What materials are used to seal the balcony and construction precautions

Generally, the balcony can be sealed with plastic steel windows, aluminum alloy windows, practical windows, empty steel windows, at present, most of the family decoration balcony sealing, mainly using plastic steel windows and aluminum alloy windows.

Regardless of whether plastic steel windows or aluminum alloy windows are used, the size of the closed surface of the balcony should be accurately measured before sealing the balcony, and before installation, the size of the window should be checked to see if the size of the opening of the sealed balcony is consistent. Before installation, the base layer of the balcony opening should be cleaned, the base material of the window close to the wall should be removed, and holes should be punched at the fixed point, and expansion bolts or plastic expansion pins should be preset to fix the window.

When installing the window, the window should be firmly seated at the opening, and the position should be fixed with a wooden mold, the fixed steel plate on the window should be installed on the expansion bolt, fastened with a nut, and after all the fixed steel sheets are installed, the two sides of the hole should be smoothed with cement mortar, and all the fixed steel sheets should be buried in the cement mortar. After the cement mortar is dry and hard, the surface layer can be decorated, and the grout on the window frame should be wiped in time to prevent pollution of the window frame.

Nowadays, many people will choose to enclose the balcony and use the space of the balcony, which can save a lot of space. For example, it can be designed as a garden, a study, a small living room, etc. There are many materials for sealing balconies, and many people don't know which one to buy when facing so many materials.

What material is good for sealing the balcony.

1. Plastic steel windows.

Plastic steel window is a type of window that people often use, because it is better than other materials in sound insulation, heat insulation, fire prevention, air tightness, water tightness, anti-corrosion, thermal insulation and other properties, so it has been widely used for vertical decoration, but due to its large section, the lighting performance will be slightly worse than that of aluminum alloy windows.

2. Frameless windows.

Frameless windows have good lighting performance, can maximize indoor air convection, are very beautiful and easy to fold. Its disadvantage is that the sound insulation and heat retention are relatively poor.

3. Aluminum alloy.

The thickness of the aluminum alloy profile used for the enclosed balcony should be more than millimeters. It is more commonly used in the southern region and is suitable for sliding windows. Aluminum alloy has good fire resistance and aging resistance, and it is also quite beautiful when used as decoration.

However, it is poorly insulated.

4. Broken bridge aluminum alloy.

On the basis of ordinary aluminum alloy, a thermal insulation layer is added, and it becomes a broken bridge aluminum alloy. Its performance in sound insulation, heat insulation, fire prevention, air tightness and water tightness, anti-corrosion, heat preservation and other properties is very good, and it is not easy to deform and fade for long-term use. But ** is a bit more expensive than ordinary materials.

5. Solid wood windows.

The design of solid wood can create a variety of shapes, as well as a variety of colors, and it is highly decorative. However, wood has poor resistance to aging, heat resistance, and is prone to corrosion.

What do you need to pay attention to when sealing the balcony.

1. It is necessary to distinguish priorities and clarify functions.

Generally speaking, the current residence has 1-2 Yangyu Paitai, and before decoration, it is necessary to distinguish the main balcony and secondary balcony to clarify the function of each balcony. Generally, the balcony adjacent to the living room and the master bedroom is the main balcony, and the function should be based on leisure and fitness, which can be installed as a gym, tea room, etc., and the decorative materials of the wall and ground should also be consistent with the living room; The secondary balcony is generally adjacent to the kitchen or the living room and the room other than the master bedroom, mainly for storage, drying clothes or when visiting, and the decoration can be simpler.

2. Pay attention to the quality of packaging.

Balcony packaging quality is the key in balcony decoration. Pay attention to its wind resistance and install it firmly. It is necessary to seal well, otherwise ventilation is equal to no sealing.

The lower mouth of the window sash is easy to seep water, and it is generally reserved for 2 cm of gap under the window frame, which is filled with special sealant or cement. If there is a window sill, let it be sloped outward.

