If you want to have a high yield and a bumper harvest of wheat, what medicine should you take?

If wheat wants to achieve a good harvest, it is necessary to first fertilize the soil, that is, after the autumn harvest, add enough basal fertilizer (soil fertilizer or compound fertilizer), turn the land deep and fine, and sow it in a timely manner. To achieve the seedlings are all strong, the tillering rate is high, water once before the ground is frozen, the wheat fungicide is generally used 3 times, and tebuzole is used in the wheat rejuvenation period. Prochloraz, thiofuramide and other prevention and control of sheath blight.

Before the wheat flowering stage, benzene is sprayed. Pyraclostrobin, fluconazole. carbendazim, propiconazole.

Azoxystrobin and other prevention and control of scab.

Wheat "one spray and three prevention" is the use of insecticides, fungicides, plant growth regulators, micro fertilizers and other mixed spraying of wheat to achieve disease and insect prevention, dry and hot air, premature aging, increase 1000-grain weight, and ensure that wheat production and income increase are the key measures. It is necessary to figure out the three factors that affect wheat yield: the number of ears per mu, the number of grains per ear and the weight of 1000 grains, the product of these three data is the yield per mu of wheat, and all agricultural operations done by farmers are around these three elements, and spraying is no exception.

Many farmers and friends use urea top dressing, especially back to green fertilizer, for fear of chasing over, afraid that it will cause wheat to be greedy for green and late maturity, easy to lodging, this statement is not entirely right, theoretically speaking, if the first section of wheat is too thin and too long easy to lodging, now the introduction of a spray three prevention, this kind of ** is very good, can completely help farmers increase production and income, there are foliar fertilizers, pesticides, and regulators, but also to prevent and control various diseases, such as more serious rust, powdery mildew, sheath blight, scab, total erosion.

The effect of weeds on wheat mainly includes competition for water, fertilizer and space, thereby reducing wheat yield, and the following agents can be selected according to different grass directions and resistance: diflusulam, zolaxone, alkynyl resin, dicamba, methyldisulfuron, etc. It is impossible for any kind of crop not to be affected by diseases, insects, weeds, weather, etc.

Wheat has a long growth period, after four seasons of spring, summer, autumn and winter, there are many diseases and pests, weeds are seriously harmed, and it may also experience the damage of spring cold.

The first thing I recommend to you is potassium dihydrogen phosphate. Although potassium dihydrogen phosphate is common, it does play an important role in increasing wheat yield and harvest. Potassium is beneficial to improve the stress resistance of wheat, and the use of potassium dihydrogen superphosphate wheat has strong frost resistance and drought resistance, which is a good nutrient to prevent spring cold and dry hot wind, in addition, it can also improve the lodging resistance of wheat!

The most important elements are phosphorus and potassium, which can promote the fullness of wheat grains, which can improve the quality and yield of wheat.

Wheat was sprayed with 100 grams of phosphorus and potassium gold (99% high-purity potassium dihydrogen phosphate) + 15 grams of microboron mixed with water at the jointing stage. About 20 days before wheat heading, spray with 50-100 grams of phosphorus and potassium gold (99% high-purity potassium dihydrogen phosphate) + 15 grams of microboron mixed with 30 kg of water. Use a phosphorus potassium gold vault (99% high-purity potassium dihydrogen phosphate) 50-100 g + microboron 10 g spray about 15 days after wheat poplar flowering.

Pesticides should be used because pesticides can kill some pests and can make wheat grow better.

When spraying wheat pesticides, in addition to the single use of insecticides and fungicides, it should also be combined with corresponding regulators and foliar fertilizers, so as to be conducive to wheat stress resistance and yield increase.

It should be sprayed with some drugs to eliminate pests and diseases, so that the wheat can grow better, and most of the old farmers use this method, and it can also be used to control weeds well.

Brassin can be sprayed to increase wheat yield, but brassinin can only play an auxiliary role, and the key to plant yield increase is daily maintenance. If you want to increase the yield of wheat, it is recommended to soak the seeds with fertilizer water before sowing, add an appropriate amount of calcium to the water when irrigating the plants, and control the amount of fertilizer during daily maintenance.

Nutritional regulation agents, I mainly recommend potassium dihydrogen phosphate and brassinolide, in wheat tillering stage, jointing stage, grain filling stage, flowering stage, with bactericidal insecticides, spraying at least three periods, can improve the stress resistance of wheat, which is conducive to bumper yield and income!

Wheat fungicides are generally used three times, and five trillion bits are used in the wheat regreening stage. Sheath blight such as amine and thiamine has been prevented**. Spray benzene in front of the firearm.

