How to distinguish the real from the fake in the third generation of Apple headphones?

Steps for the third generation of Apple earphones to distinguish the real from the fake:

1. Observe the packaging box: First of all, Bai should observe the outer packaging of Du. When Zhizhi opened the box, there was a piece of scotch tape glued to the outside of the box.

The transparent lid of a fake is easy to open, while the top cover of a real fake takes a little effort to open. **The white chassis of the box is tightly attached to the transparent box and will not fall off when turned upside down.

2. Check the seams: Apple.

The whole piece molding process has been used for many years. With superior craftsmanship, there are no rough and jagged gaps across the entire surface of the headphones. Double-check these edge connections. If there is a significant gap, it may be fake.

3. Read the printed text: about 10cm away from the socket, there is a line of extremely small text. California.

There is a space between the assembly and the Chinese and the serial number DTX at the back. Check these two places and you'll see that the imitations are more or less empty.

4. Process of the line control department: the quality of the line control department has good technology, moderate clearance, and good key feedback.

5. Listening: Press the two vertical bars of the earphones with both hands, as shown in the figure. If the sound is weak and the bass is weak, this headphone is ** and vice versa. If the change isn't noticeable, try holding down the vertical bar on the top of the headphones. Or turn up the volume to make the changes more noticeable.

Identification of real and fake Apple third-generation headphones.

The method of distinguishing the authenticity of the three generations of Apple Bluetooth headsets is as follows:

1. Purchase channels: Through Apple's official website, Apple's direct sales *** These formal channels, the possibility of buying fake airpodspro3 is almost none, the risk of buying fakes through third-party channels is slightly higher, and the possibility of buying fakes through black intermediaries and small platforms is very high;

2. Outer packaging: After receiving the package, don't be in a hurry to open it, first look at the outer packaging, if the plastic packaging is not very fitting, there are bubbles, you can basically judge that it is a fake;

3. The outer packaging label of the outer packaging apples will be very neatly pasted, and the crooked ones are likely to be fakes;

4. Connection animation: There is not necessarily a connection animation, and there is no connection animation must not be;

5. Small icon: **There is only one earphone icon, and fakes will have a power icon;

6. Customization: **In the Bluetooth connection, you can customize the name and double-click action, but fakes do not have this function;

7. Battery: **The battery level of AirPodsPro3 will be displayed correctly, and the battery level of the fake cannot be displayed correctly, and it can only display 100% or 50%;

8. Workmanship: **The workmanship is very exquisite, the gap is almost invisible, the quality of the fake cannot be guaranteed due to the cost, the gap will be relatively large, and the reset button may also be prominent;

9. Indicator: **The brightness of the indicator light of the charging case is very low, and the indicator light of the fake is very bright and dazzling.

Purchase channels: Through Apple's official website, Apple's direct sales *** These formal channels, the possibility of buying fake AirPods Pro3 is almost non-existent.

2.Outer packaging: After receiving the package, don't be in a hurry to open it, first look at the outer packaging, if the plastic package is not very fitting, there are bubbles, you can basically judge that it is a fake;

3.Outer packaging label: The outer packaging label of apples** will be very neatly pasted, and it is likely to be a fake if it is crooked;

4.Connected animation: Those with connected animations are not necessarily **, and those without connected animations must not be **;

5.Small icons: **There is only one earphone icon, fakes will have a battery icon;

1. Check the outer box.

The outside of the box is sealed with a layer of tape, which is moderately viscous and clean and translucent. It takes a little force to open the box, and the connection between the box and the lid is tight, and it is not easy to fall off.

The transparent cover of the imitation has fallen off, it is very easy to open, the connection between the box and the lid is not tight, and it will be separated by gravity when inverted.

2. Check the headphones.

**The earphones are made of one-piece molding process, with excellent workmanship, and there should be no excessive gaps on the surface of the earphones, no scratches or other damages, and abrasions.

The counterfeit earphone has a slightly larger gap in the connection, and it can be broken by hand force, and the surface of the earphone is rough, or the gap can obviously open the problem is the imitation.

3. Text. **The headset has some small text at the jack, a space between california and assembled, and two between China and the serial number.

4. Sound. After the earphones are plugged in, you can use the air hole on the back of the earphone to test, if the air hole is blocked, the sound is muffled, and the bass is slightly shallow, then the earphone is **.

5. Fake AirPods can only display 50% or 100% power, and cannot display the power of the earphones one by one, you can only check the power of the two headphones together and the power of the earphone storage box, and the X will not appear in the upper right corner of the mobile phone in the Chinese version;

6. Since the essence of the copycat AirPods is an ordinary Bluetooth headset device, it is just disguised as AirPods, and the iOS system will recognize it as a Bluetooth headset, so the symbol of headphones = battery will be displayed on the status bar after connection, instead of genuine AirPods will display a headphone symbol alone.

Apple Bluetooth headset real and fake.

1. Fake AirPods can only display 50% or 100% power, and cannot display the power of the earphones one by one, you can only check the power of the two headphones together and the power of the headphone storage box, and the X will not appear in the upper right corner of the mobile phone in the Chinese version;

2. Since the essence of the copycat AirPods is an ordinary Bluetooth headset device, it is only disguised as AirPods, and the iOS system will recognize it as a Bluetooth headset, so the symbol of earphones = battery will be displayed on the status bar after connection, instead of genuine AirPods will display a headphone symbol alone;

3. In the negative screen battery widget of iOS, the left side of the fake AirPods is a Bluetooth icon, and **AirPods will display the power of the two earphones and the charging case respectively; And the P of some impersonated AirPods is not uppercase, but lowercase;

4. In terms of workmanship, you can also distinguish the difference between ** and cottage, ** AirPods and Apple's headphones are the same, they are all made of one-piece white plastic shell, there is no rough or even incompatible gap.

