-
Write the answer first: bacterial film.
Fish tanks need to be cleaned regularly.
Just wipe it regularly with a soft cloth, sponge, etc.!
Some fish tanks are at the waterline, and there are white gypsum powdery patches, which are water alkali adherence.
It can be removed by wiping with a cloth dipped in vinegar.
-
It's fish feces, add a filter to the fish tank or change the water frequently, it may also belong to the floating matter that the filter cotton can't absorb, generally food crumbs, no problem, you can add a few more layers of cotton to the filter.
Fish tank, a kind of water tank for live fish, the tank body is transparent, mostly glass, and can also be used to raise tropical fish or goldfish for ornamental purposes. The fish tank is not only a home for the fish, but also a common life for the family. The flawless double-layer float glass not only creates a warm home for the fish, but also ensures the safety of the overall living environment.
Although the filtration equipment in the fish tank can filter fish feces and food residues, it is also necessary to clean the fish tank, water appliances and filtration system frequently, and clean up the garbage in the fish tank in time to avoid pollution and affect the health of the fish and human body.
Pay attention to indoor ventilation and purification, and families with conditions can be equipped with air purifiers or air ventilators.
Precautions: There must be dechlorinated water, otherwise if you directly add tap water to raise fish, the fish will not live for three days, because the tap water still has chlorine, which is toxic. Dechlorinated water has the effect of removing chlorine in water and killing bacteria in water.
When changing the water, drop two drops of dechlorinated water, stir well and put the fish into the tank.
Don't change the water directly, you can use another fish tank or something that can hold water to connect to the tap water first, and then leave it for 24 hours, it is better to be exposed to the sun when changing the water, pay attention when changing the water, you can't pour out all the original water, just replace about half.
If you can keep some small tropical fish in a small room, you can keep large fish in the office, living room or larger room, and at the same time, you should control the density of fish and the amount of food to avoid contamination of the fish tank with excess food.
-
What are the little white particles under the fish tank? It should be fed too much, the koi are very edible and can be pulled. Pull out the feces and your nitrifying bacteria can't keep up.
So the water is not clear. Try changing the water, a little bit every day. It doesn't matter if there is damage on individual fish.
As long as it's not an infection, you'll be fine.
-
You should have an aeration device, those small white particles may be tiny bubbles, permeating the water, which is not harmful to the fish tank, but indicates that the aeration is sufficient.
-
White stuff may be limescale, bacterial film.
Use an adsorption brush to dip the meal or vinegar.
Scrub slowly and vigorously to remove white dirt.
-
Summary. A glass-tubular fish tank thermometer with some counterweight particles at the bottom just keeps the thermometer vertical under the buoyancy of the water.
The fish tank thermometer shattered, the black particles at the bottom were sprinkled at the bottom, and what was that particle? There is no harm.
Hello, I am Mr. Xiao Chen, your question will be handled by me, it will take a while to sort out the answer, please wait patiently for 5 minutes
Hello, the composition of these particles is iron, so you don't need to worry about harm to the human body.
A glass-tubular fish tank thermometer with some counterweight particles at the bottom just keeps the thermometer vertical under the buoyancy of the water.
A mercury thermometer is available. A mercury thermometer is a type of expansion thermometer. Measuring the temperature with a mercury thermometer is not only relatively simple and intuitive, but also avoids the error of an external far-land thermometer.
I hope it helps, I wish you a happy life, and if you can, you can give a thumbs up Oh, thank you <>
-
Impurity. It's useless, since there is no problem with the water quality of the fish tank from above down, it proves that there is indeed no problem, and this phenomenon will appear after we raise ornamental fish halfway through, adding filter material or bottom sand, etc.
Too much limestone in the fish tank, resulting in poor water quality, to be precise, is not poor water quality, but because of too many impurities, this kind of impurities will not cause any changes in the water quality of the fish tank in the short term, at most the hardness of the water body may be larger.
It is the so-called gum left on the wall of the fish tank, in fact, although it will adhere to it, but it is easy to remove, even if you use a finger stroke, it will be removed, so you can use tools such as magnetic brushes, and one point, these gelatins will not be eaten by scavengers at first.
Only if there is too much adhered organic matter and algae, the scavenger will be interested in them, so when you see this phenomenon in the fish tank, there is no doubt that you can wipe the tank wall, there is no second option, this method is the fastest.
-
In these sand and filter media, there will be some small particles and gum that can not be completely precipitated, for these small particles, they will only continue to float around in the water body of the fish tank, and the extremely fine particles in the fish tank can be seen by the naked eye.
In addition, there will be a colloidal substance, there is a certain adhesion, whether it is the wall or the bottom of the tank, or the various furnishings in the fish tank, will be adhered to it, I feel that the wall of the fish tank is still gray or white, but there is no problem with the water quality of the fish tank.
These gelatins are very harmful, not only will they adhere to the fish tank wall, but also will continue to adhere to other debris in the fish tank, but also provide a base for a lot of algae, the fish tank wall is very smooth, even if the algae need to breed it takes a certain amount of time.
