Is it better to choose a branded wardrobe with particleboard or MDF, or woodworking board for woodwo

1.In terms of materials, MDF uses sawdust from the late forest industry, and the material itself has no fiber structure at all. The laminated sawdust used in particleboard retains the fibrous structure and is made from mechanically specially processed useless branches.

Where applicable. Due to its uniform internal structure, MDF is widely used in the furniture industry, replacing wood markings for carving, furniture door panels, hat decorations, etc. However, particleboard is widely used in custom wardrobes for home décor because it is less prone to deformation and bulkiness, has good nail retention, and has a low formaldehyde content.

2.Finally, let's talk about blockboards. The planks are not easily deformed and are also very good at regulating indoor temperature and humidity.

Moreover, the texture and feel of the wooden board are very natural, and the stability of the wooden board is also very good, and it is easy to deform. The strength is also very good, it is hard, blockboard is much better than particleboard MDF, and he has almost no defects. There is only one drawback, which is that it is too expensive.

If you want to do it, you can do it on your own terms. Hope it helps. Combine your décor style with overall considerations:

Cabinets and door panels are generally made of particle board, and peritoneal door panels, acrylic door panels and solid wood door panels can be selected according to the style;

3.It is advisable not to use a carpenter's wardrobe; The carpentry wardrobe is better closed on site: but the section edge sealing is not good and cannot be compared with machining; And the wardrobe made by the carpenter, the profile is not sealed, and some substances in the board will be released from the profile, which is not good for health:

Especially if there are children and the elderly at home; He will give you a comprehensive consideration of the wardrobe structure, space layout, human body mechanics and other aspects of the brand wardrobe; Wardrobe does not have a high status in home improvement, although its style and style are a crucial part of renovation.

4.But you can't "give up everything", can you? You can't fail to consider its practicality!

Customized wardrobes, because of the advanced production equipment of custom manufacturers, can make a lot of personalized small parts, such as trouser racks, mirrors, etc. Wardrobe storage. However, carpentry wardrobes have many limitations.

Even if the internal structure of the wardrobe is not satisfactory, it cannot be changed. Up to a few simple parts, such as drawers, can be added to make it easier to store your clothes.

I think when choosing a brand wardrobe, it is better to choose a woodworking board to play a cabinet, because the woodworking board can have a good sense of fashion when playing a cabinet, and in the process of playing a cabinet, you can create the shape you want, have a good use of space, can divide the cabinet into the shape you want, and has a good closeness.

I think the former is a little better than the latter, because the former is relatively simple to decorate, but it is durable and easy to carry out daily maintenance.

The brand wardrobe is better, and there will be some particularly good materials in the home, and there is usually no great smell, there will not be a lot of formaldehyde, which is very exquisite.

It is better to choose a brand of wardrobe particleboard, such a board looks very good-looking, and the quality is relatively good.

I think the former is a little more than the latter, because the former is simple in decoration, but it is durable and very leisurely to perform general protection.

If it is the same (e0 e1 e2) board, fir board and woodworking board are better than particleboard and MDF, which are more environmentally friendly, have strong moisture-proof ability and are more widely used, especially in medium and high decoration. (Note: particle board is a type of particle board).

Fir plank is a large-format thick board made of short timber through finger tenon jointing and length, and combining width. It is generally made of high-quality wood (at present, more fir is used, so it is commonly known as fir board) as the base material, and is made by high-temperature degreasing and drying, finger jointing, splicing, sanding and other processes. It overcomes the process characteristics of some boards that use a lot of glue and bonding.

At present, this product is widely used in the high-end decoration of western developed countries and large and medium-sized cities in China, and it is also one of the most environmentally friendly decorative plates for interior decoration. Fir board, also known as fir integrated board, fir finger joint board.

Blockboard, commonly known as large core board, wood core board, woodworking board, is made of two pieces of veneer in the middle of the glued splicing board. The total thickness of the two-sided adhesive veneer of the blockboard shall not be less than 3mm. The width of the corner defects of all kinds of blockboards within the nominal format shall not exceed 5mm, and the length shall not be greater than 20mm.

