How can evergreen produce more new seedlings?

Evergreen has high requirements for breeding soil, and it is advisable to build a fertile, loose, well-drained and humus-rich sandy soil for bridge building. Because the newly bought Wan Nianqing has not yet adapted to the new environment, it is easy to hurt the roots of the soil change, and after adapting to the new environment, the soil will be changed.

The temperature must be well controlled, and the temperature around the newly bought evergreen is best controlled between 20 and 38 degrees, which is the most suitable temperature for its sensitive cracking, which can make it adapt to the new environment faster.

Don't rush to let the newly bought evergreen go to the sun and receive the light. It is a semi-shady plant, the need for light is not large, and the new environment is not adapted, direct contact with light is easy to be sunburned, need to first maintain the branches in a shaded and ventilated place for a period of time, and then slowly contact with light.

For this plant that has just been bought, the amount of watering must be controlled, usually after a watering, do not water again within three days, and then return to normal watering after it adapts to the new environment.

Plant evergreen seeds.

There are the following steps:

2.Prepare planting containers: Choose containers that are suitable for seed germination, such as planting pots, seedling trays, or seed trays. Ensure that the container has good drainage and can maintain a suitable humidity environment.

4.Sowing: Spread the seeds evenly on the prepared planting container. Depending on the size of the seeds, you can gently press the seeds, but don't bury them too deeply. If the seeds are small, they can be mixed with fine sand and sprinkled on the surface of the soil.

5.Keep it moist: Keep the soil moist by watering gently with a spray bottle or watering can. But don't overwater it so that it doesn't cause the seeds to rot. Cover the planting container to maintain the right humidity and provide a warm environment for the seeds.

6.Provide a suitable environment: Place the planting container in a warm, bright location, but avoid sun exposure. Keeping the ambient temperature between 20-25 degrees Celsius helps promote seed germination and growth.

7.Care and nurture: As the seeds begin to germinate, ensure proper ventilation and ventilation while the soil remains moist. When the seedlings reach a height of 5-10 cm for lead, transplanting them into a larger container can be considered.

8.Give proper light: Evergreen likes plenty of sunlight and can be placed outdoors or on a sunny windowsill. If you don't have enough sunlight, you can use an artificial light source, such as fluorescent or LED lights.

9.Fertilization: During seedling growth, organic fertilizers, such as liquid or solid fertilizers, can be applied in moderation to provide additional nutrients.

10.Regularly inspect and deal with pests and diseases: Regularly check the health status of evergreens, and pay attention to the prevention and control of pests and germs. If necessary, organic or chemical pesticides can be used for curing roll sensitization.

By following the above steps, you can grow healthy and lush evergreens and enjoy their beautiful green leaves. Remember, planting seeds requires patience and care, as well as proper maintenance conditions, and hopefully you will succeed in growing beautiful evergreen plants!

Evergreen is sensitive to temperature and should be planted when it is warm. It is generally planted in March and April in spring, when the temperature is around 20 degrees, which is conducive to budding.

Evergreen planting time.

1.Sowing: If you want to use the sowing method, start with the month.

It can be planted in a pot, watered, and placed in a cool place for the round core to germinate after a few days. This method of sowing takes a while from seed to growth, so most people choose the dividing method. 2.

Classification of plants: The division of evergreens should be carried out in early spring. Take it out, and you will find that there must be a lot of small shoots in the roots.

Plant these little shoots together with evergreens, and then plant these little plants in pots. After watering, it only takes ten days to grow evergreen roots.

Evergreen planting method.

1.Soil change: Evergreen has strict requirements for soil, and the fertile, loose, well-drained, humus-rich sandy soil is suitable.

The newly bought Wan Nianqing, because it has not yet adapted to the new environment, is easy to hurt the roots when changing the soil. Change the soil after adapting to the new environment. 2.

