What are the basic subjects for Registered Geotechnical Engineer, what are the Exam subjects for Reg

I took the exam this year, but I didn't pass it, just a little bit...

But there are some lessons learned. First of all, you must read books in this exam, and you must pay attention to it ideologically. I'm just too careless...

Secondly, the structural mechanics and fluid mechanics you mentioned are difficult points, and there is no need to spend a lot of energy on them as far as the exam is concerned. Because the total score is 240 points, the structure is generally 24 points, the fluid is generally 10 points, and it is enough to reach 132, and it is a waste of one more point. It takes a lot of time to do well in these two subjects, so I suggest that you just know some basic concepts.

Let's talk about the morning exam. The morning exam is one question for one point, a total of 120 questions. In the specific subjects in your textbook, advanced mathematics and a few mechanics are the focus, and you should get a few more points.

Like computer, engineering, economics, laws and regulations, these are all concepts that are examined, and it is not difficult, and it can be won in a few days. However, last year, the electrical appliances and information section was no less than 20 points, and if you are not good at circuits, it is recommended not to delve into it, which is more disgusting. 2 minutes in the afternoon, a question, focusing on soil mechanics, engineering geology, rock mass mechanical structure, if you have not studied professional courses, it is recommended to take soil mechanics and engineering geology, these two are relatively simple, and the other two master the basic concepts.

In the afternoon exam, there are also engineering materials, construction, surveying, and textual concepts. As for the ratio, it seems to be not fixed, and it is generally proportional to the length of the tutorial book.

The general idea is to focus on advanced mathematics, theoretical material mechanics, engineering geology and partial textual subjects, supplemented by complex calculation subjects.

PS: You don't have to memorize the basic formulas, a manual will be issued during the exam, which contains the basic formulas for most subjects!

You can take the exam in this major, and you can apply for it after graduating from the bachelor's degree.

It's just that there are a lot of subjects involved, and I don't know how well you can master it.

If you want to review, I'll send you some information I used before, mainly past exam questions, you can check the difficulty and so on.

Geotechnical engineer examination subjects include geotechnical investigation; shallow foundations; deep foundation; Ground treatment；geostructures, slopes, foundation pits and underground works; geotechnical engineering under special conditions; **Engineering; Engineering Economics and Management.

Registered Geotechnical Engineer.

There are three examination subjects, namely the basic examination, the professional knowledge examination, and the professional case examination. The examination of each subject is divided into two time slots, morning and afternoon, with a total score of 240 points in the morning and afternoon of the basic examination, 200 points in the morning and afternoon of the professional knowledge examination, and a total of 100 points in the morning and afternoon of the professional case examination.

Geotechnical Engineer Exam Considerations

Candidates should carefully read the test instructions when taking the test, and fill in the name, admission ticket number, test paper** and other information accurately and completely according to the requirements, otherwise it will be treated as 0 points.

Due to the use of an automated score processing system for the marking of objective questions, there is no manual process of registering and verifying scores, except for special circumstances such as absenteeism, discipline violations, and zero scores, in principle, candidates will not be accepted to check their scores.

The above content refers to the Encyclopedia - Geotechnical Engineer Exam.

The geotechnical engineer examination is divided into basic examination and professional examination, the basic examination subjects are advanced mathematics, general physics, theoretical mechanics, material mechanics, fluid mechanics, etc., and the professional examination subjects are geotechnical engineering investigation, shallow foundation, deep foundation, foundation treatment, etc.

The morning section mainly tests the candidates' mastery of basic science, including advanced mathematics, general physics, theoretical mechanics, mechanics of materials, fluid mechanics, building materials, electrical engineering, engineering economics, and the afternoon section mainly tests the candidates' mastery of the theoretical knowledge directly related to geotechnical engineering.

Those who meet one of the following conditions can apply to take the basic exam:

1. Obtain a bachelor's degree or above in this major (referring to exploration technology and engineering, civil engineering, water conservancy and hydropower engineering, port and waterway and coastal engineering, the same below) or similar majors (referring to geological exploration, environmental engineering, engineering mechanics, the same below).

2. Obtain a college degree in this major or a similar major, and have been engaged in geotechnical engineering for 1 year.

3. Obtain a bachelor's degree or above in other engineering majors, and have been engaged in geotechnical engineering for 1 year.

Course content:

The basic examination is a closed-book examination, which mainly tests the candidates' mastery of basic science in the morning section, with 120 multiple-choice questions, each question is worth 1 point, and is divided into 11 subjects: advanced mathematics, general physics, general chemistry, theoretical mechanics, material mechanics, fluid mechanics, electrical and electronic technology, signal and information technology, computer application basics, engineering economics, laws and regulations.

In the afternoon session, it mainly tests candidates' mastery of professional theoretical knowledge directly related to geotechnical engineering, with 60 questions, each question is worth 2 points, divided into 9 subjects: civil engineering materials, engineering surveying, occupational regulations, civil engineering construction and management, engineering geology, structural mechanics, structural design, soil mechanics and foundation engineering, rock mass mechanics and rock mass engineering.

