-
The energy consumption of ordinary electric steam generator is better, and the use of carbon fiber electric steam generator is energy-saving, carbon fiber converts heat energy, water and electricity separation, is safe and stable, and has a semi-permanent service life, which is about 30% more energy-saving than similar products.
-
Which is more energy-efficient than a gas-fired one? A common misconception is that electric steam generators are costly, but this perception is often one-sided, such as in areas where electricity costs are low, and electricity is more cost-effective than gas. Therefore, only by understanding the environment in which the equipment is used can we calculate whether it is energy-saving or not.
Which is more energy-efficient compared to electric steam generator or gas-fired one.
1. Generally speaking, gas steam generators are more energy-saving than electric steam generators, and the cost of natural gas is one-third of that of electric heating (in the case of electricity costs 1 yuan per degree), everyone understands the truth that saving money is making money.
2. If the electricity cost of the place where the steam generator is used is relatively low, if each kilowatt-hour of electricity is between 3 and 5 cents, the transformer load is enough, and even there is a low price discount, then it can be said that the electric steam generator is more energy-saving.
Electric steam generators.
However, electric steam generators are much more thermally efficient than gas steam generators. Resistance heating elements transfer heat directly to the water, achieving a high heat conversion rate, and improving thermal efficiency is also a way to reduce fuel consumption. In addition, electricity is a clean energy source, eliminating the need for energy savers and emission sensors, which can reduce purchase and use costs.
-
The working methods of steam generators and steam boilers are different, but the steam generator is an endothermic and exothermic process of small-capacity equipment, as long as the output conditions allow, it can be used instead of steam boilers. Yijie environmental protection.
-
The steam generator is only useful when it is paired with the oven, and the steam generator alone is only a component and cannot complete the cooking.
-
Gas steam generators can replace steam boilers. Generally speaking, as long as the amount of steam is sufficient, it can be replaced, but the following situations need to be excluded:
1. When there is no natural gas pipeline on the site, the gas steam generator cannot replace the steam boiler, although the gas steam generator can also use liquefied gas as energy, but this is unrealistic for users who use large amounts of steam and need long-term steam consumption.
Gas steam generator manufacturers.
2. In some areas, the electricity bill is very cheap, and each kilowatt-hour of electricity can be as low as 2 to 3 cents, at this time, the cost of gas steam generator is not necessarily lower than that of electric heating equipment, and the use of gas steam generator here is not an advantage over electric steam boiler.
3. In areas with strict requirements for nitrogen oxide emissions, steam boilers or steam generators with electricity as energy are more suitable, which are clean, low pollution, zero emission, and suitable for cities with strict environmental protection requirements.
Gas steam generator use.
However, with the strict environmental protection policy, the R&D and production technology of steam generators is also constantly upgrading, and the emerging low-nitrogen gas steam generators have nitrogen oxide emissions of less than 30 mg, which can basically meet the environmental protection requirements of most urban areas, and are no less than electric steam boilers in terms of cleanliness.
In summary, gas steam generators can replace steam boilers, but when considering using gas steam generators instead of steam boilers, we also need to understand the use conditions of the equipment site first, so that we can choose practical and affordable steam equipment.
-
Electric steam generators are more efficient than gas steam generators. The electric steam generator uses direct heating and has small heat loss, while the gas steam generator belongs to indirect heating, and there are various heat losses, such as exhaust gas heat loss, incomplete combustion heat loss, etc.
Electric steam generates a rough caller.
1. Exhaust gas heat loss: the gas exhaust temperature of the gas steam generator is high, which means that part of the heat converted from the fuel is taken away by the flue gas, resulting in heat loss.
2. Incomplete combustion heat loss: due to the fuel properties or the combustion condition of the steam generator does not meet the requirements, some combustible gases will be discharged with the flue gas before they can be combusted, resulting in incomplete combustion heat loss of fuel.
The above two forms of heat loss affect the efficiency of the gas steam generator to a large extent, and the qualified fuel and the good combustion condition of the good stool can effectively reduce the heat loss and improve the efficiency of the gas steam generator.
