If the paint is painted more than twice, is the quality of the paint not good?

After the paint is brushed once, wait until the next day, that is, twelve hours later, and then brush it a second time, and you can't hold the brush together, because the wall is too wet and peeling off. No! According to the latex paint construction specifications, wait for the first time when the water is dry!

I'm doing it for the second time! Two times in a row, there is no guarantee for the construction quality of latex paint. Generally, it is enough to brush 2 times, and 3 times to brush it because there may be some unprocessed details in the second time, and it can be dealt with by painting it again.

The primer is the primer for the primer, the topcoat is the coating for the surface decoration, the morning light paint reminds the wall to paint the paint.

The topcoat is brushed twice, one is that the thickness of the paint film is thicker and not easy to damage, and the second is that the paint surface is brighter and more beautiful. For waterproofing projects, the most common in our family is the waterproofing of the bathroom. Under normal circumstances, the warranty period of waterproofing is only five years, so if we do waterproofing, we must try to do a good job, so as to ensure its long service life.

According to the requirements of the project construction, paint 2-3 times, the coating film is not less than the thickness, the height of the shower area is painted, the height of the pool area is painted, the wall at the ground is 30cm, and the height of the light wall can be brushed.

Waterproof project, is a very important decoration of the hidden project, the success or failure of the waterproof project, related to the loss of their own decoration and the harmony of the neighborhood downstairs, so many people are particularly concerned about how to operate the waterproof project to be safe。Based on the above situation, judging your actual needs is only to understand the problem of home improvement waterproof coating construction. Interior decoration does have clear requirements for the thickness of waterproof coatings, and the thickness of the paint should be met, and the brushing should be done two or three times, and the film can not be formed at one time.

Before the construction of waterproof coating, it is necessary to ensure that the ground and wall should be relatively smooth, there is no excess cement ash and delamination, and the sanitation should be cleaned up, and the surface can not have floating dust when the ground is wet with a mop, or sprinkled with a watering can, moist and can not have open water to see.

Personally, I don't think it's a quality problem, but more than two times can make the paint more firm, the color is deepened, and the paint is not easy to fall off, which is very strong.

No, no matter how good the paint is, it must be applied on both sides, one is to save the maintenance time in the later stage. The second is to make the coating better attached to the device.

It is not because the quality of the paint is not good, but because if you apply it more than twice, the paint will be applied more evenly and evenly.

No, because applying it twice can make the color more pure, more even, more beautiful, and more flat.

It's not that the quality is bad, but you need to brush a few more layers of this paint in order to better adhere to the wall and look better.

The paint should be brushed more than twice, not because the paint quality is not good, but to make the wall look more delicate and cover better, so it is only brushed twice.

In life, when decorating the house, you will find the decoration workers painting latex paint.

When you have to brush it more than twice, most of it is because the latex paint is directly brushed on the cement wall. If you paint it once, it will be difficult to achieve a change in the color of the room. When I brush it for the first time, the color is uneven, and it is still <>

The color of the surface of the cement mesh can be seen. When brushing for the second time, the overall color will become whiter, and a layer of latex paint will be added, so that a layer of latex paint is used to play a waterproof role.

Brush latex paintWhen looking at the decoration of the home, you will find that the latex paint master at home has to brush the paint more than three times, and it needs to be carefully polished after each brush. More often in order to see that there are cracks on the wall of the room, they need to be filled with latex paint, so that the whole wall looks whiter, and it needs to be polished with a brush. On the surface, brushing latex paint is a relatively simple job, but when you really do it, you will realize that you need to tilt your head up for a long time to brush the roof when brushing latex paint, resulting in a corresponding situation in the neck.

Latex paint needs to be brushed many times, and when applying the color of latex paint for the first time, most of them are to make the main body color first, and there will be a perfunctory coloring. The overall color is not uniform, and the second brush polishing will make the scene look whiter, and the polished wall will look smoother. After two coats of latex paint, the overall color is already present.