Pyrazole chloroquinate, fluconazole carbendazim, career judge icrazole. Lactobacillus hydroester and other prevention of erythrobacterosis, and secondary prevention of wheat at the grain filling stage**. The commonly used agents are mainly lignan, amphetamine, ethylazole, patient, and acetazole.

Acetyl, fluconazole, tinidazole, coxazole, etc. When injecting medications, choose one of them and you're good to go.

In order to ensure a high yield and a good harvest of wheat, wheat pesticides are indispensable. This agent is mainly phenyl ester, chlorofluorocarbon, mites, avermectin, abi, abi. There are spirolin, etc.

Wheat aphids can be sprayed with pyrethroid thiourea, and spider mites can be sprayed with avermectin, abi.

The high yield of wheat is inseparable from nutrients, which mainly include potassium dihydrogen phosphate and tundrolide. Spraying three phases together with wheat tillering, firepuller, sausage machine, flower raising machine, and bactericide can improve the resistance of wheat and improve the high yield of wheat. Wheat is the core measure of insecticides, fungicides, plant growth regulators, imperfect agents in wheat to control pests and diseases, prevent dry and hot air, prevent premature aging, increase the weight of 1000-grain, and ensure the increase of wheat yield.

To see the flowers, we should master the principle of beating, the wheat in the field begins to bloom can be prevented with medicine, it is easy to grasp the time of medicine, and the prevention effect is good. Permethrin and testosterone and testosterone can be used. Potassium amine phosphate monobasic spray prophylaxis can also be sprayed with high-potency chlorofluorocarbons and testosterone, carbendazim and potassium dihydrogen phosphate.

Generally, when you look at the flowers, you will sprinkle the medicine and sprinkle it again once a week.

If you want to achieve high yield and harvest of wheat, you must first grasp the three factors that affect wheat yield: the number of radish ears, the number of ears and the 1000-grain weight. The product of these three data is the radish yield of wheat, and all the farm work that farmers do revolves around these three factors, and drug administration is no exception.

Before wheat heading, at this time, it can only prevent the onset of wheat scab, rust and powdery mildew, especially red mold can not be **, and apply drugs after the onset of the disease, just like making up for the dead. And wheat aphids will also creep up. The main thing is to hurt the ears of wheat.

The first is to spray pesticides at each stage of growth, and the other is to choose to spray pesticides to treat some weeds, which can also make the wheat more nutritious, and can also obtain high yields.

Spraying can be carried out during the wheat growth period, which can not only destroy other bacteria, but also make the wheat grow faster, thereby increasing its yield.

You can take some medicine, choose to hit it a few times every few days, so that it can make the wheat grow well, and it is also good.

Spraying pesticides once a week is more conducive to the growth of wheat and can also allow wheat to absorb better nutrients, thereby increasing yields.

Usually pay attention to the regular spraying of wheat to spray drugs, you can go to see the growth of wheat every other week, regularly pull out some bad seedlings, so as not to affect the growth of wheat, pay attention to the supplement of sunlight.

We should use pesticides to prevent pests and diseases, because wheat is very easy to produce insects, so that we can achieve high yields.

Pesticides should be applied in a targeted manner, as this will cause the least damage to wheat and can also increase wheat yield.

Wheat yield can be increased by means of chemical fertilizers, pesticides and biological agents, but scientific selection and rational use are required according to local climate, soil and wheat varieties. In general, the following are some commonly used production-enhancing drugs:

Nitrogen fertilizer: Nitrogen is one of the essential nutrients for the growth of wheat, and the appropriate application of nitrogen fertilizer can promote the growth and development of wheat and improve the yield. But overuse can lead to waste and environmental pollution.

Phosphate fertilizer: Phosphorus mold fertilizer can promote the root growth and photosynthesis of wheat, and can improve the yield and quality of wheat.

Potash: Potash can improve the disease resistance and adaptability of wheat, making wheat more drought resistant, thereby increasing yields.

Pesticides: Rational use of pesticides can control pests and diseases, reduce losses, and increase yields. However, it is necessary to pay attention to the dosage, method and frequency of pesticide use, so as not to affect the quality of agricultural products and the environment.

Biological agents: Biological agents refer to pesticides or fertilizers made by microorganisms, plants and other organisms, which have the characteristics of safety and environmental protection, and can increase wheat yield. Commonly used biological agents include bacterial fertilizers, enzyme fertilizers, biological pesticides, etc.

In short, to increase wheat yield, it is necessary to select appropriate yield-increasing drugs according to the actual local situation and the characteristics of wheat varieties, apply them scientifically, comply with relevant laws, regulations and standards, and ensure the quality and safety of agricultural products.

