How to DIY make a cat teasing stick? How to make a homemade cat teasing stick

Updated on pet 2024-07-18
5 answers
  1. Anonymous users2024-02-12

    I think I need to use a stick on the glue. A rope is threaded with several feathers.

  2. Anonymous users2024-02-11

    <> pet cats Parents who have cats must know what the cat stick is, and the cat stick is still more popular for cats, as long as you are willing to play with it, the cat is tireless if you want to play for an hour or two. But the cat teasing stick is facing another problem, it is easy to be damaged by the cat scratch and bite, and at this time, if you can make a beautiful cat teasing stick is perfect, in fact, the process is very simple, today I will take you to learn it!

    Methods and steps for making cat teasing sticks:

    Step 1to prepare the ingredients needed to make a cat teasing stick. Long lollipop sticks (other similar sticks and poles are also acceptable), some feathers (such as those on a feather duster), double-sided tape, needlework, tweezers, and decorative beads (1-2 pieces that can be threaded are fine).

    Step 2For the sake of aesthetics, the beads need to be threaded first. Insert the needle into the lollipop rod and leave a section for threading the beads. Note that there should be a little space between the two beads, as it will be useful later.

    Each bead should be secured with super glue first.

    Step 3, those feathers that have been prepared, first seal some with a small step. Simply sew it with a small square cloth, and this small step should be just enough to cover the first bead you just wore. After sewing, it is best to use a thread to string the four sections of the small square cloth and flow out a long thread.

    Step 4, wrap the sewn feather cloth around a bead worn at the outer end, and then pull the stringed thread so that the feather wraps the bead well. Then wrap the wrapped part tightly a few times, tie the knot and seal the needle, and then arrange the feathers.

    Follow the steps above and you're done with a beautiful, fluffy teaser.

  3. Anonymous users2024-02-10

    To make a cat teasing stick, you can use a stick (such as a wooden or plastic one) to attach feathers, beads and other trinkets to the stick.

    First of all, you need to prepare some materials that may be used. For example, a wooden stick that is not easy to break, or you can look for a thin stick with elasticity and toughness (the material can be plastic). Then prepare some feathers (chicken feathers, duck feathers are fine), and prepare a needle and some thread.

    Secondly, it is necessary to use a needle to sew the selected feathers. When sewing feathers, be sure to tighten them and sew them with thread. The chicken feathers should be sewn layer by layer, and each layer should be sewn tightly, and the whole feather should be sewn like a blooming flower after sewing.

    Finally, I will talk about the sewn feathers wrapped around a section of the wooden stick, pay attention to the tightness when winding, and finally tie the stitch to death after sewing, so that a cat teasing stick was born. It's a very simple cat teaser, but it doesn't affect at all when you use it.

    Cat teaser:

    The cat teasing stick is a toy that cats love. Cats have a great interest in fast-moving objects, and the cat teasing stick can quickly attract the cat's attention and make it excited to bite, so it has become one of the essential toys for cat families.

    There are a variety of materials at the front end of the cat teasing stick, generally with feathers, rabbit hair or artificial materials, for cats to bite with their claws, and the most popular material for cats is made of real fur. The body of the stick is generally made of plastic, which provides enough elasticity to allow the front end to move quickly and attract the cat's attention. Other materials can also be seen on the market, such as the cat teasing stick made of wooden sticks, but it is not popular.

    When buying a cat teasing stick, you should pay attention to whether the front end is firmly connected with the stick body and whether it can withstand several cat bites; Whether the front end material is clean and whether it can be held in the mouth of the cat; whether the rod body is strong; At the same time, the cat's preference should be considered to determine the material of the front end.

  4. Anonymous users2024-02-09

    The tutorial for making a cat teaser stick is as follows:

    The ingredients needed to make a cat teasing stick: a long lollipop stick, a hairball from a discarded hairball scarf, a long pin (or a decorative needle for stringing beads), two beads, double-sided tape (hot melt glue), tweezers (or vice), needle and thread.

    String the beads on the pin, the beads on the top are the core of the cat teasing stick, it doesn't have to be very beautiful, the beads below should be exposed, and you need to use a more beautiful one.