Gas steam generators.
Therefore, compared with gas steam generators, the former is more efficient, mainly because there is a lot of heat loss in the process of energy conversion and transmission of gas steam generators.
Expansion: From an economic point of view, gas steam generators are more energy-efficient than electric steam generators, have lower operating costs, and can generally meet conventional production needs.
-
It depends on how old you are, generally it does not need to be inspected, that is, it is exempt from inspection, and the gas has to be seen according to the way you get the gas, which is also very good if it is convenient, otherwise there are other electric heating or biomass and the like.
-
Exemption from inspection can save a lot of procedures.
-
The advantages of gas steam generator include environmental protection, easy to use, reasonable system configuration, high thermal efficiency, and good economic benefits. In response to the call of the national environmental protection policy, the use of clean energy and low emissions have become an inevitable trend, and the gas steam generator replaces the traditional boiler with high pollution, and the operating cost is lower than that of the oil steam generator and the electric steam generator.
1. Environmental protection. Gas steam generators are fueled by natural gas or liquefied gas, which are clean energy sources and do not produce waste residue and polluting gases after combustion.
2. Easy to use. Compared with ordinary steam boilers, the installation and construction of gas steam generators are faster, there are no risks and hidden dangers, no boiler room, no need to go to the relevant departments for use certificates, and no annual inspection.
3. High thermal efficiency. The very high calorific value of natural gas or liquefied gas, combined with the full combustion of the fuel and the heat of the flue gas**, makes the gas steam generator more thermally efficient and less wasted energy than conventional boilers.
4. Good economic benefits. The low operating cost of gas steam generator is mainly due to the lower unit price of natural gas compared with other fuels or energy sources, and the equipment comes with a flue gas thermal energy system, which can also save energy consumption to a certain extent and improve the economic benefits of enterprises.
Low nitrogen gas steam generators.
With the stricter environmental protection requirements, low-nitrogen gas steam generators came into being, which control nitrogen oxide emissions within 30 milligrams to meet the needs of users who have insufficient electricity load or high local electricity bills and need to control emissions.
Based on the above points, the gas steam generator has many advantages, and is suitable for a wide range of industries, which is the choice of energy saving and environmental protection for steam enterprises.
-
Electric steam generator or gas steam generator? Hello dear, in terms of energy: 1 cubic meter of natural gas is equivalent to about 10 kilowatt-hours of electricity, and the cost of use is related to the energy and efficiency.
**: Commercial natural gas: 3 4 yuan cubic meters, commercial electricity:
1 degree of tomato. Equipment efficiency: 20% for general gas equipment stir-fry stoves, no more than 40% for large pot stoves and three-door steaming cabinets, and about 50% for gas steam generators.
The efficiency of a gas boiler is 60, 85%. The gas boiler with a very good empty core can reach about 90% at full load, but the utilization rate of the gas boiler is very low (pipeline loss, the boiler cannot be stopped when it is not in use, resulting in waste, etc.), and finally the overall utilization rate is not very high. If you use electricity, the efficiency of the heating element is about 95%, and the efficiency of electromagnetic heating is about 85%.
-
Summary. Generally speaking, gas heating is more energy-saving than steam heating, and the cost of natural gas is one-third of that of electric heating (in the case of electricity cost 1 yuan per degree), everyone understands the truth that saving money is making money. However, if there is no certain technology, there is a trouble in the adjustment of the gas burner, such as the gas pressure is high and low, the difficulty is on fire, and the air intake volume is not easy to adjust.
However, as long as you grasp its working principle, in fact, the failure rate of the burner is very low.
Which is more energy efficient, electricity, gas or steam.
Generally speaking, gas heating is more energy-saving than steam heating, and the cost of natural gas is one-third of that of electric heating (in the case of electricity cost 1 yuan per degree), everyone understands the truth that saving money is making money. However, if there is no certain technology, there is a problem in the gas burner rolling joint, such as the gas pressure is high and low, the difficulty is on fire, and the air intake volume is not easy to adjust. However, as long as you grasp its working lifting principle, in fact, the failure rate of the large grinding burner is very low.
