What is the order of sweeping correctly, and what are the points and processes of sweeping?

The correct way to sweep the floor is to start from the inside to the outside, and from the corner to the open area.

Take the sweeping tools, start sweeping from the side, bend down, put the garbage in the garbage shovel, and empty it in the trash can.

Inside to the outside, sweep the garbage inside to the outside, just after sweeping.

1. Preparation of materialsBrooms and dustpans (try to be as child-friendly as possible).

2. Environmental preparation1. Cleaning range: choose a range for living room, room, kitchen, balcony, etc.

3. Cleaning time: determined by the cleaning range.

Start by sweeping the garbage into a pile from the outside to the inside and sweep the garbage into the dustpan.

1) Hold the broom: with your left hand on top and your right hand on the bottom, hold the handle of the broom with both hands and bend your body forward a little.

3) Sweep into a pile: Gently sweep the garbage around you together and sweep it into a pile.

4) Collect garbage: Hold a dustpan in your left hand and a broom in your right hand to put the garbage into the dustpan.

1. When cleaning, adjust the position of the child holding the broom in time; When sweeping the floor, pay attention to remove other things before sweeping it clean.

2. You can set a middle point and let the child have a goal to sweep into a pile.

The public security law and some special units have requirements, such as the National Security Bureau, or the political departments of some units, will be very strict, and the immediate family members (spouse, parents, children) must not have a criminal record, otherwise they will not be hired. The political review process is as follows:

1. Organizational preparation.

The relevant personnel department, together with the employer, will form an assessment team according to the assessment task, study and formulate the assessment implementation plan, implement the staff, and organize a number of assessment teams. The assessment team must be composed of more than two members and must undergo the necessary training.

2. Investigation. Each assessment team went to the relevant units to inspect the assessee. Inspections are generally carried out in the form of consulting archives, listening to briefings by leaders or organizations of the unit, individual conversations, and holding symposiums. According to the inspection situation, the assessment team conducts evaluation in accordance with the assessment standards, and writes the inspection report and puts forward the inspection results.

The inspection report is required to comprehensively and objectively reflect the situation of the assessee, and attach necessary supporting materials. The supporting materials are required to be signed by the certifier or stamped with the official seal of the relevant unit.

3. Audit. The assessment team reviews the inspection report and the assessment results put forward by the assessment team, determines the assessment results after collective research, and the employer is responsible for notifying the assessee himself, and serves as an important basis for deciding whether to hire or not.

The ultimate goal of sweeping the floor is to sweep the floor, mainly dead corners and the like, which are not easy to touch, such as under the sofa or the corner of the table.

The main point of sweeping the floor is to be clean, the process is not important, the important thing is the result.

Practice more, look at others more, and slowly come back to yourself.

The order of cleaning should be from top to bottom, from the inside to the inside.

Step 1: Clean the ceiling and windows.

Because cleaning ceilings and windows may cause dust to fall, it is better to do it first.

The second step is to clean the glass.

Clean the glass with a double-sided glass scraper, which is clean and convenient.

Step 3: Clean the kitchen.

In order not to interfere with the preparation of lunch, you can clean the kitchen first.

Step 4: Clean the room.

Pay attention to hygienic dead corners, such as the top of the wardrobe and the top of the door frame.

Step 5: Clean the living room.

Because the living room is often moved around, it is best to sweep and mop the floor at this time.

Step 6: Clean the bathroom.

Because the bathroom is the place where the cleaning utensils are washed, it is left to be cleaned at the end.

The steps are as follows:

Step 1: Clean the ceiling and windows. Because cleaning ceilings and windows may cause dust to fall, it is better to do it first. First, use a bamboo pole to support the chicken feather sweep to clean the ceiling; Then remove the screen window and put it in the bathroom for cleaning, generally with a shoe brush, dish soap or laundry detergent and water, you can clean it, and then dry it and put it aside.

The second step is to clean the glass. Clean the glass with a double-sided glass scraper, which is clean and convenient. The brushes for professional glass cleaning are generally one inside and one outside, like magnets.

After scraping the glass with dish soap (broken glass cannot be used), check that the safety rope is fastened, and then tie it to the non-operating hand before operating the cleaner. Ensure that the cleaner is free of adsorbed impurities, and if there is cement and other stagnant substances on the glass, please remove it before use. Care should be taken to clean the cleaner after the first wipe to facilitate the second wipe.

Generally scraped from top to bottom. The corners can be cleaned with a lint-free washcloth. After the glass is cleaned, the screen is reinstalled.

Step 3: Clean the kitchen. In order not to interfere with the preparation of lunch, you can clean the kitchen first. The first thing to do is to clean the walls, mix the detergent with warm water, add the same amount of detergent or dish soap, and put more if the kitchen is dirty.

After stirring well, clean the greasy tile walls directly. Generally, the walls can be wiped with a towel dipped in detergent. The second is to clean the cooktop, wash it with another towel dipped in detergent, and then go through the water again, so that there will be no greasy feeling.

Range hoods, etc., can be disassembled and washed by professionals.

Step 4: Clean the room. Pay attention to hygienic dead corners, such as the top of the wardrobe and the top of the door frame.

Step 5: Clean the living room. Because the living room is often moved around, it is best to sweep and mop the floor at this time.