The registration period varies from year to year, but it is usually in mid-June. For example, in 04, it was from June 14th to 25th.

In '05, it was from June 20th to 30th. Basically, it's in June, and you won't miss it if you pay attention. Good luck with the exams.

Citizens of the People's Republic of China, who abide by national laws and regulations, abide by professional ethics, and meet the following corresponding conditions, may apply to take the Registered Civil Engineer (Geotechnical) Qualification Examination. 1.Basic Examination Registration Requirements (1) Obtain a bachelor's degree or above in this major (referring to survey technology and engineering, civil engineering, water conservancy and hydropower engineering, port and waterway and coastal engineering, the same below) or similar majors (referring to geological exploration, environmental engineering, engineering mechanics, the same below); 2. Obtain a college degree in this major or a similar major, and have been engaged in geotechnical engineering for 1 year. (3) Obtain a bachelor's degree or above in other engineering majors, and have been engaged in geotechnical engineering for 1 year.

2.Those who pass the basic examination and meet one of the following conditions can apply for the professional examination: (1) Obtain a doctorate degree in this major and have been engaged in geotechnical engineering for a total of 2 years; or obtain a doctorate degree in a similar major, and have been engaged in geotechnical engineering for a total of 3 years; (2) Obtain a master's degree in this specialty, and have been engaged in geotechnical engineering for a total of 3 years; or obtain a master's degree in a similar major, and have been engaged in geotechnical engineering for a total of 4 years; (3) Obtain a double bachelor's degree or graduate degree in this major, and have been engaged in geotechnical engineering for a total of 4 years; or obtained a double bachelor's degree or graduate degree in a similar major, and has been engaged in geotechnical engineering for a total of 5 years; (4) Obtain a bachelor's degree in this major, and have been engaged in geotechnical engineering for a total of 5 years; or obtain a bachelor's degree in a similar major, and have been engaged in geotechnical engineering for a total of 6 years; (5) Obtain a college degree in this major, and have been engaged in geotechnical engineering for 6 years; or obtain a college degree in a similar major, and have been engaged in geotechnical engineering for a total of 7 years; (6) Obtain a bachelor's degree or above in other engineering majors, and have been engaged in geotechnical engineering for a total of 8 years.

What are the application conditions for national registered cost engineers? Do you know the exemption conditions?

There are two types of geotechnical engineer examinations: basic examinations and professional examinations.

Professional cases are divided into two parts: professional cases and professional cases, the basic examination is divided into a total of 120 questions in the morning, each with 1 point; In the afternoon, there are a total of 60 questions on the professional foundation, each question is worth 2 points, and the morning and afternoon are objective questions, with a total of 180 questions, a total of 240 points, and generally 132 points are the passing line.

Precautions for geotechnical engineer preparation

First of all, it is necessary to integrate theory with practice. Learning knowledge must be linked to reality. It is necessary to put the knowledge introduced in the book to the test in practice. Think while learning, combined with the actual situation.

The second is a comprehensive review, focusing on mastery, and avoiding guessing and betting on questions. It is impossible for everyone to be familiar with all industries, there are always things that you don't know, and the exam has to be tested in almost every chapter and section, and every industry has to be tested. Therefore, it is necessary to focus on the key points required by the outline.

However, if you take the method of guessing and betting on the question, it will inevitably lead to a very small chance of guessing in the exam, and once you don't guess correctly, it will be difficult to pass the exam.

Registered Civil Engineer (Geotechnical) Examination Subjects: It is divided into two parts: basic examination and professional examination. The basic test is a closed-book test, and candidates are only allowed to use the uniformly distributed "Examination Manual" (which will be collected after the test), and it is forbidden to bring other reference materials.

1) The content of the basic examination includes: Advanced Mathematics, General Physics, General Chemistry, Theoretical Mechanics, Mechanics of Materials, Fluid Mechanics, Fundamentals of Computer Application, Electrical and Information, Engineering Economics, Laws and Regulations, Civil Engineering Materials, Engineering Surveying, Occupational Regulations, Civil Engineering Construction and Management, Structural Mechanics and Structural Design, Soil Mechanics and Foundation Engineering, Engineering Geology, Rock Engineering and Foundation Engineering, a total of 18 subjects.

2) The content of the professional examination includes: geotechnical engineering investigation, basic principles of geotechnical engineering design, shallow foundation, deep foundation, foundation treatment, geotechnical structure and slope protection, foundation pit engineering and underground engineering, geotechnical engineering under special conditions, ** engineering, geotechnical engineering testing and monitoring, engineering economics and management, a total of 11 subjects.

The subjects of the Registered Geotechnical Engineer Examination are Professional Knowledge Examination, Basic Examination, and Professional Case Examination.