He has an anti-counterfeiting mark, you can check the top of the Bluetooth headset he buys and it has an anti-counterfeiting mark, you can scan the code to identify its authenticity or connect your device, and then you can find the Bluetooth device you are currently connected to on the computer, whether your device is official or not. Actually.

First, the box.

The first thing to do is to look at the outer packaging you buy. When opening the box, there is a transparent tape sticking to the outside of the box, and the tape should be clean and sticky, without traces of repeated pasting.

The transparent lid of the imitation is very easy to open, while the ** one requires a little force to open. **The white chassis of the box and the transparent box are very tightly connected, and they will not fall off when turned upside down.

Please click Enter a description.

Second, check the seams.

Apple has adopted a one-piece molding process many years ago, coupled with excellent workmanship, the entire surface of the earbuds is absolutely free of rough, or even incompatible gaps. Double-check the following edge joints, if there are such gaps, you may have bought an imitation

Please click Enter a description.

Please click Enter a description.

3. Look at the text.

About 10 cm away from the socket, there is a line of extremely small text (be careful not to stare at it for too long when observing, as it may damage your eyesight). There is a space between the words "california" and "assembled", in China and the serial number "dtx." after itThere are two spaces. If you check these two places, you will find that the imitation is more or less empty.

Please click Enter a description.

Fourth, listen to it.

The most important thing about headphones is listening, but if you don't have an ear like an audiophile, try this simple method. EarPods, plug the headphones into your iPhone5, and feel free to **one**.

Please click Enter a description.

Press and hold the two vertical headphone jacks shown in the picture with both hands, if you find that the sound is muffled, the bass is weakened, and you feel that the sound is in the front, or it becomes less thick, then this earphone is **, otherwise it is an imitation. If you don't notice noticeable changes, you can try it again by pressing and holding the vertical bar jack on the top of the head. Or turn up the volume to make this change more noticeable.

Please click Enter a description.

This is because the unique design of the air holes of the EarPods follows the specifications of fluid mechanics, with the back air holes used to stabilize the sound and the lower two air holes used to enhance the bass in the cavity. For copycat manufacturers, it is just two holes in imitation of the shape, and of course there is no effect on covering it with your hands.

The third generation of Apple earphones needs to listen to the sound quality, look at the details, and look at the packaging, after all, they all need to be carefully identified. Especially the sound quality.

It's all about actually listening.

If the third generation of Apple earphones distinguishes the real from the fake, this is particularly simple, and this is his serial number, which you can check on the official website, or check it for you in the physical store.

In this case, I suggest that you can directly identify his specific situation, and in general, there is no problem at all according to his security mark and his barcode.

If you want to distinguish the authenticity of Apple's headphones, you must first look at its workmanship, then its sound quality, and the relevant bills of your purchase channel itself.

You can compare their authenticity from the **, generally speaking, the fake ** is very cheap, and the real thing is very expensive.

As long as it is purchased on **, the official ***, or the official **, it is basically true and very few fake.

You can go through something, so it's okay, it's easy to recognize.

How to distinguish the real from the fake in the third generation of Apple headphones, and I haven't used any Apple mobile phones, what kind of headphones have not taken me?

The main way is to look at its workmanship, and then see if there are some iconic symbols at each interface.

You can also check the anti-counterfeiting verification code after the device is in hand, and whether the official website can check it.

1. Inquire about the serial number of the product.

2. The indicator light of the earphone compartment is really small.

3. Open the font inside the headphone compartment, the real words are smaller and more clear and delicate.

4. The gap on the back of the headphone compartment is really more uniform.

5. After connecting the mobile phone, identify it through icould.

Steps for the third generation of Apple earphones to distinguish the real from the fake:

1. Observe the packaging box: First of all, Bai should observe the outer packaging of Du. When the box is opened, there is a piece of scotch tape on the outside of the box.

The transparent lid of a fake is easy to open, whereas the top lid of a real fake takes a little effort to open. **The white chassis of the box is tightly attached to the transparent box and will not be poured.

2. Check the seams: Apple has been using the entire molding process for years. With superior craftsmanship, there are no rough and uneven gaps across the entire surface of the headphones. Double-check these edge connections. If there is a significant gap, it may be false.

3. Read the printed text: a small line of text about 10 cm away from the socket. There is a space between California and assembly, and there is a space between China and the serial number dtx at the back. Checking both places, you will find that the copy is more or less empty.

4. Wire control process: *** wire control process, moderate clearance, good key feedback.

5. Listening: Press the two vertical bars of the earphones with both hands, as shown. If the sound is weak and the bass is weak, the headphones are real and vice versa. If the change isn't noticeable, try holding down the vertical bar on the top of the headphones. Or turn up the volume to make the changes more noticeable.

How to distinguish the real from the fake in the third generation of Apple headphones? This directly means that he has a serial number, and then you can directly distinguish the real from the fake by checking it on the official website of Apple.

Because it is generally more difficult to be true or false, there should be an anti-counterfeiting mark or something like that.

If you want to distinguish the authenticity of the third generation of Apple earphones, you can calmly distinguish the workmanship and packaging of the earphones, and you can also check its serial number.