Why doesn t evergreen grow well? What is the growing environment of evergreen?

Because evergreen itself has relatively high requirements for the ecological environment, indoor planting cannot make evergreen get enough light and water.

This may be due to the lack of water and nutrients, to apply fertilizer to the soil in time, and to loosen the soil frequently, water every 2 or 3 days, put them in a cooler place, and soon they can grow very vigorously.

The growth conditions of evergreen itself are particularly high, to ensure that it has sufficient sunlight and suitable temperature, its leaves should be pruned frequently, and occasional fertilization is conducive to its healthy growth.

<> "Illumination: Creating a Semi-Shadowed Growth Environment for Evergreens." Soil:

Rich in humus and well-drained sand bread. Temperature: Give it a 15-25 growing environment, fertilize:

During the growing period, a fine liquid fertilizer or a total slow-release rate fertilizer should be applied once a month. Replace the pots: Change the pots once or twice a year.

After changing the pot, put it in a cool and ventilated place, pay attention to the high air humidity, the soil in the pot should not be too dry or too watery, evergreen growth is suitable for soil growth, has certain nutrients, is relatively thick, and has good drainage.

During the maintenance period, it is replaced every two years. The best time is in early spring or early fall, usually around April or October. The soil used should be free, fertile, and highly permeable, as this is a fleshy root system.

After replacing the basin, place it in a cold and ventilated place, pour enough water and recover. After three or four days, it can gradually see the light and switch to normal maintenance. The humidity of the air in Evergreen Gosta is high.

If the humidity is insufficient, the tip of the stem will burn out. Spraying can improve moisture. The peat and garden soil are mixed well, and then we can plant the green caddy so that the green caddie grows well.

Evergreen gostatic acid matrix, sufficient nutrients, good moisture permeability. It is sensitive to sunlight. When the sun is hot in the summer, it should have proper shade.

In the summer, it is recommended to water 1-2 days during the growing phase of cadmium and apply liquid fertilizer to caddies for 10-15 days. Cutting and dividing are commonly used for propagation. Light:

Sensitivity to sunlight. In summer, when the sun is blazing, you must be fully protected. If left unprotected, it can cause the surface of the leaves to turn yellow and the plant to wilt.

It is usually held in April-May in the spring. Cut small plants from the roots of the plant, place them in the shade to dry, and soak a small amount of plant ash in simple sand. Branches:

It is usually held in March-April. It is planted in a vase and placed in a place to avoid the shade, kept in a moist state, and can germinate in about 25 days under the condition of 25 -30 days.

The air is relatively humid, the sun is relatively abundant, and the soil is relatively loose and nutritious, such an environment can make the evergreen grow well.

The growing environment is very dry, and the plant is very drought tolerant, so you don't need to water it every day, but remember to weed.

The growth link is in a month and a half, the soil is humus soil and must have good drainage, the temperature is between 16 and 24, in the process of growth must choose some fertilizer with a relatively low concentration, and replace the pot twice a year.

They grow in some places where the soil is moist and the sun is not very sufficient, the humidity in the air is a little higher, and the soil has some humus in it, so that they will grow well.

Evergreen is a perennial evergreen plant with leaves lanceolate or inverted-lanceolate, 15-50 cm in length and cm in width, sharp at the top and narrow at the base, evergreen flowers are pale yellow and fruits are red. When maintaining evergreen, the temperature of the growing environment should be controlled between 20-30 degrees.

An introduction to the appearance of Evergreen1. Evergreen

Evergreen is a perennial evergreen plant, the leaves of the plant are rectangular, lanceolate or inverted-lanceolate, about 15-50 cm in length and about cm in width, the top of the leaf is sharp, and the base is slightly narrower. In May every year, the evergreen flowers will bloom, and in September, the plants will bear red fruits.

2. Control the temperature

Evergreen likes a warm growth environment, it should be placed in an environment where the temperature is between 20-30 degrees, when the temperature is lower than 15 degrees, you need to use heating equipment to raise the indoor temperature, and when the temperature is higher than 32 degrees, you need to spray water for Evergreen to cool down.

3. Propagation by cuttings

In the spring of each year, it can be propagated by cuttings for evergreens, and the cuttings should be inserted into the loose, fertile and well-drained granular soil, and then the plants should be watered every 3 days to keep the soil moist, and the plants will germinate after 2-3 weeks.

4. Disease prevention and control

The common disease of evergreen is leaf spot, when the plant suffers from the disease, there will be small yellow spots on the leaves in the early stage, and the small spots will become oval or irregular brown or brownish yellow patches after continuous diffusion.

Evergreen grows taller.

Natural evergreens can grow up to about 5 meters, and potted evergreens are generally about meters, and their height is affected by the growing conditions. It can grow to 4 to 5 meters in 10 years, rice in one year, and rice in two years for potted plants.

Evergreen grows too tall to handle.

