How to tear off the rear glass film of the car, how to tear off the glass film of the car

Use a wallpaper knife to scrape a corner, then slowly remove the film, and gently scrape the glue with a knife in the more difficult places to assist in tearing the film. Finally, remove the glue, find some gasoline or alcohol to wipe it will be easier to remove.

Automobile glass film is a layer of film-like objects pasted on the front and rear windshields, side windows and sunroofs of the vehicle, which can reduce the damage caused by ultraviolet radiation of items and personnel in the car, reduce the temperature in the car and reduce the use of automobile air conditioning through physical reflection, thereby reducing fuel consumption. The removal of the car film is still more laborious, and the final tear off effect will not be too ideal, so it is recommended that the owner go to a special car film store for disassembly and assembly.

If you want to replace the car film effortlessly, it is best to buy a brand of car film and a powerful store to install it before buying and installing the car film, which can reduce the risk of the film and avoid buying inferior film or fakes. It is also inconvenient for the future work of tearing the film. If you want to apply the car film yourself, you should find a closed place (such as a garage), because the film is most afraid of dust and sand, and it has a great impact on the car film on the street or in a very dusty place.

Removal method of automobile glass film.

1. Tear off directly, the inferior film is easier to deal with, the adhesive strength of this film is not particularly good, and it is easier to remove. High-quality car film is more difficult to do, and you need to find a master or buy more professional tools to do it. The professional tool is mainly a degluing knife, because it is professionally used to remove glue, it will be more particular in use, and the blade is also different from ordinary knives to prevent cutting the car glass during the degluing process.

2. Edible vinegar is removed. Apply the vinegar evenly on the sticker with a cotton swab. Through the glass, we can immediately see the vinegar slowly diffusing between the glass and the sticker.

At this time, scratch back and forth on the self-adhesive with a cotton swab, and after a while, the self-adhesive begins to peel off piece by piece, and the residual components of the self-adhesive on the glass are very small, and when you wipe it with paper, it will be as clean as new.

3. Removal of wind oil essence. When the wind oil essence first came into contact with the self-adhesive, there was no obvious change. We persistently applied wind oil essence to the stickers and then scratched them with cotton swabs.

Slowly, we felt the stickers soften, and some of the stickers had been scraped off. As we continued to apply and scratch, the reaction between the two became faster and faster, and in about 2 minutes or so, a piece of self-adhesive was cleaned off.

4. Alcohol removal. A handful of alcohol brushed the stickers on the glass, and immediately saw the stickers slowly soften and dissolve. With a gentle hand, the sticker leaves the glass cleanly.

Here's how to remove the car glass film:

Tools: Changan Yuexiang, glass film, blade.

1. First of all, use a blade or wallpaper knife to cut a small opening without hurting the car paint, which is the entry point for tearing the glass film.

2. After tearing a little, you can tear the remaining glass film directly by hand, do not use force, to avoid breaking when tearing the glass film, so that you can tear off the glass film faster.

3. Degluing, when the glass film of the car is torn off, there may be residual glue due to too long time, so it is necessary to use a glue remover to remove it little by little.

4. Drying, after all the film is torn off, there may be some peculiar smell, which can be cleared or vertically guessed by ventilation and drying.

The role of automotive glass film

Reduce heat loss and filter strong light: It can effectively filter the dazzling glare of the sun and the glare of two cars meeting at night, improving comfort and safety. UV Block: Ultraviolet rays are a major contributor to the fading and deterioration of automotive dashboards, seats, and textiles in the solar spectrum.

Personal safety: After the glass is accidentally broken, the heat-insulating explosion-proof film can adhere the broken glass to the original place, prevent the glass from splashing and hurting people, and enhance the ability to prevent accidents and storms. Blocks heat:

Professional thermal insulation and explosion-proof film can block 50-85% of the sun's heat, significantly reduce the temperature in the car, and improve the comfort in the car.

<> "In fact, it is relatively simple to tear the car glass film, first of all, we can use fingernails or a relatively hard card like the banker's stupid card to lift one corner of the car glass film, and you can also use a blade if it doesn't work.

Then you can slowly tear off the car film, of course, if you want to be faster, you can use the heat of the hot air fan to tear off the glass film, because the first sock can make the stickiness of the glue file drop a lot after heating.

When the car glass film is torn off, there will be some residual self-adhesive attached to it, we can use alcohol nail polish remover or hot glue to remove it, of course, with tap water to clean it.

Finally, you need to wait for it to ventilate for a while, after all, there is still a lot of glue smell on it.