3. Pay attention to safety.

The balcony of most residences does not carry more than 400 kg per square meter, so it is important to be aware of its load bearing when decorating the balcony. Decoration and storage should not exceed its load, and try to minimize overly heavy furniture to avoid danger. There is a wall between the living room and the balcony, the door and window on the wall can be removed, the lower half of the window can not be removed, it is a "counterweight wall" in the building structure, which plays the role of supporting the balcony, if it is removed, it will seriously affect the safety of the balcony, and even cause the balcony to collapse.

Nowadays, many people close their balconies to make use of balcony space, which can save a lot of space. The extra space can be designed as a garden, study, small guest room, etc. Enclosed balconies can be used with a lot of materials.

Many people don't know what material to use to seal the balcony when faced with a variety of materials. So what materials are better to use to seal the balcony under different circumstances?

What materials are used to seal balconies? plastic windows.

Plastic steel windows are commonly used window-type virtual chain pins, because they are better than other materials in sound insulation, heat insulation, fire prevention, air tightness, waterproof, anti-corrosion, heat insulation and other properties, so they are widely used, but due to their large cross-section, the lighting performance will be slightly worse. For example, aluminum windows.

2. Frameless window.

Frameless windows have good lighting performance, can maximize the convection of indoor air, are very beautiful and lightweight, and are easy to fold, and easy to clean in daily life. However, compared with other materials, the sound and heat insulation performance is poor.

3. Aluminum alloy windows.

The thickness of the aluminum alloy mold for the closed balcony should be greater than mm. It is widely used in the South. It is suitable for this type of sliding window. Aluminum alloy has excellent fire resistance, aging resistance and decorative properties. However, it has poor thermal insulation.

4. Broken bridge aluminum alloy.

The addition of a basic insulation layer to the usual aluminum alloy makes it possible to manufacture broken bridge aluminum alloy. It has excellent performance in heat insulation, sound insulation, waterproof, air tightness, fire prevention, anti-corrosion, heat insulation, etc. It can be used for a long time, however, it is more expensive than ordinary materials.

5. Solid wood windows.

Solid wood designs can be created in a variety of shapes and can also be decorated with different colors. However, wood has poor aging and heat resistance, and is prone to corrosion. Therefore, we need to pay attention to maintenance in daily life.

What do you need to pay attention to when sealing the balcony 1, the area calls to grasp the primary and secondary functions, and clarify the functions.

In general, existing residential buildings have 1-2 balconies. Before decoration, the main balcony and the secondary balcony should be distinguished, and the function of each balcony should be clarified.

2. Pay attention to the quality of packaging.

The quality of balcony packaging is the key to balcony decoration. Pay attention to its wind resistance and install it firmly. Do a good job of sealing, otherwise ventilation equals no sealing. It is still necessary to decide what materials to use to seal the balcony according to the specific needs.

3. Pay attention to safety.

No matter what material is used to seal the balcony, the load cannot be exceeded when decorating and storing, and the overweight of the furniture should be minimized to avoid danger.

The above is a summary of what materials are used to seal the balcony, as well as the precautions for sealing the balcony. To sum up, we hope that this article will help you. We must be careful when choosing materials, try to choose some good brands, what materials can be used to seal the balcony can be chosen by ourselves, and do not cut the quality because of greed.

You can get it for free

The balcony is a public area, the balcony can be used to dry clothes, raise flowers, drink tea and chat with friends, the balcony is divided into indoor balcony and outdoor balcony, the indoor balcony is connected to our living room, the outdoor balcony is generally an open-air balcony, the wind and rain balcony is easily affected, so we usually choose to seal the outdoor balcony with materials, and the materials that seal the balcony have become what we need to understand. SoWhich material is good to seal the balcony?What are the precautions for sealing the balcony?

A mausoleum, which material to seal the balcony is good:

1. Which material is good to seal the balcony, for the high-rise balcony, we can use broken bridge aluminum, because the thermal insulation effect of the broken bridge is better than that of plastic steel, and the broken bridge aluminum material has good sound insulation and fire and corrosion resistance, and the insulation effect is good, and it is also very convenient to maintain.