Temperature: For newly bought evergreens, it is best to control the surrounding temperature between 20-38 degrees to allow it to adapt to the environment as soon as possible and promote growth. 3.

Illumination: Newly bought evergreen should not be illuminated. It is a semi-shaded plant that does not require much light.

And they don't adapt to the new environment, so it's easy to get sunburned. Therefore, it needs to be kept in a cool place, and ventilated, and then bask in the sun after adaptation. 4.

Watering: For this newly bought plant, the amount of watering must be controlled. After watering, it is generally watered at an interval of 3-4 days.

After the evergreens adapt to their new environment, they will return to their normal watering amount.

How to plant the evergreen that I just bought.

1.Light: Evergreen likes warmth and is afraid of strong light.

It is suitable for curing under scattered light. If it's grown outdoors, shade it should be. 2.

Soil: Potted evergreen can be cultivated with ordinary garden soil, but it is best to use loose and slightly acidic sandy loam soil with good water permeability. 3.

Temperature: Evergreen likes warmth and has weak cold tolerance. In winter, it should be moved indoors for maintenance.

It is best to keep the temperature at 6-18 and not lower than 6. When the temperature drops below 10, it is necessary to take necessary insulation measures, otherwise it is easy to cause leaf litter and ulceration of the stem tip. 4.

Moisturize: Keep the potting soil moist in summer, but don't overwater it. Keep the soil moist and avoid standing water.

5.Fertilization: Evergreen plants are highly resistant to fertility.

Fertilization should be done thinly and frequently. Fertilization is applied once a month during the growing season, with an interval of 10 days in summer and stopped in winter. It is not advisable to water too much, because stagnant water can easily lead to root rot and old cavity of the plant, which affects the growth.

If the leaves of an evergreen tree turn yellow or wither in the winter, it is because there is too little water and the root system absorbs less water.

It can be divided into young branch cuttings and old branch cuttings.

Shoot cuttings are carried out during the rainy season in June and July; Old cuttings can be carried out in March-April of the following year.

Cuttings of young shoots should be cut from the current year's strong branches, a section of 15 cm should be cut from the top downward, the lower incision should be a section of the subnodal centimeter, and the lower incision should be cut off at the subnode centimeter. The incision should be smoothed, leaving the parietal lobe and removing the lower lobe. Cuttings can be made in a slotting bed if there are greenhouse conditions, and cuttings can be made in pots for raising flowers at home.

The medium can be mixed with vermiculite and perlite (1:1), or mixed with garden soil and chaff ash and an appropriate amount of fine river sand.

The depth of cuttings is generally about 1 3 of the length of the cuttings. Slightly compact the base with your fingers so that the base of the cuttings is in close contact with the medium. After cuttings, spray enough water with a fine watering can, and then put it in a cool place, and then need to be kept moist frequently, with a relative humidity of about 80, at a temperature of 20 -25, and it can be rooted after 20-30 days.

Old branch cuttings can be carried out in 3-4 months, can be used every other year to grow thick branches, cut into a section about 15 cm long, the lower end of the cut should be cut off at the centimeter under the node, a section with a top leaf and the following stem segments can be used as cuttings, the lower part of the cuttings should be removed from the leaves, the cutting method is the same as the young branch cuttings, after watering enough, placed in a cool place, and often kept moist, about 1 month can take root one after another.

You can also cut 15 cm of the apical stem, leave 3 5 leaves at the top, insert them directly into the water, change the water after 2 days, and also take root from the node. When cutting cuttings, do not let the juice fall into the eyes or into the mouth by mistake, so as to avoid poisoning and injury. Water plugs are also easy to root.

It can be combined with the annual spring repotting, when the plant is knocked out of the pot and cut from the base to divide into several parts. The incision must be smooth, coated with plant ash or charcoal powder, and then potted. The first watering after dividing should be thorough and placed in a cool place, and it should be kept moist often in the future, but not too wet.

The transplanted bushes can grow into flowering plants in the same year with careful management.