The gasoline chainsaw master is coming! The gasoline chainsaw can t add up the throttle, and the fir

The imported ** is too high, but the quality is excellent. There are a lot of domestic more than 1000 yuan, the old ones are too oil-intensive, some of the other domestic ones are not heat-resistant, high-temperature flameout, some are easy to pull the cylinder, there are many small problems, and the quality of the chain saw accessories determines the quality of the chain saw.

The chain saw should be well maintained when it finishes working.

Before the chain saw, the filter needs to be inspected, and the clean and qualified filter should be transparent and bright for sunlight observation, otherwise it is unqualified. When the filter of the chain saw is not clean enough, it should be cleaned and dried with hot soapy water. A clean filter is needed to ensure the normal use of the chain saw.

2.When the saw's teeth become non-sharp, you can use a special file to rest the sawtooth chain cutting teeth to ensure the sharpness of the sawtooth. At this time, it should be noted that when the file is frustrated, it should be frustrated along the direction of the cutting teeth, not reversed, and the angle of the file and the chain saw chain should not be too large, and it is appropriate to be 30 degrees.

3.Before using the chainsaw, the chain oil should be filled, which has the advantage of providing lubrication for the chainsaw, reducing the friction heat between the chainsaw chain and the chainsaw guide plate, protecting the guide plate, and also protecting the chainsaw chain from being scrapped prematurely.

4.When the chain saw is finished, it is also necessary to maintain the chain saw, so that the efficiency can be guaranteed when the chain saw is used next time. First of all, it is necessary to remove the impurities in the oil inlet hole at the root of the chain saw guide plate and the guide plate groove to ensure the smoothness of the oil inlet hole.

Secondly, the debris in the guide head should also be clear, and a few drops of engine oil should be added.

You steal the tree is the put.

Or are you going to be a chainsaw massacre???

The gasoline chainsaw can't add up the throttle and turns off as soon as it is added, which may be due to the following reasons Poor spark plug and excessive carbon deposit.

The carburetor oil supply is not smooth.

Air inlet air filter dirty blockage.

The damper is not reset after activation.

The carbon deposit at the exhaust port is blocked.

Check the oil circuit, caused by poor oil flow.

Generally, gasoline saws are driven by two-stroke gasoline engines and burn mixed oil (that is, a certain proportion of two-stroke gasoline oil is added to gasoline, and the instruction manual has requirements.) If you don't add oil, the engine is not lubricated, and the engine will burn, so it is absolutely not okay not to add oil.

"Alston Garden Machinery".

Chainsaw,"Gasoline chainsaws"or"Gasoline powered saws"Abbreviation. Power saws for logging and timber. Its sawing mechanism is a saw chain. The power part is a gasoline engine. Easy to carry and easy to operate.

The chain saw can be divided into: power part, circuit part, oil supply part and transmission part.

1. Power part: mainly composed of crankcase, crankcase bearing, crankshaft, cylinder, piston, piston ring, piston shaw, piston shaw needle roller bearing and other accessories;

2. Circuit part: mainly composed of flywheel, magneto, circuit switch, spark plug and other accessories;

3. Oil supply part: mainly composed of filter head, gasoline pipe, intake pipe, carburetor, intake pipe and other accessories;

4. Transmission part: mainly composed of clutch assembly, sprocket, guide plate, chain and other accessories.

Remove the side cover, dismantle ** [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello, just flip it with your hands. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

If it is caused by too many starts, as long as the spark plug is removed, the damper is pushed up, and the machine should be hollowed upside down. But if you keep flooding the tank, you have to change the carburetor.

Look at the pistons, rings for wear. New or old?

I can't tune it out. Let's get a new carburetor.

If the fuel concentration is not enough, it may be that the carburetor is blocked. Closing the damper can add oil, but it doesn't work. Clean the carburetor.

The smoke vent is clogged. Just clean it up.

Maybe it's the air intake pipe or something bad, it's a tire, and whether the gasoline filter is blocked when you start it, it's also going to turn off, you can go to the 4S shop to repair it, they should be able to find out right away, this problem shouldn't be difficult, they find out quickly.

Good after the end of the flow of the good milk after the separation of the good milk silently octave root monitoring.

Recommended uses, do you have a good movie, happy birthday nephew, love you, love you, why are you at home, and the beauty is still good at home.

After adding a team casually, answer the question directly, answer blindly, and divide 188

I know that the chain saw of the Eagle King brand produced by Hongying Garden Machinery can.