How to make a bookshelf? 10. How to make a bookshelf?

Homemade simple bookshelf**1: If you can collect some wooden planks at home or around, you can make the above simple bookshelf, although it looks simple, but it is very practical, and it can also be placed separately, when we were in elementary school, we often like to put our books neatly in the desk, this simple bookshelf seems to give us such an aftertaste.

It's very comfortable, the most difficult thing to find this kind of bookshelf is the material, you can imitate the above bookcase style, and you can also make a square bookshelf with a simple board.

Homemade simple bookshelf**3: Look at the above homemade bookshelf**, it looks more comfortable, in fact, it is quite simple to manufacture, as long as a few simple nails, and then simply decorate, it becomes a bookshelf. Many people can make such bookshelves in their own homes.

Homemade simple bookshelf**4: The above bookshelves look better, mainly used to place some magazines, if you are a magazine lover, you can be at home first such a bookshelf, put a few books you want to read in the near future on it, both practical and beautiful.

Homemade simple bookshelf**5: This design in the cloud is very dreamy, and it is very suitable for designing such a bookshelf in the baby's room, which looks more comfortable, but if it is in the baby's room, a layer of glue is glued on the bookshelf.

The bookcase is one of the main pieces of furniture in the study room, that is, a cabinet specially used to store books, newspapers, magazines and other books, which you will love.

The bookshelves on how to do are as follows:

Partition bookshelves.

1. Prepare a plank, a few sticks of wood, a hand of electric drills, some screws, and it is best to prepare a chainsaw for cutting the wooden strips and wooden air opening boards, if the planks and strips have been cut to the required size and length, there is no need to use a chainsaw. Bucket pants.

2. Use three wooden strips to make a tripod, one plank needs to be matched with two tripods, and so on, you need to install a few wooden planks on the wall to make the corresponding number of tripods.

3. Determine the position of the plank, make a mark, fix the tripod on the wall, pay attention to the upper end of the tripod should be kept horizontal, and the tripod mainly plays the role of support.

4. Place the wooden board on the tripod and fix it with screws, so that the bookshelf is made.

Waste cardboard box bookshelves

1. First of all, the waste carton should be prepared, in addition, there is also a need for tape, utility knife, ruler, pencil, etc.

2. Set the size of the bookshelf, measure the size with a ruler on the carton, and mark it with a pencil.

3. Use a utility knife to cut the carton into the desired shape along the drawn mark.

4. Paste the edge of the cut carton with tape and fix the shape.

5. If you feel that the original color of the carton is not good-looking, you can use double-sided tape or glue to wrap a layer of white paper on the surface of the finished carton, and then paint your favorite color or draw your favorite pattern on the white paper.

Bookshelf classification

The bookshelves in the library can be divided into metal bookshelves and wooden bookshelves according to the material, and the metal bookshelves can be subdivided into single-column type, double-column type, laminated bookshelves, dense bookshelves and sliding bookshelves.

Wooden bookshelves

Wooden bookshelf materials include solid wood, boards, wood core boards, grain boards, etc., which are formed by processing groups, and are coated with paint or used to decorate the surface with materials, which are rich in soft texture. The common form of the library is the upright type, the base is inclined L-shaped bookshelves, which are convenient for readers to access books and have different types of specifications.

Single-column type

The so-called single-column bookshelf refers to the weight of the books on each section of the partition horizontally with a single-column metal on both sides, and the length of each bookshelf is 90cm, which can be used alone or continued to be arranged. Generally speaking, the height of its bookshelf is more than 200cm, and the top will be connected by tie rods for safety.

Double-column type

It refers to the two sides of the bookshelf, each with more than two pillars, to bear the load of the horizontal partition to transmit the book. However, in order to promote aesthetics, wooden panels are added to the sides and top of the metal double-pillar bookshelves.

How to do a simple bookshelf - the role of a simple bookshelf.

Simple bookshelves are bookshelves specially designed to increase the amount of collection, which is simple and convenient. Simple bookshelves are generally multi-layered, and the planks of the bookshelves are very strong, and the size and length are very appropriate. Its practical features are also very convincing.

The number of books placed in different simple bookshelves is different, and the books placed in the simple bookshelves with more space are larger, and the books with smaller space are placed less; Because of its simplicity and lightness, some simple bookshelves can be hung on the wall, and this kind of bookshelf does not take up space; There are also simple bookshelves that can be disassembled and assembled in any combination, which is also very convenient.

How to make a simple bookshelf - steps to make a simple bookshelf.

1. Prepare materials and tools. To make a simple bookshelf we need to prepare three wooden boards in advance, 2 to 3 pieces of cardboard of the same size (preferably plywood), 3 extra-long screws equipped with spirals, paint and varnish. In addition, two production tools are required, a vertical curium and a drilling machine.