    If the mouth of the pin and lollipop does not fit, there are three ways to trim the pin.

    1. The first method is to use tweezers or vise to make some bends on the pin.

    2. Method 2: Wrap a layer of double-sided tape on the pin.

    3. The third method is to use hot melt adhesive, which has the best fixing effect and is recommended.

    Attach the pin to the rod of the lollipop, taking care to leave a certain space between the two beads. The fur of some cat teasing sticks is removed from discarded furball scarves, or it can be replaced by a hairy head flower or mobile phone chain to remove the fur. String the 4 edges of the fur with a thread, just string it without sewing it to death, and wrap the last stitch around the thread of the first stitch.

    You can use white beads as a core, and then wrap the white beads with fur.

    As mentioned earlier, the four sides of the fur are strung together and not sewn, so as long as the thread is tightened, the fur can wrap the beads.

    If the fur is uneven and exposed, you should sew it in and wrap it inside, because it will not look neat and unsightly. Pay attention to the sewing of the edge, it is best not to prick a lot of eyes on the leather, and try to sew on the previous sewing thread.

    When sealing the needle, try to seal it on the original stitch, and try to avoid rotting and piercing the eyes on the fur of the fur, so as not to cause the fur to break off when the cat is playing. Wrap a few more circles of wire around Wang Yan tightly, seal the needle, and pay attention to be sure to hide the excess corners. Tidy up the fur and the cat teaser is done.

  5. Anonymous users2024-02-08

    Here's how to make a cat teaser:

    1. The materials needed to make a cat teasing stick: a long lollipop stick, a hairball with a discarded hairball scarf, a long needle (or a decorative needle for beading), two beads, double-sided tape (hot melt glue), tweezers (or vice), needle and thread.

    2. String the beads on the pins. The beads at the top are used as the core of the cat teasing stick. They don't need to be pretty. The beads at the bottom should be exposed.

    3. If the pin and lollipop spout don't fit, trim the pin. There are three ways to do this. The first method is to make some bends on the needle with tweezers or pliers.

    Method: Wrap a layer of double-sided tape around the pin. The third method is to use hot melt adhesive, which has the best fixing effect and is recommended.

    4. Fix the pin on the rod of the lollipop, and pay attention to leave a certain gap between the two beads.

    5. The hair of the cat teaser is removed from the discarded wool scarf, or it can be replaced with a hairy headgear or mobile phone chain to remove the hair.

    6. String the four edges of the fur with thread, just string them together, don't sew them to death. The last stitch is wound around the thread of the first stitch.

    7. The white beads on the top serve as the core, and the white beads are covered with fur.

    8. As I said earlier, the four sides of the fur are strung together, not sewn together, so as long as the thread is tightened, the fur can wrap the beads.

    9. The uneven fur exposed on the outside should be sewn into it and wrapped inside, and it will look untidy when exposed. When sewing edging, it is better not to prick a lot of eyes on the leather, but to sew on the lines that were previously sewn.

    10. When sealing the needle, try to seal it on the original pin, and try to make fewer holes in the hair, so as not to cause hair breakage when the cat plays.

    11. Wrap the thread several times, and then seal the needle. Be careful to hide all the extra corners.

    12. Clean up the fur and tease the cat stick and it's over.

Related questions
6 answers2024-07-18

It's very easy to make me happy, just don't make me angry, remember, you just don't make me angry. Satisfied.

9 answers2024-07-18

Chill the coarse rice noodles with ice water, prepare some garlic and ginger puree, fry a chili oil, the chili oil needs to use tofu milk, which will be more fragrant, and then fry a little peanuts, put the rice noodles and mix well.

7 answers2024-07-18

The inheritance craftsmen in the countryside make large "bird cages" by hand, and the craftsmanship is a must.

21 answers2024-07-18

Take out the yolk part of 2 eggs, add 90g caster sugar and stir, add 140ml of milk, stir evenly and put it in the pot, turn off the heat after boiling, refrigerate for 30 minutes, whip the whipping cream, add vanilla extract, egg milk liquid and stir, pour into the container, add some fruit, and freeze.

4 answers2024-07-18

Soaking, cooking, bottling, sterilizing, inoculating, incubating.