How to use a security fire extinguisher The purpose of security fire extinguisher training

First of all, pull the insurance, at the connection of the press handle, there is a horizontal iron bar, one end is the ring buckle, a section of the fixed rope such as lead, buckle the ring buckle with your fingers, pull hard, it will be opened, remember, when pulling the insurance, do not grab the press handle, otherwise it will not be able to pull, generally, put it on the ground first, hold the upper end of the fire extinguisher, so that it is easy to pull out.

Secondly, spray on the root of the fire source, the security fire extinguisher is generally oxygenated to extinguish the fire, not sprayed at the fire point, no effect, and may accelerate the combustion because of the acceleration of the air flow, if the use of carbon dioxide fire extinguisher, then pay attention, can not be sprayed directly obliquely, it is best to spray downward, carbon dioxide fire extinguishing depends on the specific gravity, direct spray oblique spray, carbon dioxide is sprayed to other places, and it only works on the ground fire.

Again, the fire extinguisher should pay attention to maintenance, regularly, be sure to check regularly, now except for some special industries that require special fire extinguishers, dry powder fire extinguishers are generally used, because it can target many fire sources, the average family, no matter what it can cope with. But pay attention to the pressure gauge, if the pointer is red, then it is impotent, and the fart will not give you one, according to the instructions to change the powder and inflate.

Finally, when using it, it is pressed and sprayed until it can't spray anything, because the dry powder fire extinguisher sprays powder by air pressure, and multiple presses may lead to no pressure and a large amount of dry powder is not sprayed. It is also possible that the ignition point is extinguished but will rekindle, so spray it out and be safe without wasting it.

In addition, some of the dry powder fire extinguishers I have seen indicate that they should be shaken upside down, and some are not explained, so I don't know whether to shake or not, I have never done powder filling work, so I don't know if the dry powder is not sprayed if it is not shaken.

Finally, a word of advice, the fire starts within 3 minutes of the open flame is the best time to extinguish the fire, 3 to 5 minutes is the time for you to escape, 5 to 8 minutes is the time for the fire to spread, and more than 10 minutes except for the loss is none of your business. So, you have to know that the nearest fire extinguisher to you is, and the closest escape route to you is.

Also, modern people should know more about how to escape from high-rise fires.

A fire extinguisher is a fire extinguishing appliance that can spray out the filled fire extinguishing agent to extinguish the fire under its internal pressure and move it by manpower.

The task of the fire extinguisher is to extinguish the first disaster. A fire extinguisher of qualified quality, if used properly and extinguished in time, can extinguish all fires with huge losses in the state of eruption. Therefore, the role of the fire extinguisher is very important.

1) Classification of fire extinguishers.

There are many classification methods for fire extinguishers, and there are three commonly used ones, that is, according to the type of fire extinguishing agent filled; The way the fire extinguisher is pressurized, the weight of the fire extinguisher and the way it moves.

1 Divided by the type of fire extinguishing agent filled.

water-type fire extinguishers;

foam fire extinguishers;

SecurityFire extinguishersThe purpose of the training is to rush to the rescue as soon as the firefighters arrive in the event of a fire, so as not to cause more losses.

The training on the use of fire extinguishers requires practical exercises to help trainees master the skills of using fire extinguishers. There are conditions to point the real fire boy bend to extinguish, and there are no conditions to use virtual experience equipment to practice.

It is not easy to really do a good job in public fire safety training. However, as long as the lecturer himself has the proper knowledge and ability, and is carefully prepared, attentive and patiently tutored, then the knowledge and skills of fire protection imparted will definitely make the audience interested and use them when needed.

Precautions for using fire extinguishers:

1. When receiving or discovering a fire, quickly grab a fire extinguisher near the surrounding area and rush to the fire point.

2. On the way to the fire, shake the extinguisher while rushing to the road, and make all preparations before extinguishing the fire.

3. Go to the fire scene, quickly judge the fire situation, important fire points, and carry out firefighting.

4. Use the fire extinguisher, first open the insurance, hold the fire extinguisher straight with the left hand, hold the fire extinguisher out of the end, face the root of the fire, separate the feet, form a left attack style, the body is slightly bent forward, slightly closed, the eyes show the front, listen to the movement, turn the head back and forth around the situation, the right hand is shaking up and down at the same time, increase the compression of the fire extinguisher in the hand (handle), carry out rapid ignition, along the wind direction, until the fire is extinguished.

Summary. The purpose of security fire extinguisher training is to rush to the rescue before the firefighters arrive in the event of a fire, so as to avoid greater losses.

The purpose of security fire extinguisher training is to rush to the rescue before the firefighters arrive in the event of a fire, so as to avoid greater losses.

Fire extinguisher training requires practical exercises to help trainees master the skills of using fire extinguishers. If there are conditions, the real fire is extinguished, and the virtual experience is used to set up a drill. It is not easy to really do a good job in public fire safety training.

However, as long as the lecturer himself has the necessary knowledge and ability, and carefully prepares, lectures attentively and patiently tutors, then the knowledge and skills of fire protection imparted will definitely make the audience distracted and use them when needed.

In addition to learning fire protection knowledge and mastering fire extinguishing skills, security guards should also do a good job in fire safety publicity. As a professional security guard, we should use our own fire safety knowledge to educate and guide the employees of the service unit to pay attention to preventing fire hazards and leaks to ensure the safety of customers.

Steps for using the fire extinguisher:

1. Remove the spray gun and discharge the powder tube;

2. Hold the spray gun tightly with both hands and aim at the root of the edge of the flame return of the fire field mold;

3. Unplug the safety pin and open the fire extinguisher valve;

4. Pull the plate machine to extinguish the fire from near to far.