Dear, I just made a mistake, it is natural gas that is more energy-efficient Among the three, natural gas is the most energy-saving.
I think so.
What about steam and electric heating?
Kiss, the two are relatively more energy-efficient with steam.
-
Summary. The electric steam generator equipment with the same evaporation capacity is cheap to purchase, the operating cost of the gas steam generator is relatively low, and the cost of natural gas is one-third of that of electricity (in the case of 1 yuan per kilowatt-hour of electricity). If the equipment works for a long time and consumes a large amount of steam, it can be said that it is more cost-effective to choose a gas steam generator.
In the case of about 1 piece of electricity per kilowatt-hour, if the steam generator is only used as a backup, occasionally used, and the use time is not long, then it is more cost-effective to choose the electric steam generator.
The user's local electricity bill is very cheap, between 3 and 5 cents per kilowatt-hour, and even there is a trough electricity discount, and the transformer load is enough, in this case, the electric steam generator is undoubtedly cost-effective.
How much more expensive is an electric steam generator than a gas steam generator.
Dear, hello blind fight, we have received your question, and we are preparing the answer for you quickly, and we will reply to you within five minutes! Wait a moment! ^
Ok thanks.
From the perspective of procurement cost, the procurement cost of electric steam generator is low.
From the perspective of long-term use cost, the use cost of gas is lower than the use cost of electricity (according to the comprehensive consideration of the use of each cubic meter of electricity in various places** and electricity costs), and the user of the electric steam generator is safe and easy to install.
I would like to know how much more electric gas generators for three-phase electricity are more expensive to use than natural gas, in percentage terms.
The electric steam generator equipment with the same evaporation capacity is cheap to purchase, and the operating cost of imitation gas steam generator is relatively low, and the cost of natural gas use is one-third of that of electricity (in the case of 1 yuan per kilowatt-hour of electricity). If the equipment works for a long time and consumes a large amount of steam, it can be said that it is more cost-effective to choose a gas steam generator. In the case of about 1 piece of electricity per kilowatt-hour, if the steam generator is only purchased as a backup, occasionally used, and the use time of each time is not long, then it is more cost-effective to choose an electric steam generator.
The user's local electricity bill is very cheap, between 3 and 5 cents per kilowatt-hour, and there are even valley electricity discounts, and the load of the voltage stop is enough, in this case, the electric steam generator is undoubtedly cost-effective.
Three-phase electricity is not as cost-effective as natural gas: boiling water, it takes 9 minutes and 34 seconds to defeat the noise, the rated power of the electric kettle is 1500w, and the electricity price is considered yuan kilowatt hours, then the cost = yuan. With natural gas:
Burn the rise of the chacha touch the cherry water, the gas meter from the go, ** count the yuan cubic meter, then the cost = (yuan. If the cost of using natural gas is converted into the same liter of water as boiling electricity, the cost is yuan.
Gas is cost-effective, gas can be divided into prices according to the use of residential stalls, and three-phase electricity** is calculated according to industrial electricity consumption, which is higher than civil electricity.
Which energy steam generator saves money depends on the actual situation, in addition to the purchase cost of the equipment, it also includes the user's local energy price and the maintenance cost of the steam generator. >>>More
How many industrial steam generators are mainly depending on what kind of steam generators you want to buy, thousands of cheaper ones, tens of thousands of expensive ones, if you need a customized steam generator, the price will be higher. >>>More
Summary of the application of electrostatic generators;
1. The steel plate is laminated and paper-covered, and the Fraser7360 electrostatic generator can be equipped with the corresponding electrostatic generator. >>>More
There are many brands of steam generators, and there are many manufacturers that produce and sell low-nitrogen equipment. >>>More
Ozonizer.
Function: Ozone can quickly kill bacteria in the air at a certain concentration. There are no toxic residues and will not form. >>>More