2. Which material is good to seal the balcony, some people like the pastoral style of solid wood. Because the solid wood material can be made in the balcony when the balcony can be made of rich shapes, the solid wood material has a variety of colors to choose from, the decorative effect of the solid wood material is very good, but the wood aging ability is poor, and it is easy to be corroded after the sun and rain, so the wood seal balcony anti-corrosion is very important.

3. Which material is good to seal the balcony, the first material to seal the balcony is the plastic steel window, the heat insulation and sound insulation effect of the plastic steel window is good and has good weather resistance, that is, the color of the material is relatively single, giving people a feeling that it is not very fashionable.

4. Which material is good to seal the balcony, there are many kinds of ground materials for sealing the balcony, such as common tiles and floors, even if it is a cement floor, but when choosing, it is necessary to take into account the function and decoration style of the balcony.

2. What are the precautions for sealing the balcony:

1. Precautions for sealing the balcony, scaffolding can not be placed on the door and window frame, hanging heavy objects or wearing objects in the frame and fan to prevent the doors and windows from being deformed and damaged.

2. Precautions for sealing the balcony, the surface of the doors and windows needs to be lined with non-metallic soft materials during transportation, and a reliable and stable focus point should be selected to avoid abrasion on the surface of the doors and windows.

3. Precautions for sealing the balcony, we must use the method of reserving the hole when installing doors and windows, and it is strictly forbidden to use the method of installing the mouth or installing the mouth first, and it must be installed before the interior and exterior of the hole.

4. Precautions for sealing the balcony, doors and windows should be fixed with 4 nails or plastic expansion bolts when fixing the concrete wall, and the brick wall openings should be fixed with plastic expansion bolts, which can not be fixed at the brick joints and cannot be fixed with nails. For hollow bricks, the aerated cut wall should be pre-embedded with wooden bricks, iron plates, and concrete blocks. The fixed spacing shall not be greater than 600mm, and the end spacing shall not be greater than 180mm.

5. Precautions for sealing the balcony, we can not remove the protective film of doors and windows during the installation process and clean up the cement, mortar and other dirt on the surface of doors and windows in time, and cannot use hard materials to scrape the surface of doors and windows to protect the surface quality of doors and windows.

You have already read the content written, about which material to seal the balcony is good and the content of the precautions for sealing the balcony is introduced here, I hope that after reading this article, you can understand this.

When decorating a new house, the decoration of the balcony cannot be ignored. Generally speaking, many people will block the balcony, on the one hand, for the safety of their families, to provide protection for their families, on the other hand, to dry their clothes, so as not to be wet by rain, and they can also raise potted plants and flowers to enrich home life. So which is the best material to choose for sealing the balcony?

Let's take a look at the problem of sealing balcony materials.

Among the materials used to seal the balcony, aluminum alloy is one of them. First, aluminum alloy is a material that is more commonly used, and second, this material has high durability, is not easy to rust on the appearance, can be used for a long time, and is relatively strong, which is very suitable as a balcony sealing material.

Glass is also a material that can be used, glass can not only be used to seal the balcony, but also can be used to make windows, the finished product decorated with this material will look beautiful and generous, and the glass can be used to enjoy the scenery outside the window. However, this kind of glass is generally not a purebred glass, but a processed mixed glass, and its outer edge is wrapped with other materials, which will be relatively high on the **. However, this kind of glass can be used for a long time, not to mention whether it is rusty and other problems, and it is relatively high from the perspective of safety performance, so the choice of this material among owners is still relatively wide.

Many renovated homes generally use this material to seal the balcony.

Another material is tempered glass, this material and the other two above, the cost performance will be relatively high, whether it is the durability of its use, or the sturdiness is relatively good, ** on the upper level, the most important thing is that its safety performance is better, this aspect is more worthy of affirmation.

You can get it for free