1. The basic examination is a closed-book examination. In the morning section, it mainly tests candidates' mastery of basic science, with 120 multiple-choice questions, each question is worth 1 point, and is divided into 11 subjects: Advanced Mathematics, General Physics, General Chemistry, Theoretical Mechanics, Mechanics of Materials, Fluid Mechanics, Electrical and Electronic Technology, Signal and Information Technology, Computer Application Basics, Engineering Economics, and Laws and Regulations.

In the afternoon session, it mainly tests candidates' mastery of professional theoretical knowledge directly related to geotechnical engineering, with 60 questions, each question is worth 2 points, divided into 9 subjects: civil engineering materials, engineering surveying, occupational regulations, civil engineering construction and management, engineering geology, structural mechanics, structural design, soil mechanics and foundation engineering, rock mass mechanics and rock mass engineering.

2. The professional scope of the professional knowledge examination includes: geotechnical engineering investigation, shallow foundation, deep foundation, foundation treatment, slope and foundation pit, special soil and poor geology, seismic resistance of construction engineering, and foundation detection. The professional knowledge test has 100 points in the morning and 100 points in the afternoon.

3. The professional scope of the professional case examination includes: geotechnical engineering investigation, shallow foundation, deep foundation, foundation treatment, slope and foundation pit, special soil and bad geology, construction engineering seismic resistance, and foundation detection. There are 25 questions in the morning and 50 in the afternoon, for a total of 100 points.

The Registered Geotechnical Engineer Examination is divided into a basic examination, a professional examination and a professional case examination, which is conducted over two days.

Day 1: The foundation exam is a closed-book exam.

The morning section mainly tests candidates' mastery of basic science, with 120 multiple-choice questions, each worth 1 point.

In the afternoon session, candidates will be tested on their mastery of the theoretical knowledge directly related to geotechnical engineering, with 60 questions and 2 points each.

Day 2: Professional Case Exam.

50 points in the morning and 50 points in the afternoon, with a total score of 100 points.

Basic science is divided into 11 subjects, including Advanced Mathematics, General Physics, General Chemistry, Theoretical Mechanics, Mechanics of Materials, Fluid Mechanics, Electrical and Electronic Technology, Signal and Information Technology, Fundamentals of Computer Applications, Engineering Economics, and Laws and Regulations.

The geotechnical engineering major is divided into 9 subjects, including civil engineering materials, engineering surveying, occupational regulations, civil engineering construction and management, engineering geology, structural mechanics, structural design, soil mechanics and foundation engineering, rock mass mechanics and rock mass engineering.

The professional scope of the professional examination includes geotechnical engineering investigation, shallow foundation, deep foundation, foundation treatment, slope and foundation pit, special soil and poor geology, seismic resistance of construction engineering, and foundation inspection.

Course content:The basic examination is a closed-book examination, the morning section mainly tests the candidates' mastery of basic science, with 120 multiple-choice questions, 1 point for each question, divided into 11 subjects: advanced mathematics, general physics, general chemistry, theoretical mechanics, material mechanics, fluid mechanics, electrical and electronic technology, signal and information technology, computer application foundation, engineering economics, laws and regulations, and the afternoon section mainly tests the candidates' mastery of professional theoretical knowledge directly related to geotechnical engineering, with 60 questions and 2 points per question. It is divided into 8 subjects: Civil Engineering Materials, Engineering Surveying, Civil Engineering Construction and Management, Engineering Geology, Structural Mechanics, Structural Design, Soil Mechanics and Foundation Engineering, Rock Mass Mechanics and Rock Mass Engineering.

The professional scope of the professional examination includes: engineering geology and hydrogeology, structural engineering and geotechnical engineering, with a total of 7 subjects in the morning section, 1. Geotechnical engineering investigation; 2. Shallow foundation; 3. Deep foundation; 4. Ground treatment; 5. Geostructure, slope, foundation pit and underground engineering; 6. Geotechnical engineering under special conditions; 7. ** Engineering. 1 homework question for each subject, 12 points, 4 subjects from these 7 subjects are selected for the exam, a total of 48 points.

In addition to the above subjects in the afternoon session, engineering economics and management subjects are added, each subject includes 8 multiple-choice questions, each question is worth 1 point, and 6 subjects are selected from these 8 subjects for the examination, with a total of 48 points.

Eligibility CriteriaThe examination is subject to national standards, and in the absence of national standards, industry standards are used. A total of 48 points.

1. Registered Civil Engineer (Geotechnical) Foundation Examination:

The total score in the morning and afternoon is 132 points (240 points in the test paper).

2. Registered Civil Engineer (Geotechnical) Professional Knowledge Examination:

The total score in the morning and afternoon is 120 points (the full score of the test paper is 200 points).

3. Registered Civil Engineer (Geotechnical) Professional Case Examination:

The total score in the morning and afternoon is 60 points (the full score of the test paper is 100 points).