The computer can t be turned on, and a screen of English text appears, what should I do?

Press and hold the power button and don't move, and it will turn off after a while. For desktops, it is recommended to tighten the wire to prevent bad contact, press and hold the F8 key when the boot menu appears, select the last correct configuration, and enter to try. If it doesn't work, you restart it again, the menu appears to select the safe mode, enter the antivirus, 360 guard scanning, and after processing, restart to try.

I can't get into the reinstall system.

The following English appears when the device is turned on:

american megatrends

amibios(c)2005 american megatrends inc

p4m 890t-m2 release 04/06/2007

cpu:intel(r) pentium(r) 4 cpu

press f8 for bbs popup

512mb ok (ddr2:533mhz)

auto-detecting sec master．．cd/***rom

auto-detecting 3rd master．．ide hard disk

sec master:hl-dt-st***-rom gdr8164b ol06

uitra dma mode-2

3rd master:wdc wd1600js-22mhbo

uitra dma mode-6, capable and status ok

cmos checksum bad

press f1 to run setup

This is a very normal boot detection, that is, press F1 to start this because you turn on the floppy drive, go to the BIOS to turn it off.

Press the "Delete" key on startup to enter the BIOS:

1.Turn off the floppy drive.

standard cmos → drive a：none

2.Tell Windows 9X, ME no floppy drive.

advanced bios features →report no fdd for win 95：yes

3.Disable the floppy disk controller.

integrated peripherals→ onboard fdc controller：disabled

Tips: Among them, the first two items are required, as for the floppy disk controller, because there is no floppy drive, there is no need to open it. Even if you have a floppy drive, it is recommended to set "Report No FDD for Win 95" to yes so that the floppy drive will not be searched when Windows starts.

Note: Due to the large number of BIOS versions, the above options may be slightly different from what you actually see in your motherboard BIOS, but you can achieve this by turning off the "Floppy Drive A" and "Floppy Drive Seek" options.

The computer boot is full of English letters, indicating that the boot BIOS self-test has not passed, so the English letters will be displayed, the reason why the BIOS failed may be that a part is in poor contact or damaged, the BIOS is not detected, and it cannot be turned on smoothly.

It's all in English. Step 1.

Open the main chassis of the computer, unplug the memory, wipe the position of the gold finger, reinstall it in another slot, and test whether it can successfully pass the self-test.

Step two. Turn on the host to find the CMOS battery of the motherboard, buckle the battery, wait for about a minute, and then reinstall it.

Note: If there is a problem with the computer BIOS, discharging the CMOS battery and restoring it to factory settings can usually solve the problem.

Battery. Step 3.

Disconnect all external devices from the host, leaving only the "CPU" on the motherboard", "Memory", "Graphics Card", "Power Supply", and other parts including the motherboard jumper are disassembled, place the motherboard outside the case, use a screwdriver or coin-like metal, and short the motherboard power jumper switch to test whether it can pass the self-test.

Summary. If you can pass the BIOS self-test through the above steps, then it means that it is caused by a hardware poor contact, in other words, the problem still does not pass the BIOS self-test, which means that there is a problem or damage to the motherboard, and you can directly replace the motherboard.

The computer screen shows a row of English what is the reason why you can't turn on the phone, hello dear,!"If the system file is damaged or lost and the computer cannot be turned on, it may be caused by the use of reinstalled system tools, and finally it may be caused by the failure of the hard disk. Reason 1:

The computer can't turn on inexplicably. We will have some abnormal operations when using the computer, such as forcing the computer to power off and shutting down, accidentally disinfecting system files, or uninstalling key drivers. This will also occur when the system files are deleted.

Solution: In this case, we restart the computer and press F8 (keep tapping after booting), and then enter the "last correct configuration", or safe mode, uninstall the installed unknown software, drivers, etc. and re-enter the system, I hope it can help you! <>

It prompts you to "There is no device that can boot up, please insert the boot disk, and press any key to continue".

Solution:1Go into the BIOS and see if there are any errors in the system boot device settings. If you are using a hard disk boot system, see if the first boot device is a hard diskIf not, turn it to a hard disk

2.If it has been set up to boot the hard disk, consider whether the boot file of the operating system is corrupted or missing. If this is the case, boot the computer into the system disk and reinstall the system.

3.The hard drive is in poor contact or damaged.

Send out the English text on it or take a picture to send it out, so you can be sure.

Is it the absence of a hard disk or the system is missing files.

Take the desktop of Windows 10 as an example, the specific operation is as follows:

1. Browse all the content on the computer, find the option in the lower left corner of the main page of the computer, and then click to enter, then a window will appear, browse all the information in the window, and click the set up icon above the start button.

2. Once you're on the main page of the Set Up tab, browse through all the information on the page, find the Time and Language option, and click to enter.

3. Browse all the content information on the page in the main page of Time and Language, find and click on the option of Region and Language, and start to enter the language switch.

4. In the subsequent page, find the option of the language you need to use, and click the option of Chinese (People's Republic of China) in the language settings, so that the software information on the computer screen will change from English to Chinese.

What should I do if the computer is turned on in English, change it here in the computer, and you can easily solve the problem.