What position should the electrolytic capacitor 10 and 220uF hit in the universal meter?

The electrolytic capacitor is 10 volts 220 watts, which is now in the ammeter and should be in the position due south.

The universal meter is located at the current transformer position, keeping the power on and operating the display normally.

Hitting the 128 position is just right, not too much.

Electrolytic capacitor 10 volt 220 illegal in the position of the multimeter, you hit it to 50 bitter 500 illegal and this is fine.

When this program is used, the multimeter needs to be placed in a position where the resistance is infinite.

At this point, information about the capacitance voltage and current flow is detected.

ContentWell, 10 digits and 20 digits can reach his relative number on the relative number.

If your electrolytic capacitor is 10 volts, then when you move it, you must first make it more than 10 volts, and there must be a certain range of tolerance, so as to ensure that your range is accurate.

For a universal watch like this, you'd better be at 60% and not too high.

The beautician is 229, which is not yet in the middle of the universal meter.

In this case, you can turn the multimeter to the voltage level and measure the voltage of the capacitor.

For electrolytic capacitors, if we want to measure it, we must select the capacitance level on the multimeter, and its range must exceed 220.

In fact, he doesn't have to do this, it mainly depends on your own situation and your own store.

What position should the electrolytic capacitor model reach in the universal meter? It depends on how you operate, how much power you need, and what you need to achieve.

He has a certain industry operation standard, and he must find a professional to solve it, and don't do it himself, and then cause unnecessary losses.

In this case, you can make a choice directly in one of his backends, without asking.

The capacitance universal meter of five volts is screwed in what position is straight.

Where should the electrolytic capacitor reach in the universal meter, it can be directly hit to its center point.

The 100UF 220UF does not have this specification.

If it is 100V220UF, it is often used for switching power supply output filtering.

The role of SMD capacitors is mainly du

is cleared by the chip self.

The various high-DAO frequency signals generated by the body are cross-polluted to other chips, so that each chip module can work normally without interference. In high-frequency electronic oscillation circuits, chip capacitors and crystal oscillators and other components form an oscillation circuit to provide the required clock frequency for each circuit.

Answer: Hello dear: it means that it exceeds the range of the range.

That is, the capacitance you measure exceeds the maximum value that can be measured by the current gear of the multimeter. OL is actually an abbreviation for over level in English. I saw that the multimeter had an OL prompt, if it was a meter with several gears, it needed to be adjusted to a larger range and then re-measure the capacitance value.

It is worth noting that in addition to the overrange, there is also a situation where the capacitance to be measured is not put high and dry. Measuring in this case can easily damage the multimeter.

It needs to be avoided as much as possible!

Summary. Fluke digital multimeter, which shows "OL", is overrange; If you use automatic ranging (non-manual, there is generally a manual ranging function), the display of "ol" can be regarded as infinity. If the range is manual, if it is manual to 400k gear, the display of "ol" can only mean that the resistance value of the measured resistance is greater than 400k.

Fluke digital multimeter, which shows "OL", is overrange; If you use automatic ranging (non-manual, there is generally a manual ranging function), the display of "ol" can be regarded as infinity. If the manual measurement or dismantling is done, if the manual is to 400k gear, the display of "ol" can only mean that the resistance value of the resistance measured by the search is greater than 400k. Shirt leakage dates.

Can you elaborate on that a little bit more?

It appears on a certain level of resistance, indicating that the measured resistance is beyond the measurement range of this level. If the multimeter has been dialed to the maximum gear, the display of "ol" can be considered that the resistance value is very large, but it still cannot be understood as the infinite rise of the multimeter, but the multimeter can no longer measure the resistance value of this large resistance.