These calcareous gums need to be diluted through proper water change to reduce their concentration in the water body, these things are soaked in water for a long time, and they will not be so oxidized in the air, so there will be gradually less and less.
There is also when buying home, be sure to go carefully cleaned, try not to leave any residue substance, for the large particulate matter that has been able to precipitate at the bottom of the fish tank, if it is a bare tank to raise ornamental fish, it can be solved by pumping the bottom to change the water.
As long as the same size filter is placed on the top of the fish tank, it becomes a powerful upper filter. Of course, the bottom filter has better collectibility, which can take into account both aesthetics and practicality. Existence is inevitable. As long as the space is used and the filter media is fully utilized, the desired effect can be achieved.
-
Fiber particles. These fiber particles** are found in fish feces and food debris, and it is essentially the "lignin" that is the most difficult to break down by bacteria. These little things are formed when manure and food scraps are crushed by a stream of water or a circulating pump.
Because these things are purely physical, and the water quality of the fish tank is biologically turbid or the organic content is too high and turbid, which is completely different, so it will be relatively easy to control.
I'm afraid that we will misjudge this phenomenon without knowing it, and when there is a problem with what water quality, we have to add nitrifying bacteria to the fish tank or indiscriminately drug, nitrifying bacteria do not eat lime, and the drug is not lime disease, we still do it according to the actual situation to judge and make the right choice.
You can add a little potassium fertilizer to the fish tank, it is said that this thing can react with these limes to make them disappear completely, but as for whether this potassium fertilizer is harmful to some fish, and how much is appropriate, no one can say the exact data.
The last point, is the old way of fish farming habitual methods, if it is a bare tank, can clean up these tank wall debris, so that they quickly condense, and then through the bottom of the water change and continuous cleaning of the filter filter, but also only the water purifier I said can be done, this method is also more convenient, as long as it is operated properly, it will not have any impact on the water quality of the fish tank and ornamental fish.
-
The black particles at the bottom of the tank are generally sediment, pottery or sand, which are used for planting aquatic plants.
-
There may be 2 kinds of black particles at the bottom of the fish tank, one is aquatic weed mud and the other is ceramsite, if there is no aquatic weeds on it, it must be ceramsite, if it is covered with aquatic weeds, it is a little more likely to be aquatic weed mud, and it is not excluded that the role of aquatic weed mud is to plant aquatic weeds and soften water quality, the role of ceramsite is a cheap bottom material, and fish feces can not be found at the bottom with ceramsite, because the feces will slowly disperse with the flow of water on the ceramsite, and the ceramsite can be washed, and the aquatic weed mud can not be washed, I hope it will help you.
-
It is activated carbon that has the effect of stabilizing water quality.
-
1. Replace the circulating pump.
A standard fish tank circulating pump should produce 8 to 10 times the total amount of water per hour.
In fact, many fish tanks come with a circulating pump that is not enough to support the effect of the air tank, and it is completely possible to increase the frequency of water circulation by replacing the circulating pump.
2. Add a magic carpet.
However, when making this choice, you will have to wash the cotton more often, because the magic carpet is more likely to clog than white cotton.
For example, I used to wash my face once a week, but now I have to wash it twice a week.
3. Use EM bacteria.
The EM strain contains a bacterium that many people are not familiar with, called "actinomycetes", which can effectively break down "lignin", which can speed up the decomposition of these nasty little things. However, we must use EM bacteria according to the instructions, excessive use will lead to a reduction in dissolved oxygen in the water body, which may cause hypoxic dead fish.
-
Summary. Normal, it belongs to the floating matter that the filter cotton can't absorb, generally food crumbs, or fish feces, there is no problem, just add a few more layers of cotton to the filter.
The water in the fish tank seems to have small suspended particles, what should I do?
Hello, I have seen your question and am sorting out the answer, please wait a while
Normal, it belongs to the floating matter that the filter cotton can't absorb, generally food crumbs, or fish feces, there is no problem, just add a few more layers of cotton to the filter.
I've added it, and I've cleaned the whole tank.
I also got two filters that didn't work.
This is the waste produced by the metabolism of fish.
is a very normal phenomenon.
Just change the water frequently.
But I've cleared all the rods and re-sanitized them, and now it's been more than a day, and there are still a lot of small particles floating around My traffic lights are dead.
It is recommended to change the water frequently.
I've been changing the water for many days, and it's still not working, and I'm now changing the water in the entire fish tank, and it's not okay, and I've searched for your opinion on it, and I'm asking you because it's useless.
Let's switch to fish.
I think it's good to pick out the needles that have been roasted over the fire.
Yes, but the particles should not be too small, after all, it is the load-bearing main column, and safety first.
In this way, the human body inevitably inhales various particles every day. Even if it is labeled as harmless, it should be careful. If we only look at it from the point of view of harm, any particle that exceeds the number is harmful.
In terms of the causes of weld marks, in order to reduce weld marks, it is necessary to reduce the possibility of the phenomenon of "diverting and converging" of materials during injection or extrusion. In order to reduce and eliminate weld marks on the surface of injection molded products, there are the following methods: >>>More
Are you bare tank goldfish? If yes, is the white grainy stuff soft or hard? Could it be bait? >>>More