The intermediate plank is made of high-quality natural wood planks after heat treatment (i.e., drying in the drying room), processed into wood strips of a certain specification, which are spliced by a puzzle machine. The spliced wooden board is covered with two layers of high-quality veneer on both sides, and then glued by cold and hot presses.

Particleboard and particle board are actually the same kind of board, but they are called differently. In addition, you can't just say that the plate is good, no matter what kind of plate is good and second, it depends on the manufacturer and the test certificate. If it is the same (e0, e1, e2), I personally think that it is fir plank, woodworking board is better than particleboard, MDF.

It is best to use multi-layer solid wood boards. At present, the application of multi-layer solid wood board has been very common, such as composite solid wood flooring (multi-layer solid wood flooring), multi-layer solid wood melamine veneer. It is best to use multi-layer solid wood melamine veneer (some are also called paint-free ecological boards, or paint-free ecological solid wood multi-layer boards) to make wardrobes, which have high environmental performance, deformation resistance, ease of processing, and color diversity.

Which is better, particleboard or MDF?

1.Particleboard vs MDF: structure

Particleboard is a multi-layer structure, the surface is equivalent to MDF, and the density is good; Inside, the layer of wood chips retains the fiber structure, and the layer structure is maintained by a specific process, which is very close to the structure of natural solid wood panels.

2.Particleboard vs MDF: timber

MDF uses sawdust, which is at the end of the forestry industry, and the material itself has no fiber structure at all. The particleboard uses lamellar wood chips that retain the fibrous structure and are machine-processed from untimber tree branches, rather than scraps.

3.Particleboard vs MDF: processing technology

Since the raw material of MDF is close to powder, the surface area of the same volume of material is much larger than that of lamellar wood chips used in particleboard. The adhesive consumed by board bonding and molding is also far more than that of particleboard, which determines that the density of MDF**, density (specific gravity), and formaldehyde content are higher than that of particleboard. It can be seen that the high density board is due to high cost rather than high performance.

Modern particleboard production processes use aerial atomization spray adhesives and layering processes, resulting in lower amounts of adhesives, more rational board structures, and therefore better quality. The plates used in our company are produced by this process.

4.Particleboard vs MDF: Scope of application

Due to its uniform and delicate internal structure, MDF is widely used in the furniture industry to replace wood processing flower lines and carved products, such as European-style furniture door panels, hats, decorative columns, etc. Particleboard is widely used in the panel furniture industry because it is not easy to bend and deform, has a high strength-to-weight ratio, good nail holding force, and low formaldehyde content. Most of the international custom wardrobe brands and well-known domestic enterprises choose high-quality particleboard.

Particleboard and MDF have their own merits, and it can't be said that it's good, that it's not good, and it can only be compared in different uses, such as making furniture in beds, cabinets, and doors with medium density, using high density for laminate flooring, and chipboard for desktops or something, in fact, it mainly depends on what you're used for, and MDF is generally used to make doors, and particleboard is used to make cabinets more, the uses of the two are different, and I also introduce you to some things about the two materials of particleboard and MDF. Different materials have different uses, and if you want to decorate, you can make furniture according to the properties of particleboard and MDF.

Advantages of particleboard:

a. Good sound absorption and sound insulation performance; Particleboard is insulated and sound-absorbing.

b. The inside is the granular form of the cross staggered structure, the performance of each part direction is basically the same, and the structure is relatively uniform, so the nail holding force is good, and the transverse bearing capacity is good.

c. Strong moisture-proof performance, small expansion coefficient after water absorption, and is widely used as raw materials for cabinet products with humid environments such as cabinets and bathroom cabinets.

c. The surface of the particleboard is smooth, the texture is realistic, the bulk density is uniform, the thickness error is small, the pollution resistance, the aging resistance, the appearance is beautiful, and it can be painted and various veneers;

f. In the production process of particleboard, the amount of glue used is small, and the environmental protection coefficient is relatively high.