1. Cuttings: The pruned evergreen needs to be re-pruned and retransplanted, so that the evergreen will be shorter, and the newly pruned evergreen is easy to grow taller. The main stem of billions of years old can be cut off and can also be re-germinated.

It will look good after trimming. The pruning time is probably between May and June. If the weather is hot, it is difficult to survive and germination is slower.

It is best to prune in the spring.

What to do if Wan Nianqing is too dense.

If it is two evergreen plants, they can be planted separately in different pots or in autumn. Moreover, the planting should be done with loose and breathable soil, and the water should not be too much. As long as the soil is kept moist, it will be wet when it is dry.

Evergreen grows too tall and pruned.

2. Pruning: Use scissors for pruning plants. Don don't cut them off with your hands or a knife.

The juice of evergreen contains toxins, which will be uncomfortable when pruning. When the 100 million evergreen trees sell or grow taller, just cut off the stems and leaves of the tall buds with scissors. In general, short, dense potted evergreens are more ornamental, and the long branches are cut as short as possible.

After hundreds of millions of green plants grow taller, the new shoots and buds at the top of the plant should be cut off as much as possible, and all the seedlings at the top of the plant should be cut off, basically with the pruning length as 2 3 of its own length.

1. Use scissors:

After pruning the evergreen, cut off all its diseased branches. Those branches with thin stems and yellow leaves should be cut off to make the plant more beautiful. Cutting off these branches and leaves is also smoother, which is more conducive to its growth.

Evergreen can grow up to five meters tall, its height is affected by the environment, it can grow to 4 meters to 5 meters in 10 years, if it is a potted plant, then it can grow to about meters in one year, and it can grow to about meters in two years. If the evergreen grows too tall, you can prune it or take cuttings to make it shorter and make it grow better, but you should pay attention to the poisonous juice of the evergreen, and it is best not to touch it when pruning.

Evergreen grows taller.

The naturally growing evergreen can grow to about 5 meters, the potted evergreen is generally about meters, its height is affected by the growing conditions, the evergreen can grow to 4 meters to 5 meters in 10 years, if it is potted, Qi Tuan can grow to about meters in one year, and can grow to about meters in two years.

Evergreen grows too tall to handle.

1. Cuttings:The pruned evergreen needs to be re-cut and re-transplanted, so that the evergreen will become shorter, and the newly pruned evergreen will easily grow taller.

2. Pruning:The main stem of the evergreen can be cut off, it can re-germinate, it will look beautiful after pruning, the pruning time is probably between May and June, if the weather is hot and then pruned, it will be difficult to survive, germination will be slower, it is best to prune in the spring.

What to do if Wan Nianqing is too dense.

If it is two evergreen plants, they can be divided into pots, which can be carried out in autumn, and the planting should be done with loose and breathable soil, and the water should not be too much.

Evergreen grows too tall and pruned.

1. Use scissors:Use scissors specifically for pruning plants, do not cut them off by hand or with a knife, the juice of evergreen contains toxins and can be very uncomfortable to touch when pruning**.

2. Cut short shoots:When the evergreen grows taller, just use scissors to cut the stems and leaves with the height of the buds, generally speaking, the short and dense potted evergreen is more ornamental, so the long branches should be cut as short as possible.

3. Cut the top seedlings:After the green plant grows taller, it is necessary to prune off the newly grown shoots and buds at the top of the plant as much as possible, and prune all the seedlings at the top of the plant, basically pruning the length of 2 3 of its own length.

4. Pruning sick and weak branches:After pruning the evergreen, all its sick branches should be cut off, and those branches with thin stems and yellowed leaves should be cut off, which can make the plant more beautiful, and it is more conducive to its growth after cutting off these branches and leaves.

Evergreen adaptability is very strong, and the vitality is tenacious, is a relatively good breeding plant, daily breeding only needs to give 6 8 hours of light time, the temperature is maintained between 5 30, the plant can be very good growth, in addition to the vigorous growth period every half a month to apply decomposed liquid fertilizer, can promote the growth of plants.

Evergreen is a common plant in life, with a high ornamental ability, so is it easy to raise, Evergreen is a relatively good plant, strong adaptability, and tenacious vitality, in the breeding process do not need to worry too much about the plant can grow well.

It is indispensable to breed evergreen light indoors, it is best to place it in a astigmatism environment, give 6 8 hours of light time, the plant absorbs enough light to facilitate the photosynthetic reaction, so that it will grow more vigorously, and the light time in winter can be about 5 hours.

Evergreen is not very demanding for temperature, as long as the temperature is maintained between 5 30, the growth of the plant will not be affected, if the temperature is maintained between 6 18, the growth of Evergreen will be more vigorous, every other year you need to replace the new soil for planting.

Breeding evergreen also needs to be placed in a well-ventilated environment, into the summer need to be placed in the semi-shade, in the vigorous growth can be applied every half a month to apply the decomposed liquid fertilizer, timely supplement nutrients, is conducive to the growth of evergreen.