Step 6: Clean the bathroom. Because the bathroom is the place where the cleaning utensils are washed, it is left to be cleaned at the end.

You can sweep as much as you want. You just have to remember one goal, which is to get the things in front of you clean, so in any order, then you will succeed in the end. If you are very concerned about the speed of work, then I can tell you that you can mop the floor first if you want to, sweep the floor first if you want to, wipe the table first if you want to, wipe the table first if you want to, and do whatever you want first.

The floor should not be rubbed with alcohol or thinner materials as much as possible to avoid tarnishing, and the floor tiles or laminate floors can be properly removed with hard objects; The wall can be cleaned with a feather duster or vacuum cleaner, and especially dirty places can be gently wiped with a white cotton cloth dipped in water; It is forbidden to wipe the baseboard and door paint finish with thinner, and it is forbidden to use hard objects without paint; If the glass is frosted or varnish, avoid alcohol, thinners. Order: from top to bottom.

Mop the floor first, and then mop the floor tiles or composite floors can be properly removed with hard objects; The wall surface should be cleaned with a feather duster or vacuum cleaner, and the dirty area can be gently wiped with a white cotton cloth dipped in water; From top to bottom clean your home, and everything is ok.

I was cleaning upstairs and downstairs in the elementary school students' make-up class, what should I do first.

The following are the steps for general indoor floor sweeping:1Clean up clutter.

Before you start sweeping the floor, clean up the debris on the ground, such as blankets, garbage, etc. 2.Prepare the tools.

Generally, a combination of a broom and a dustpan is used to complete the cleaning of the indoor floor. 3.Sweeping.

Place the broom on the ground to be swept and sweep the floor from far and near, from left to right, and sweep the dust, debris, hair and other objects on the ground around the ground. 4.Collect dust.

Gather the dust and debris on the ground and collect the dust and debris with a dustpan. 5.Dispose of cleaning bags or trash cans.

Put the collected dust, spine key debris and other items into cleaning bags and garbage cans, and dispose of them after sorting if there is a need for garbage sorting. 6.Cleanup tool.

Wash used brooms and dustpans for next use. It should be noted that the specific steps of sweeping may vary depending on the tools used, floor materials, cleaning frequency, and other factors. When performing sweeping work, use appropriate tools and follow cleaning habits to minimize the spread of dust.

Hello Dear Kiss Your questions, here are the following answers for you: 1. Choose the right broom. The broom seedlings for sweeping the tile floor are better than those of pig bristles, and they are available on the market.

The bristles are selected to be denser, and other parts of metal and plastic can be used. 2. Adjust the sweeping method. When sweeping the floor, the action should be steady and even, the pressure of the broom on the ground should be balanced, and it should not be just one direction, especially when sweeping to the brick joint, the lead should be swept along with the brick joint.

3. Use a plastic sponge mop. When using, pull back individually, change one side to the other when it is dirty, and then use a container of water to scoop water in the bathroom and flush it along the sponge, wash off the surface swag and then wash it. The dirt on the ground needs to be wiped back and forth before being pulled back individually.

4. Deal with the ground. There should be a gap of more than two millimeters between the floor tiles and the bricks, which can not only prevent the ground bulge caused by thermal expansion and cold contraction, but also can deal with the gap perfectly. When laying tiles, when the sand ash is not dry, use a needle cone to remove the sand ash in the gap, and then fill the caulk with white cement, so that the filled white cement can be firm.

The gap of the tile is small, it is not easy to deal with, and after a long time, the sand and ash in the crack slowly comes out, and the gap is deep, and it is easy to retain dust. If it is a loss, you can use a marble machine to take the seam away and re-use the white cement to hook the joint, and the ground will be easy to sweep in the future.

The order of cleaning should be from the top to the bottom, from the inside to the inside.

Step 1: Clean the ceiling and windows.

Because cleaning ceilings and windows may cause dust to fall, it is better to do it first.

The second step is to clean the glass.

Clean the glass with a double-sided glass scraper, which is clean and convenient.

Step 3: Clean the kitchen.

In order not to interfere with the preparation of lunch, you can clean the kitchen first.

Step 4: Clean the room.

Pay attention to the sanitary dead corners, such as the top of the vertical cabinet and the top of the door frame.

Step 5: Clean the living room.

Because Qiaoyou often walks around in the living room, it is best to clean and mop the floor at this time.

Step 6: Clean the bathroom.

Because the bathroom is the place where the cleaning utensils are washed, it is left to be cleaned at the end.

1. Before mopping the floor, we must first use the vacuum to suck the ground again, that is to say, the dust and impurities on the floor are thoroughly sucked clean, after vacuuming, the efficiency of mopping the floor will be improved, even if there is no garbage on the floor, it will be carefully vacuumed, and the mopping will be made faster after vacuuming.

2. Wet the mop after vacuuming, that is to say, let the mop retain a lot of moisture, which can dissolve the dust impurities remaining on the floor.

3. After all the substances are dissolved, you can take the mop to clean, and let the water on the mop be dried, and the mop will become dry after spinning.

4. Mop the floor dry with a dry mop, repeat about 3 times to absorb the residual sewage on the surface of the floor.