheels; 2.

    The supporting force of the wheel refers to the supporting force of the wheel during driving, which is the key factor for the wheel to drive normally, and it is also an important factor affecting the service life of the wheel.

Related questions
20 answers2024-07-08

A legend about the Ferris wheel Lovers who ride the Ferris wheel together will eventually break up But when the Ferris wheel reaches its highest point If you kiss your lover, you will go on forever Legend has it that every box of the Ferris wheel is full of happiness When we look up at the Ferris wheel, we are looking up at happiness How high happiness is The Ferris wheel is as high as we want When we want to be happy but happiness has not come for a long time, try to get on the Ferris wheel and wait for it to slowly rise until the top Looking down at everything we see In fact, the happiness we want is very simple From there, people are very small, and I believe that although the world is big, there is always our simple happiness, so when we feel unhappy, try to ride the Ferris wheel, and wait for the so-called happiness height, and they say, "People who look at the Ferris wheel are looking at happiness."

6 answers2024-07-08

Domestic tires, made in Shandong. Exquisite! It is considered a domestic tire that is better.

17 answers2024-07-08

I just checked this for you because the jewelry has raw edges, so this situation is caused.

3 answers2024-07-08

This is the blood inheritance limit inherited by some of the best Uchiha clans in Konoha Village, according to Kakashi, the Uchiha clan is a branch of the Hyuga clan, and the Ba pattern in the eye is the characteristic of the writing wheel eye, which can see through all the ninja, body, and illusion. Combined with the Insight Eye, the Hypnotic Eye, the Copy Action, and the Copy Ninjutsu, the four abilities are one of them. The insight eye contained in the eye of the writing wheel is one and two in the pupil technique, which can see through all ninjutsu, body arts, and illusions in an instant, and can also see through the opponent's movements or attack tracks, or see through the opponent's defense methods, and avoid the avoidance actions of our attack tracks, etc., The ability to adapt to any situation and improve the caster's combat ability, so it was also given the title of "Sky Eye". >>>More

9 answers2024-07-08

The child was three years old and 9 months old and came into contact with roller skating, said he liked it, and signed up decisively, but the first class let him rest and did not rest, and the second class kept asking the coach when the class would end, hahahaha, this interest came quickly, and it went too fast. >>>More