If you want to make the room waterproof, you also need to brush a layer of waterproof latex paint, which is for the purpose of preventing water seepage in the room. <>

In order to paint the color many times, because the latex paint is directly brushed on the cement wall, the overall color does not look particularly white, in order to make the room appear whiter. Therefore, brushing latex paint many times is just to present a better visual effect, and the choice of latex paint does not necessarily have to be white, white looks the most classic. However, white is also the easiest to get dirty in terms of care, so you can choose blue or grass green.

Because every time you brush the paint, it is a thin layer, so you need to brush it more than twice to be more uniform and more beautiful.

Because in this way, the color can be very uniform, and some color differences can also be avoided, and the effect is also very good.

Because it is easy to apply the paint uncleanly, and there is a high risk that the color will fade after applying it once, it is necessary to apply it at least twice.

In this way, the paint can be more uniform, and it can be well waterproof, and it can protect the inner layer of paint.

This is because this improves the sealing of the primer and allows the paint to penetrate evenly into the pores of the foundation.

The paint is brushed twice to close the pores of the base layer and prevent the cement from seeping out, usually the first layer is brushed with primer, and the second layer is brushed with topcoat, so the technical requirements are stricter.

Because if the paint is applied only once, it is easy to apply unevenly, so it needs to be applied at least twice.

Because this way the paint does not fall off, the paint can stay on the wall for a long time, and it will not fall off because the inside of the home is too wet.

In this way, the wall can be made a little smoother, and in this way, the color can be more beautiful, and there will be no uneven painting.

Because in the case of applying once, it is very likely that there will be some places that are not evenly coated, so the second time is also to make the paint more stable and have a better coloring effect.

The paint is applied more than twice mainly to achieve its due hiding power and surface performance. Because the hiding power of the paint is related to the thickness of the paint surface, more than two coats of paint can achieve the best decorative and protective effect.

We paint the walls twice when we paint them, and many of us may not know why. The first thing to do is the primer. is to strengthen the adhesion of the bass and tower jacket.

It can penetrate into the pores of the base layer and deeply embed the bottom layer. Creates a strong bond to the base, while having paint and good adhesion for inspiration. The primer can seal the pores of the base layer and prevent the alkali components in the cement from penetrating, resulting in the hair of the paint, which is often referred to as pan alkali, while reducing the amount of paint used.

Therefore, it must be painted, it must be evenly applied, no bottom, no leakage, uniform thickness, no oil, etc. The paint is directly on the outer layer, so the technical requirements for the construction of the paint are also relatively strict. When constructing, the arrangement of workers and the matching of time require a certain amount of skill, and in addition, when applying the second layer of paint, it is necessary to wait until the first layer of paint is dry before applying.

When painting, it should be formed at one time, not repaired, and the coating color should be consistent, the thickness should be uniform, the bottom should not be exposed, the bottom should not be exposed, the color should not be leaked, there should be no flow, no color, and the color separation should be distinct. For dark paints, don't add water as much as possible. If the ratio of water to the bucket wall paint is different, the paint color may not be consistent.

Paint is the final coating of paint, the last layer to be applied in the decoration of building walls, and the overall effect that appears after decoration is reflected through this layer. Therefore, the high requirements for the materials used should not only have good color and brightness, but also good pollution prevention, aging, moisture-proof, mildew-proof, polluted environment, safe and non-toxic, no fire hazard, convenient construction, coating drying speed, light and color, air permeability, etc.

It has a decorative and protective function, but also needs to resist harsh environments. The reason why the paint needs to be brushed twice is that the spray hood, bright light. It's easy for many owners to overlook the role of primers.

In fact, primers play a big role. Strengthens the adhesion of the foundation and paint. It penetrates into the pores of the foundation, forming a claw-shaped deep base that forms a strong bond with the base layer, while having paint and very good adhesion to act as an inheritance.

In order to prevent the alkali penetration of cement, close the pores of the base layer, make paint, and reduce the use of paint. So it must be painted, it must be applied evenly, without exposing the bottom, and not leaking. Thick, thin, uniform, no flow, etc.

The paint is directly on the outer layer, so the construction technical requirements for the paint are also very strict, the arrangement of the workers and the collocation of the time during the construction require certain skills, and the paint must wait until the first paint is dry. Moreover, when applying the second layer of paint, it should be shaped once, and it cannot be repaired, and the coating color is uniform, the thickness is uniform, and it is not exposed. According to the flatness of the cement surface, place the felt thing 1-3 times, first level the wall, then paint again after sanding, and finally paint the wall twice.

