How do you divide the fortune tree? What is the propagation method of Fortune Tree cuttings?

The soil inside the pot is dug up, and the close roots are separated by artificial means to plant. The method of cutting cuttings is to cut a branch with scissors, insert it in the soil and water it, and then it will germinate in half a month.

The propagation of the fortune tree can be divided into two propagation methods of sowing and cuttings, the general sowing method is used more, the cuttings propagation in the south is generally 3, 10 months for the survival rate is higher to use the cuttings method to propagate, first of all, we must choose the robust, disease-free plant top tip for cuttings, the cuttings are 10, 12 cm long, remove the leaves, cut off half of the large leaves, and at the same time the cuttings should be cut obliquely, in order to expand the root area of the cuttings, and then we should choose the right flower soil, choose the flower soil with good air permeability for the cuttings of the fortune tree, You can increase the success rate, and if you don't know what kind of flower soil to choose, you can use garden soil mixed with perlite.

There is also a point for the branching of the fortune tree, which is to prune the branches of the fortune tree with professional gardening shears, but pay attention to leaving 2-3 bud eyes on each branch as much as possible, so that the fortune tree can grow new branches in the future. Trim with sharp gestures to avoid injuring other areas.

For the Fortune Tree cuttings propagation method, the choice of soil quality is very important, the cut branches only need about a year of plant type, then it is easy to survive, 10 15 cm or so branches can be, it is best to cultivate roots in the coarse sand first, pay attention to keep the river sand slightly moist, the temperature is between 20 and 30 degrees is the most suitable, and there is a further introduction in the Fortune Tree germination method.

Don't throw away the pruned branches of the fortune tree, take cuttings to take root for half a month.

The propagation methods of fortune tree have sowing propagation, cuttings propagation, grafting propagation, and the commonly used propagation method is sowing propagation, cuttings propagation, wherein cuttings propagation is easy to take materials, and the probability of planting life is also very high, and many plants can be cultivated at the same time, it is best to carry out in spring or autumn, the climate is suitable, and the plant germination ability is also stronger, and the survival rate can be improved.

The propagation methods of fortune tree include sowing propagation, cuttings propagation, grafting propagation, and the commonly used propagation methods are sowing propagation and cuttings propagation, in which cuttings propagation is easy to take materials, and the probability of seed survival is also very high, and many plants can be cultivated at the same time.

1. Sowing and propagatingThe fortune tree can be propagated by sowing method, its seeds can not be left for too long, usually 9-10 months will bear seeds, after the seeds can be taken down, as soon as possible for sowing.

(2) Method:When sowing, water thoroughly to ensure that the soil is moist, and then sprinkle the seeds directly on the surface of the soil, cover the thin soil in the later stage, put it in a cool place, provide an environment of about 25 degrees, and take root in about a week.

2. Propagation by cuttingsFortune trees can be propagated by the rotation method of cuttings, to choose the right time, it is best to carry out in spring or autumn, the climate is suitable, the temperature is not high or low, and the plant is in the growing season, the germination ability is also stronger, and the survival rate can be improved.

(2) Method:The branches used for cuttings should be robust, semi-lignified, and 15-20 cm in length, and the upper leaves should be cut off after cutting, leaving a few pieces at the top to reduce nutrient consumption.

Generally, Susha Fiber Tung Width is used as nutrient soil, and it is best to water it once after insertion, and it is best to cover it with a transparent film, which can have a good moisturizing effect of destroying the brightness, providing an environment of 25 to 28 degrees, and it can take root in about half a month.

3. Grafting and propagationSome varieties of the fortune tree can be propagated by grafting, which has the advantage of maintaining the characteristics of the mother plant, which can usually be used in the month of the month.

(2) Method:Use the fortune tree itself as a rootstock, choose a young branch with 3 buds as a scion, operate it with a young branch splitting method, and put it in a plastic shed after grafting, which is done to avoid the newly grafted branches being rained, as long as you take care of it, it can grow into a sapling that year.

The best time for the fortune tree to take cuttings is in May and June every year, about a month or so will take root, it should be watered and fertilized in time after cuttings, about 30 days or so will take root, and the maintenance should have sufficient light environment, there is a rent and prudence in its growth and development, and to keep the soil moist, as well as enough nutrients, in ordinary times to prevent the damage of diseases and pests.

Fortune tree cuttings propagation method.