Particleboard disadvantages:

a. The inside is a granular structure, which is not easy to mill;

b. It is easy to cause the phenomenon of tooth burst when cutting the plate, so the requirements for processing equipment are high;

Advantages of MDF::

a. The surface of the fiberboard is smooth and flat, and the material is fine, which can be convenient for modeling and milling.

b. The toughness of the fiberboard is good, and it is not easy to break when the thickness is small (such as 6mm, 3mm).

MDF disadvantages:

a. The moisture resistance of the fiberboard is poor, and the expansion coefficient is large after absorbing water.

b. The inside of the fiberboard is a powdery structure, the nail holding force is poor, and it is easy to loosen after the screw is tightened.

c. Due to the low strength of fiberboard, the height of furniture should not be too high, most of which are 2100mm.

e. In the production of fiberboard, due to its internal structural characteristics, the amount of glue used is large, and the environmental protection coefficient should be low to a certain extent.

So comparatively speaking, particleboard is more practical.

Personal opinion: Particleboard is very resistant to water, does not swell when exposed to water, but is very brittle. MDF has poor water resistance. Relatively resilient...

1. The materials are different.

Particleboard is processed by high temperature and high pressure after the log is crushed, and wood scrap is the main raw material. And MDF, also known as fiberboard. Its main raw material is plant wood fiber, which is made by hot grinding, paving and hot pressing.

2. The appearance is different.

Outwardly, the cross-section of the particleboard is three-layered, low in the center and high at the ends. The outer two layers are finely arranged fine particles, with wood chips in the center and a honeycomb cross-section. The cross-section of the MDF is the same color and the particles are evenly distributed. The appearance is flat and the processing is simple.

3. The characteristics are different.

Particleboard has poor bending resistance and compressive resistance, loose density, and the amount of formaldehyde in simple loosening is higher than that of MDF. Its advantage is that the interior is interspersed with uneven structure, the nail holding force is relatively good, and the transverse bearing capacity is strong. MDF has a tight structure, good shaping, is not easy to be deformed by moisture, and has low formaldehyde content, but the whole lacks a sense of texture, so the nail holding force is poor, and if the screw is tightened twice in the same place, the fastening force will be lost.

4. The scope of application is different.

Particleboard is mostly used in panel furniture. Generally, the substrate of PVC adsorption door panel is MDF. In more detail, MDF will be used for storerooms, shoe cabinets, door covers, window covers, baseboards, etc.

Particleboard is a kind of MDF, and the range of MDF is very wide, so please ask clearly.

Particleboard is a little better and has nail grip.

3 joinery: I directly suggest that you don't use it, because the furniture made of this board can not be disassembled and assembled repeatedly and is prone to cracks, because in order to be firm, usually the decoration company will nail it to the wall, the wall will be affected by the temperature will appear thermal expansion and contraction, and it will also affect the cabinet, so 3-5 years will definitely have a problem %100, and ** is not cheap, now the decoration company's ** blockboard is generally at 120 yuan, but the cost performance is much lower, it is characterized by not strong enough and easy to deform and After you're done, you're going to have to do paint, and that's going to be a direct pollutant.

In the north to do furniture I suggest that you can choose some quality solid wood particle board to do customization, the reason is that the weather in the north is relatively dry with solid wood is easy to crack, good and very expensive, in addition to do customization, especially the wardrobe cloakroom, the reason is that this is not a waste of space, ** and the finished product is almost, I don't know what city your home is, you had better look at the brand of custom furniture in the local city.

Answerer: guozhixin11 - Xiucai Level 2 2009 I am also doing decoration, the above you said the opposite, buy a little better woodworking board to make furniture than MDF and particle board are better woodworking board is 100% non-deformable MDF furniture door made of smaller can also be a little wider on deformation, before I was in the furniture factory to make furniture, with MDF to make the door often deformed, can not be processed, with woodworking board is just high cost, we now make furniture with MDF cabinets, woodworking board to make doors, As long as the door is not deformed at that time, it will never be deformed in the future. It's all about your economy.

Woodworking boards are best.