What is a dispenser? How does a dispenser work?

The dispensing machine is to use equipment to attach glue (not necessarily exactly glue, it may also be oil or other fluids) to the outside or inside of the product by pointing, dripping, smearing, spraying, injecting, etc.

Dispenser applications.

For example, many products in the electronics manufacturing industry will need to be bonded, as shown in the figure above, there will be many places where glue needs to be used for bonding in the production of a mobile phone.

In the case of manual dispensing and bonding, not only the speed is slow, but the accuracy of dispensing cannot be controlled, resulting in low product production efficiency, poor yield and poor product quality. The dispensing machine will not have such a problem, not only high efficiency, high precision, but also fast speed.

After a while, the more scientific statement is: the dispensing machine, also known as the glue coating machine, the glue dropping machine, the glue machine, the glue filling machine, etc., specializes in fluid control. The automatic machine that drip and coat the surface of the product or the inside of the product can realize three-dimensional and four-dimensional path dispensing, precise positioning, precise glue control, no wire drawing, no glue leakage, and no glue dripping.

Many manufacturers in our industrial park have purchased Desen's dispensing machines, which have fast dispensing speed and high precision, and they have a precision weighing system, intelligent control and detection of dispensing volume, and the reading can be accurate to, so that the dispensing amount is consistent and meets the dispensing requirements of mini LED.

The automatic machine that specially controls the fluid and drips and coats the surface of the product or inside the product can realize three-dimensional and four-dimensional path dispensing, precise positioning, precise glue control, no wire drawing, no glue leakage, and no glue dripping. The dispensing machine is mainly used for glue, paint and other liquids in the product process to accurately point, inject, coat, and drip to the precise position of each product, and can be used to achieve dotting, line drawing, round or arc.

Dispensing machine: It is to apply the glue to the product according to the preset path to achieve the purpose of bonding, fixing, waterproof, anti-vibration and so on. It is divided into several parts: dispensing machine hardware, dispensing software, dispensing valve and controller, and glue.

Dispensing is to dispense and coat UV glue, conductive glue, heat dissipation glue, and AB glue to the designated position of the workpiece through the dispensing device.

There are three modules involved:

Dispensing hardware: dispensing machine (manual, automatic, and some machines with visual, light source, height measurement module) Dispensing software: industrial control system, dispensing system, 3D glue detection system glue:

The principle of waterproof glue, special glue, heat dissipation silica gel, UV glue, conductive glue, heat dissipation glue, AB glue, etc. is through the cooperation of the above three modules, and the dispensing hardware moves according to the preset path, the glue is produced in proportion, and the dispensing software design and path are used.

Collaborate on dispensing. Composition dispensing machine.

Dispensing machine bai, also known as gluing machine, glue filling machine du, glue machine, etc., is an automatic machine that specializes in controlling fluids and dripping, coating and potting liquid on the surface of the product or inside the product.

Hello, the principle of Hangzhou Maisu special glue is to compress the air into the glue bottle or syringe of the dispensing machine, and then press the glue liquid into the feed pipe, in general, the air pressure is used to achieve the dispensing operation. There is a piston between the plastic bottle and the feed pipe, and when the piston is in the upper stroke, the piston chamber will be filled with glue; When the piston pushes down on the dispensing needle, the glue is pressed out of the nozzle. The amount of glue discharged is determined by the distance of the piston downstroke, which can be controlled manually or programmed according to the product requirements.

Before starting the machine, check whether the automatic dispensing machine is clean, there are water vapor and other problems that directly affect the normal operation of the machine. In the working state, it is not allowed to touch the dispensing head, needle nozzle, guide chain and other moving parts to prevent pinch accidents. If you find a special situation, you can press the red panic button in front of the fuselage to stop the machine immediately.

When the equipment needs to be moved, the air circuit and power supply must be cut off before it can be carried out. <

1. Check whether the automatic dispensing machine is clean, water vapor and other problems that directly affect the normal operation of the machine before starting.

2. It is not allowed to touch the dispensing head, needle nozzle, guide chain and other moving parts under the working state to prevent pinching accidents.

3. If you find a special situation, you can press the red emergency button in front of the fuselage to stop the machine immediately.

4. When the equipment needs to be moved, the gas path and power supply must be cut off before it can be carried out.

5. Don't pile too many things next to the machine to avoid improper operation.

6. It is necessary to wear gloves during operation, and try not to expose the **, so as not to get the glue on the body and have bad factors.

7. When operating the glue, you should have an understanding of the glue, the use of the situation, how to use it normally, so that it can be operated normally.

8. Regularly test the safety performance of the automatic dispensing machine.

9. Don't put anything on the workbench and keep it clean.

10. In the case of non-use for a long time, cut off the power supply.