2. Cut the shape of the plank. First of all, cut the shape, vertical and horizontal lines of the plank. The 3 vertical planks must be the same size.

The shelves can be placed at will. Large or small, the big one can put two thick classical classics and photo albums. These just need to be changed in length and width.

The trick is to cut beautiful curves. The planks on the horizontal plane are also basically straight, only cut into a curved shape 40 cm from the end.

3. Cutting and scribing. One of the most complex steps in the process of making a simple bookshelf is to precisely sawing out the notches that fit the horizontal and vertical shelves. Three notches are cut out of each transverse plate, one in the center and two at 20 cm from both ends.

The notch on the riser is cut according to your own needs, because it directly determines the size of the lattice space. Adjust the position of the incision according to the size of your book.

4. Install the paint. Now you can assemble all the planks and see if they fit together, and then take them apart and apply paint and varnish. Of course, if you have a bamboo on your chest, you can paint it directly. In this way, a perfect simple bookshelf is made.

How to make a simple bookshelf, I believe that friends have a certain understanding through the above introduction. In their spare time, parents can prepare materials and tools in advance, and accompany their children at home to make simple bookshelves, which can not only enhance the relationship with their children, but also give children more happiness. Make a simple bookshelf and let it accompany your child through the happiest childhood moments.

If you want to buy a bookshelf of the right size from the ready-made home building materials market, it will undoubtedly consume too much energy and cost.

So under normal circumstances, we can also make it ourselves, not only can adjust the size of the bookshelf according to the actual needs, but also can cultivate their own hands-on ability, today for you to introduce an example of the steps and precautions for making a simple bookshelf, you can choose some wooden boards or common cardboard for installation.

1. How to make a simple bookshelf.

Method 1. Corrugated paper is cut to the right size. Here the size of the 6 small frames is cut first, and the three large frames should be cut after the small frames are combined, which will be more accurate.

Wrap it in white PVC self-adhesive wallpaper. combined into a small frame. Make all the frames one after the other and put them together.

Make the top part of the frame. The wallpaper wrapped in the cow pattern is finally done.

Method two. Tools Raw materials: waste cartons, wallpaper knives, scotch tape.

Method Preparation materials: two waste cartons, scotch tape, wallpaper knife, decorative stickers (paper), pencils. (The carton should preferably be this flat shape).

Use a pencil to mark the part of the carton that you want to cut.

The wide side of the carton is facing outward, and a pencil is drawn in a straight line from the top left corner to the bottom right, with the end point on the right being about half the height of the entire carton. The other side of the carton is also drawn in a straight line.

Use a wallpaper knife to cut off the excess in a straight line. Glue the edges of the carton with tape to prevent it from breaking. In particular, the bottom of the carton must be cemented, and then take the scrap material that has been cut down and pad the bottom.

You can wrap it with decorative paper or stickers, which will be more beautiful. But now a lot of boxes are very beautifully designed, so there is no other packaging. It can hold a lot of books, which is environmentally friendly, economical and practical.

1. Materials: wooden boards, screwdrivers, screws.

2. The wooden board is made of two pieces with a width of 23cm and a height of 80cm. Four planks 60 cm long and 23 wide. Three pieces of the blind plate behind the pure size of the roll. The size of the holes in the planks can be laid as needed at the time of ordering.

3. Put the first short board and the long board together to correspond to the holes. Insert the screw into the corresponding large pie hole and tighten it with a screwdriver.

4. Put the shield into the back side and screw the corresponding screws into the hole with a screwdriver, and the second long plate can be spliced and screwed after completion.

How to make the bookshelf handmade simpleHow do you have a simple bookshelf? Let's make our own bookshelf.

1. Prepare the following materials: wooden boards, screwdrivers, screws.

2. Cut the plank.

Before making, the shape of the board is first cut. The vertical planks must be large and small, large or small, and the large ones can be used to hold heavy books, and these only need to be changed in length and width. The trick is to cut a beautiful arc out of your mouth.

The planks on the horizontal plane are also basically straight.

3. Sawing out the horizontal frame and vertical frame.

Precisely sawing out the notches that fit the cross frame and the vertical frame is one of the most complex steps in the whole process, with three notches cut out of each transverse plate, one in the center, and the notches on the riser are cut according to their own needs. Adjust the position of the incision according to the size of the book. Measure accurately, mark well, and then make an incision.

4. Assemble. Once the preparation is complete, all the planks can be assembled and then disassembled, painted and varnished. Once you've done all the painting work, assemble the planks where you want to place your bookshelves.

Except for the plank on the top of the bookshelf, there is no need to install it. Drill holes in the notches where the top frame is placed, insert screws, pass through the planks, and drill holes in the corresponding points on the wall for fixation. If you are concerned that there is not enough wood in the notch, you can drill holes in the planks above the notch.

The whole bookshelf is formed, and these small holes are not visible, which is very beautiful.