The purple clay pot should be well maintained, so how should the purple clay pot be cleaned?

The best way is to wipe it with a coarse and stiff cotton cloth and use a nylon brush when washing. Don't push too hard so as not to accidentally poke the teapot. Brew the teapot carefully, have the correct gesture when pouring tea, and it is best to gently press the edge of the lid with your index finger.

You can wash it with clean water, pour out the tea leaves inside, or you can apply toothpaste on the outside and let it sit for a minute before washing, which will be cleaner.

It can be boiled in a teapot at high heat, then washed with running water and wiped clean with a rag.

1. The method of cleaning the purple sand pot is because the purple sand pot will have dust particles and sand particles or other impurities in the production process, after cleaning it with clean water, then put the purple sand pot into cold water, and then heat it over low heat, and boil it for about 20 minutes, you can remove the soil taste in the purple sand pot, and it can also play a smoother role in the pores.

2. Do not smoke oil. It is necessary to avoid places with oil smoke, otherwise the purple clay pot will only be contaminated with oil smoke, clog the pores in the purple clay pot, so that the tea fragrance cannot be fully volatilized, and it will seriously affect the later maintenance of the purple clay pot.

3. Remember to be clean. After using up the purple sand pot, you can do a good job of cleaning it immediately, and keep the cleanliness and dryness of the purple sand pot to better prevent the oxidation of the purple sand pot, and make the gloss of the purple sand pot better and better, and really maintain the purple sand pot.

4. Remember to rest. Use the purple sand pot to make tea, and the maintenance of the purple sand pot can be said to complement each other, because the nutrition of the tea can moisturize the purple sand pot, but you can't use the purple sand pot too often to make tea, once a day, or once every two days to make tea with the purple sand pot, so that the purple sand pot has time to rest, and it is also one of the ways to maintain the purple sand pot correctly.

5. Using a purple clay pot to make tea, can indeed add a rich taste of tea water and tea flavor, if you also like to use a purple sand pot to make tea, you must pay attention to the cleaning and maintenance of the purple sand pot, so that you can raise a purple sand pot to accompany you for a longer time.

1. Rinse several times with boiling water before use;

2. When making tea, it is best to wipe the body of the purple clay pot with a cotton rag;

3. After use, immediately clean the tea residue in the teapot, rinse it with cold water, and then put it in a ventilated place to dry. You can't use detergent and other washing products to clean the purple clay pot, and you should also pay attention to letting the pot rest when brewing tea.

How to clean the purple clay pot.

One is to soak the teapot in a large container with warm water, and the water does not fill the body.

Second, after soaking the teapot for 24 hours, use a scouring pad or foam cotton used in the kitchen to manually clean it, wipe off the dirt inside and out, and then rinse it with clean water.

Third, after the above process is completed, if you still feel that it is not clean enough, you can squeeze it on the toothbrush with toothpaste and apply it to the body of the pot, wait for 10 minutes and then brush it again, and then wash it.

Fourth, there are some flowers, the shape of the body of the pot is more complicated, and the details are not easy to deal with when cleaning, so you can choose a toothbrush or sewing needle to clean the teeth.

Fifth, use hot water to scald the pot inside and out several times to remove the smell of cleaning, and an old purple clay pot will look new.

The maintenance principle of the purple clay pot:

First, the principle of thoroughly washing the inside and outside of the kettle. Whether it is a new pot or an old pot, the wax, oil, dirt, and tea dirt on the body of the pot should be removed before raising the pot.

Second, you can use tea juice to moisten and moisturize the pot table. The more times the tea is brewed, the more tea juice the pot absorbs, and the soil tire absorbs to a certain extent, and it will penetrate the surface of the pot to emit a moist and jade-like light.

Third, the principle of cleaning and drying after use. After making tea, the tea residue should be cleaned and rinsed with clean water to avoid peculiar smells.

Fourth, the principle of moderate brushing. After the tea juice is poured on the surface of the pot, it can be lightly brushed with a small soft-bristled brush; Accumulate tea in the pot, rinse it with boiling water, and then wipe it with a clean tea towel slightly, and do not brush it vigorously.

Fifth, do not contact the principle of oil pollution. The purple clay pot is the most oil-stained, and it must be cleaned immediately once it is stained with oil, otherwise the soil tire will leave traces after absorbing the oil.

Maintenance method of purple clay pot:

1) After use, the purple clay pot must be kept dry and dry, and do not accumulate moisture.

2) Do not put near places with a lot of fumes or dust.

3) Do not soak the purple clay pot with dish soap or any chemicals, otherwise it will wash off the tea flavor and tarnish the appearance.

4) It is best to put the lid on the side after use, and do not always make the lid tight.

