-
Personal opinion: Layers 12 and 8 are good, see where your equipment layer is? Don't live in the equipment layer, there is a lot of trouble, the heating is not hot, the circuit is damaged, you have to go to this layer, the 18th floor I feel that it should be on the 9th floor, the heating in winter is generally from the top down (there are exceptions), the more you go to the bottom, the cooler, so the high-rise buildings are divided into two sections of heating, it should also be divided into equipment layers, so the heating on the 8th floor should be no problem, and the 12th floor will not be too cold.
There should be no problem with the lighting on the 12th floor, and the elevator will not be too tiring to climb if it is broken.
-
16 12 and 8 5 are OK, the height of the 10th floor is the ash layer, so it is not suitable for living, if it were me, I would choose the higher floor, for example, the view is wide, quieter, the problem of power outages is negligible, after all, the probability of power outages is very small.
-
Yes, 16 12 and 8 5 are OK, and the height of the 10th floor is the ash layer, so it is not suitable for living
-
It is advisable to avoid the dust layer, otherwise you will have to wipe the floor furniture 2 or 3 times a day.
The 17th floor is good, and one day the quilt you dry is dirty, you go to the 18th floor, it must be him. Hehe.
-
1st floor bar. Elevator fares don't...
If there is a power outage. Laughing people. It's all you.
-
Buy the top floor, my family lives on the 32nd floor of the top floor.
-
The teacher of the 5th floor personally thinks that under normal circumstances, it is better to choose a floor with more than 5 floors for an 18-story building, because it can ensure its safety and comfort, such as: 1. It can ensure its height from the ground, which can effectively prevent dust and pollution. 2. Quiet argument can effectively reduce the noise between floors, so that residents can get a quiet environment.
3. The height of the roof can better meet the vision of the residents, so that they can enjoy a wider sky and scenery. 4. It can better meet the safety needs of residents in case of emergency. 5. The higher the floor, the more privacy the occupants can get without being disturbed by the outside world.
-
Hello dear! The 18-storey building is better to choose 5-12 floors, and the 18th floor belongs to the high-rise, and it is generally better to choose the 5th to 12th floor, and the highest is not more than 15 floors. Because although the 15th floor is well lit, the wind and waves are greater when it rains, and once the power is out or the elevator is repaired, it is a headache to climb the building to imitate the curved ladder.
The lower floors are prone to dampness, especially in the south, where the city is very polluted and there are many mosquitoes in summer. In general, higher floors are preferred, so it is advisable to consider floors with more than 10 floors. If you are near a street house and the dust settles on more than 10 floors, you don't have to worry too much.
Because the degree of dust in the air is affected by moisture, the more water vapor there is, the lower it will be.
I bought an 18-story building, called a high-rise, if it is a 12-storey building, it is called a small high-rise, and the most expensive 18-story building is 17 floors!! Generally, the first 6 floors are 70-80 more expensive per floor, and after the 6th floor, each floor is the most expensive, and the 18th floor is cheaper than the 17th floor. Still have questions? >>>More
It is recommended to buy 1 3 --- 2 3 total floors, that is, between the 9th and 17th floors. >>>More
21st, 14th, 7th, 3rd floors.
The channel steel layer is built by a lot of channel steel, and the channel steel is a cross-section, which is a groove-shaped strip of steel. Its specification representation method, such as 120 53 5, represents a channel steel with a waist height of 120 mm and a leg width of 53 mm, and a channel steel with a waist thickness of 5 mm, or 12 channel steel. Channel steel is a carbon structural steel for construction and machinery, which is a section steel with complex cross-section, and its cross-sectional shape is groove-shaped. >>>More
21st, 14th, 7th, 3rd floors.
The channel steel layer is built by a lot of channel steel, and the channel steel is a cross-section, which is a groove-shaped strip of steel. Its specification representation method, such as 120 53 5, indicates a channel steel with a waist height of 120 mm and a leg width of 53 mm, and a channel steel with a waist thickness of 5 mm, or 12 channel steel. Channel steel is a carbon structural steel for construction and machinery, which is a section steel with complex cross-section, and its cross-sectional shape is groove-shaped. >>>More
An 18-storey building is a good choice, while a 10-storey building will have a greater advantage over the other two floors, and it is the best. Because of its better light and ventilation conditions in Feng Shui. >>>More