The best time for cutting is in May and June every year, and it will take about a month to take root. The specific cutting method of the fortune tree is as follows:

1. The branches used in the cuttings of the fortune tree should be relatively robust and free of pests and diseases, with a length of 6-7 cm.

2. The cuttings of the fortune tree are generally carried out in June, and the cuttings should be disinfected before cuttings.

3. The soil of the cuttings of the fortune tree must be loose and breathable, and fertile, and it must also be treated by exposure to the sun.

4. Finally, you can insert the branches of the fortune tree into the soil, and you need to pay attention to watering in time.

After the cuttings of the fortune tree should be watered and fertilized in time, it will take root in about 30 days, and there should be sufficient light environment when maintaining, which is conducive to its growth and development, and to keep the soil moist, as well as enough nutrients, to prevent the invasion of pests and diseases in ordinary times.

August cuttings.

Choosing the right time for cuttings is the first step in how to cut the branches, and it is also related to the survival rate of cuttings. Generally, the fortune tree is suitable for cuttings in May and August every year, and the climatic conditions and temperature at this time are more suitable for the growth of cuttings.

2. Prepare potting soil.

Fortune trees like to grow in loose and breathable potting soil, after knowing the growth habits of fortune trees, it is not difficult for us to know the answer to the question of is fortune trees easy to plant. Therefore, when choosing a substrate for cuttings, you can use coarse sand, vermiculite, and perlite according to 6:3:

The ratio of 1 is mixed evenly and set aside.

3. Select a branch.

Many flower friends fail to take cuttings in the selection of branches. It is best not to choose fresh shoots cuttings, it is suitable to choose the branches of the Fortune Tree potted spike when the semi-lignified branches, the length of the interception is about 7cm, and the lower part of the incision is obliquely cut to keep the incision smooth and free of cracks, and the disease prevention and control is air-dried in a cool and ventilated place.

4. Insert the branches into the soil.

Inserting cuttings into the soil is the last step of how to cut branches of the fortune tree. Use chopsticks to poke a small hole in the potting soil, put the cuttings of the fortune tree into it, and compact the surrounding substrate with your hands, water it thoroughly and place it in a cool and ventilated place to maintain, and it will be able to take root in about a month. If you want it to grow better, you also need to understand how to manage the domestic fortune tree, which needs to be watered every 2 to 3 days after cuttings.

1. The fortune tree likes high temperature, humidity and sunlight mapping, and every 3 to 5 days, the fountain with a spray bucket to the leaves is not only conducive to the implementation of photosynthetic effect, but also can make the branches and leaves look better. Ordinary seedlings are 40 to 50 cm tall.

2. Before transplanting seedlings and seedlings of fortune trees, it is necessary to cooperate with the manufacture of nutrient soil. Use 3 parts of humus soil, 2 parts of sand, 4 parts of garden soil, and 1 part of fully fermented organic fertilizer, mix and plant evenly. When transplanting, pay attention not to hurt the young roots, the depth of the original root base shall prevail, water thoroughly after planting, put it in a cool place to slow the seedlings, prevent direct exposure to the sun, and water it every day depending on the condition of the potting soil.

-30 degrees is also the temperature of the cutting of the fortune tree, in the summer of June to August cuttings of the fortune tree, the fortune tree will take root and germinate faster.

2. First of all, let's talk about cuttings, and the cuttings should be healthy and stout. After selecting the cuttings, it is necessary to cut the bottom of the cuttings into a horseshoe shape, which can increase the contact area between the cuttings and the soil, which is more conducive to the rooting of the fortune tree.

3. The choice of soil can be varied, such as river sand, garden soil, vermiculite, perlite, and peat.

4. Before cuttings, it can be soaked with rooting agent, and the proportion of water needs to be mixed with water according to the use method of each rooting agent. When soaking, a small amount of fungicide can be added, because the hot and high temperature is easy to breed bacteria in the soil, and the cuttings can be sterilized to reduce the generation of diseases.

5. After soaking, it can be directly inserted into the soil.

6. In the future, the breeding should be more astigmatism, through astigmatism farming, the cuttings of the fortune tree can avoid the loss of water in the branches due to strong light, resulting in dry branches, which is not conducive to rooting. Astigmatism promotes photosynthesis and synthesis of nutrients in the Fortune Tree, which increases the rooting speed of the Fortune Tree.

7. The tree takes root relatively quickly in summer, basically it can take root in 20 days, after rooting, don't move it first, wait for its roots to grow a little stronger and then transplant, generally 2 months is the best.