Wheat yield can be increased by playing brassin.

Brassin is a regulator of wheat growth, which can improve the efficiency of photosynthesis in plant leaves, promote the growth of plant roots, and improve the stress resistance of plants. But this is only an auxiliary pants, not to hit will be able to increase the yield, want to increase the yield of wheat, or to daily maintenance, wheat yield can be appropriately sprayed with some brassin.

Brassicasin, a new type of plant endogenous hormone, is recognized as a high-efficiency, broad-spectrum, non-toxic plant growth regulator, strong penetration, fast absorption, at very low concentrations, that is, can significantly increase the growth of plant nutrients and promote fertilization. It can effectively increase the chlorophyll content, improve the efficiency of photosynthesis, promote the root and seedlings, and protect flowers and fruits. Improve the resistance of crops to cold, drought, salinity and alkali, and significantly reduce the occurrence of diseases; And it can significantly alleviate the occurrence of pesticide damage, make crops quickly resume growth, and can eliminate disease spots.

Three stages of wheat production

1. Jointing period.

For vigorous seedlings and strong seedlings, it is necessary to focus on control after returning to green, postpone spring fertilizer and water, and apply nitrogen fertilizer at the jointing stage. This period can increase the weight of the grains, and after the end of tillering, there is a phenomenon, the number of tillers is more, it does not mean that the number of ears must be more, there will be some invalid tillers. Timely topdressing of nitrogen fertilizer at the jointing stage to reduce ineffective tillering will increase the number of ears of wheat, so as to increase the yield.

2. Booting period.

Top application of nitrogen fertilizer at booting stage can improve the quality of wheat and increase seed setting rate. Foliar fertilizer can be used for top dressing at booting stage, and the concentration of urea solution should also be noted, with 50 grams of urea per mu, and it can also be mixed with other pests and diseases to spray.

3. Grouting period.

The grain filling stage is also a critical period for wheat high-yield sprint, which is mainly to promote grain size, grain saturation, and increase the final weight. When pouring grout water, about 5 catties of urea can be applied with water. It can also be combined with one spray and three anti-spray urea solution, with potassium dihydrogen phosphate and brassinin to make foliar fertilizer to prevent premature aging and increase weight.

Hello, the following herbicides can be applied after the wheat emerges.

1. Huss suspension or 10 Huss EC. It can prevent a variety of monocotyledonous weeds. 40-80 ml of mulberry suspension, or 10 mulberry emulsifiable concentrate, 30-50 ml, sprayed with 30 kg of water per mu.

The spraying time should be at the 3-5 leaf stage of wheat. Second, the 100 jia mixture. It can control a variety of broad-leaved weeds, especially hard-to-control weeds such as pig damage and spring knotweed.

10-12 ml of 48 herb dichloride per mu, 125-150 ml of 20 2 methyl 4 chloride aqueous agent, and 30 kg of spraying before mixing with water. The spraying time is from the 3rd leaf stage of wheat to before jointing. This mixture should only be applied to rice crops in the later crop.

3. 75 Jurang Regret Broad Star Drying Suspension. It can prevent a variety of broad-leaved weeds. Use 1-2 grams per mu and spray with 30 kg of water.

The spraying time should be at the 3-5 leaf stage of wheat. IV. 20 Make it emulsifiable butter. It can prevent a variety of bright broad-leaved weeds, especially for weeds such as small whirlwind flowers that are difficult to control.

60-100 ml per mu is used, and 20 kg of water is sprayed. The spraying time should be at the 3-5 leaf stage of wheat.

In order to improve the effect of weed control, we must pay attention to the following points: the first is to strictly grasp the appropriate period of medication. Take the medication in late November as the appropriate source of the code, pay attention to the weather forecast in advance, choose a sunny day, no frost and heavy rain within 4 days, and the field is not muddy and waterlogged, and the average temperature of the day is higher than 8.

The second is to pay close attention to the quality of medication. It is necessary to use sufficient amount of medicine and water, spray fine mist, and strive to improve the prevention effect. A certain humidity should be maintained in the field before and after pesticide application to ensure the normal play of the effect.

It is best to seize the favorable opportunity after rainfall to use medicine, and the fields with severe drought should be irrigated and drained first, and then removed with medicine. The third is to ensure the safe use of drugs. Master the use of medicine when the cold tail is warm and there is no stagnant water in the field to avoid pesticide damage.

It is best to choose a sunny day with a light day and take it at noon. During cold snaps or in low-lying waterlogged fields, isoproturon should not be used. In addition, it is necessary to consider the safety of wheat field herbicides for the next crops, and chlorsulfuron-methyl, mesulfuron-methyl and their compounds should not be used.