5) Do not soak the pot in water often, and only flush it when you want to make tea.

6) It is best to prepare a few good purple clay pots, only use a designated pot when drinking a certain kind of tea, and use a unified teapot for any tea leaves, which should be identified to avoid confusion.

7) Put the air in a smooth place, should not be placed in a stuffy place, let alone considered precious, after using the package or seal.

8) After each use, use a cloth to absorb the water outside the pot, then pour out two-thirds of the tea leaves in the pot, leaving about one-third, flush into the boiling water, two or three times, keep the washed water, and then clean up.

<>1. The first time you use the purple clay pot tea set, you should separate the pot from the lid and place it in a clean container filled with water, the container should be large enough, and the water should cover the whole pot. Put some tea leaves in the container at the same time (the tea leaves you want to use this pot to brew), put them on low heat and boil slowly, and take care of them to prevent the pot from hitting each other with the lid or the wall of the container and causing damage.

2. Slowly boil for about 1 hour, remove the fire source, let the pot still stand in a container covered with water, cool slowly, and leave for 1 day. The next day, take out the pot, pour out the sediment left in the pot, and carefully pour water over the pot to wash. The next day, take out the pot and carefully rinse it with hot water.

After this treatment, the air holes in the pot are all open and ready for use.

1. Brush with tea soup, you can take the pen of the pot and dip it in a little brush, and gently brush it on the inside or outside of the purple sand pot, so that the body of the purple sand pot can fully absorb the tea soup, so that the color of the purple sand pot will become more and more uniform, and a beautiful luster will appear after a long time.

2. For the newly bought paper sand pot, the first step is to do the cleaning work, because there will be a lot of fine sand inside the new pot, which needs to be cleaned before it can be used, and some teapots will be coated with a layer of wax on the outside of the pot in order to make it look better.

1. Generally speaking, the cleaning of Zisha pot is divided into new pot cleaning and old pot cleaning. If it is a new pot made of pure purple sand, it can be washed several times with boiling water before starting to use, and there is no need to use other methods to open the pot, but sometimes it is inevitable to encounter the situation that the pot body is waxed and oiled, which requires careful cleaning up of the pot before use, otherwise it may not affect the use. Take a clean and odorless pot, place the lid and body of the pot separately at the bottom of the pot, pour water higher than the body of the pot, and slowly heat it over a simmer until it boils.

In this step, it should be noted that the body of the pot and the water should be heated simultaneously, and the body of the pot should not be suddenly placed in boiling water as some experts say, so as some experts say, to have a sudden change of heat and cold.

2. After the water boils, take a handful of tea leaves (usually use heavy roasted tea leaves that are more resistant to boiling) and put them into boiling, and after a few minutes, remove the tea residues, and continue to simmer the clay pot and tea soup over low heat. Treat.

After 20 or 30 minutes, carefully remove the teapot with bamboo chopsticks and let it stand to cool down (hurriedly pour cold water). Finally, rinse the inside and outside of the pot with clean water to remove the residual tea residue, and it can be officially activated.

3. The main function of this boiling method is to remove the wax awakening pot, but also to make the pore structure of the pot body, through thermal expansion and cold contraction and release the earthy flavor and impurities contained in it, if implemented properly, it will help to make tea and raise the pot in the future. If you have a second-hand pot, an old pot, an old pot, or an unearthed pot, you need to be more cautious in handling it, because no one knows who the previous owner of the pot was.

4. Not only the unearthed pot needs to be clear, but also the old pot and the old pot, because many people do not use a teacup to drink tea, and they are directly to the spout, and some people are used to using the teapot to contain soy sauce and sesame oil, and even some fake pots are used to dyeing the purple sand pot with ink, shoe polish and hydrochloric acid. Therefore, no matter what source you get from the old pot, you have to clean it well, give it a makeover, and soak it from scratch. Because a good pot is not a second tea, if the pot that often brews Pu'er is suddenly changed to oolong, the tea soup will inevitably be impure, and the tea flavor will be mixed.

5. The cleaning of the old purple sand pot usually does not take the boiling method, because the old pot may contain cracks and repaired dark wounds, and it is not suitable to use this "fierce medicine". The usual practice is to take a clean pot and basin first, put the old pot that has been warmed in, inject hot water to submerge it over the body of the pot, and then mix it with about 10ml of bleach, so let it stand for an hour and then take it out (if you feel still uneasy, you can extend the time), and then brush it repeatedly with a brush to brush the inside and outside of the pot, and then you can reproduce the true face of Lushan. It should be noted that bleach has a slight corrosive effect on the human body, and its penetrating power is very strong, so it needs to be fully washed before making tea.