Note: It is best not to paint the interior wall latex more than 4 times. The paint film is too thick, the room humidity is too low, and the paint film is afraid of cracking.

After the base layer of the exterior wall is cleaned, mix the ground with double rain dew and cooked rubber powder. Then apply latex paint, polishing to apply 2 3 times.

This is because when you apply the paint for the second time, you want to make the paint more uniform and achieve the effect.

This will last longer, and it will also make the color look heavier without any fading, so it is usually brushed twice.

It is because the paint is not colored once, so it will be painted more than twice before its color will go up, and it will also make the ornamental particularly good.

The paint should be painted twice, and the above is afraid that the first reading material will not paint the wall well, and prevent the paint from falling off, affecting the appearance.

It is because it is impossible to achieve a good effect if you apply it once, you can only apply it twice, so that you can have a particularly good durability.

That's because that's the only way to be able to do the best foundation, and also to be the most perfect, and at the same time to have a better result.

Because this is how it can be painted, so that the house can be perfected and all imperfections can be covered.

This is also to play a role in the longer service life, brushing one layer is definitely not strong, so brushing two layers is also very good.

Because if you paint it once, the color of the wall of its sail shed will be very uneven. It will only make your wall more and more flowery the more you look at it. If you brush it a few more times, it will be more beautiful and richer in color, and there will be any flaws, and the entire wall will be several degrees white.

Because brushing the root of the root of the Min Kai Sui has no effect, and brushing it looks very uneven, will not cover the cement at the bottom of the wall, so only more than two times can you see that the fiber is very white.

Because the paint is brushed once, it is not particularly good to be pornographic and open to the picture, only by brushing it twice, so that it can play a role in the beauty of the early spike, and it can also make the face more full.

The main first pass is for coloring, the second pass is for checking and filling in the gaps, and it is also for re-changing some imperfections.

This is to make the final surface more flat, without blemishes, and it is more beautiful to apply twice, and the effect is also good.

Because the effect of brushing once is not very good, and the color is relatively light, it is usually brushed more than twice when brushing the paint.

Introduction: The problem of wall painting is actually very important for the whole home decoration, if the painting is not good, it is very easy to affect the beauty of the whole interior, and it will also affect the whole process of home decoration. Normally, if the background color of the wall is relatively light, the paint on the ceiling and the wall is generally brushed three times, if the background color is darker, but the paint color to be brushed is relatively light, it is necessary to brush several times according to the degree of coverage of the paint color, but it should be noted that it does not mean that the more color of the wall paint brush, the better, if the color of the brush is too much, it is easy to crack the skin.

In the process of painting the wall, you must first do a good job of preparation, you can first use newspaper to wrap the doors and windows of the home furniture, to avoid staining in the process of painting the wall, and also to make color before painting, so that the color can reach the best degree.

Paint color selection.

It is also necessary to pay attention to the choice of wall paint color, you can choose white, gray, blue, coffee and other light colors to match, like the color of the latex paint wall is generally used to match with light colors, the effect is very good, and it gives people a simple and bright sense of space. At the same time, you can also choose the color block to match, which will increase the color jump of the space and make the whole space look more vibrant.

Precautions for painting wall paint.

When painting the wall paint, you should first brush the primer, wait until the base paint is completely dry and then brush the top paint, generally starting from the ceiling and then to the wall, the wall paint needs to be brushed more than twice, the first time you need to add water, so that the wall can absorb the paint, wait until the first time is dry, and then brush the second time, the second time you can brush the paint without adding water, you can choose the way of brushing, which will be more delicate than the fine roller brush, you should first adjust the color before brushing, if there is an uneven color distributionAt the same time, you should also pay attention to the surrounding environment to avoid dust falling and affecting the brushing process, and try to ensure that the color is consistent.

In the end, I believe that many owners in the decoration of the house, the importance of paint painting is very important, if not well prepared, it will affect the overall decoration will cause the situation of falling, so we must pay more attention.