Huawei P30 how to scroll to take a long screen

Updated on technology 2024-08-09
11 answers
  1. Anonymous users2024-02-15

    Method 1: Open the interface where you need to take a long screenshot, and then press and hold the power button and the volume down button of your Huawei P30 phone at the same time, then the screen will appear on the phone interface.

    Then find the [Scroll Screenshot] option at the bottom of the interface interface, and click it, then the interface of the phone will scroll down and take a screenshot, if you still need to take a long screenshot, continue to click [Scroll Screenshot] until you capture all the interfaces you want to screenshot.

    Method 2: Open the interface where you want to take a long screenshot, then tap the phone screen with one knuckle on the screen of the phone, and draw an "S" on the screen without leaving the screen with the knuckles.

    Then, the phone will enter the scrolling screenshot, scroll to the interface you want to capture, click on the screen of the phone, you can complete the operation of the long screenshot, and save the screenshot.

  2. Anonymous users2024-02-14

    The Huawei P30 can scroll through the truncated chart using knuckle gestures.

    1. Tap the screen with one knuckle and keep the knuckles from leaving the screen, draw "S" a little harder, and the screen will automatically scroll down to take a screenshot.

    2. During scrolling, click the scrolling area to stop taking a screenshot.

  3. Anonymous users2024-02-13

    1.Pull down the taskbar and click the "Screenshot" icon.

    2.Press and hold the volume down button and the power off button at the same time to take a screenshot to enable smart screenshots in gesture control.

    3.After mastering the screenshot method, click to scroll to take a screenshot, tilt the phone down, and select the area to take a screenshot to complete the long screen.

  4. Anonymous users2024-02-12

    Summary. This situation is because when we scroll the screen to take a screenshot, the maximum range of space it captures is limited, when we can only take half of the phone screen after normal operation, this is also due to the fact that the system background may be cached The device runs too much data, and it can't run normally, it is best to close it and restart, we try to clean up some memory space data again, and use the screenshot function again.

    Hello, taking the EMUI system version as an example, the method of taking a screenshot for P30 is as follows: 1. Enter the mobile phone settings; 2. Click "Accessibility"; 3. Click "Gesture Control"; 4. Open the "Smart Screenshot" in the "Knuckle Hand Land Selling Potential"; 5. Use your knuckles to tap the screen and draw a closed pattern to take a screenshot of the corresponding area.

    Some of them are incomplete.

    In the middle. This situation is because when we scroll the screen to take a screenshot, the maximum range of space it intercepts is limited, when we can only take a screenshot of half of the mobile phone screen after normal operation, this is also due to the fact that the system background may be cached The device runs too much data, and it can't run normally, it is best to restart after shutting down, we try to clean up some memory space data again, and use the screenshot function again.

  5. Anonymous users2024-02-11

    Summary. Dear, the following is the information for you to expand, Huawei P30: Huawei P30 is a smartphone released by Huawei on March 26, 2019 at 21 o'clock in the evening of Beijing time, at the Paris Exhibition and Convention Center in France.

    The front of the Huawei P30 adopts the design of an inch waterdrop screen, with a higher screen-to-body ratio; The back shell continues the design of the P20 series gradient color, with colors such as red tea orange, sky realm, aurora, bright black, and pearlescent mother-of-pearl; The width of the machine is mm, the length is mm, the thickness is mm, and the weight is about 165 grams. The Huawei P30 rear camera adopts a Leica triple camera design. It is powered by a Kirin 980 processor, an EMUI operating system based on Android 9, and a built-in 3650 mAh non-removable battery.

    After taking a screenshot in the usual way, click to open it. 2. Click to scroll to take a screenshot. Find the "Scroll to Take a Screenshot" option in the bottom right corner of the page and click on it.

    3. Scroll to take a screenshot. Scroll the screen according to your needs and take a long screenshot.

    Shinma 1Tap the screen with one knuckle and keep the knuckles open and keep the screen open, draw the "s" a little harder, and the screen will automatically scroll down to take a screenshot. 2.

    During scrolling, tap the scrolling area to stop taking a screenshot.

    Dear, the following is the information for you to expand, Huawei P30: Huawei P30 is a smartphone released by Huawei on March 26, 2019 at 21 o'clock in the evening of Beijing time, at the Paris Exhibition and Convention Center in France. The front of the Huawei P30 adopts the design of an inch waterdrop screen, with a higher screen-to-body ratio; The back shell continues the design of the P20 series gradient color, and the colors include red tea core imitation sock orange, sky realm, aurora color, bright black, pearlescent mother-of-pearl; The width of the machine is mm, the length is mm, the thickness is mm, and the weight is about 165 grams.

    The Huawei P30 rear camera adopts a Leica triple camera design. It is equipped with a Kirin 980 processor, an Android 9-based EMUI operating system, and a built-in 3650 mAh non-removable battery.

  6. Anonymous users2024-02-10

    Huawei P30 mobile phone has three methods of screenshot square collapse, and the operation steps are as follows:

    Method 1: Press and hold the power button and the volume button at the same time to take a screenshot quickly.

    Method 2: Swipe down from the top of the screen to clear the control center, and tap the screenshot icon to take a screenshot.

    Method 3: Tap the screen with your knuckles to take a screenshot.

  7. Anonymous users2024-02-09

    1. First, unlock your Huawei phone and open the page you want to screenshot, such as a web page.

    2. Use your finger joints to tap the screen hard, and keep in touch with the screen to draw the letters s to start scrolling and taking screenshots.

    3. After starting scrolling to take a screenshot, the system will automatically scroll the screen page to take a screenshot.

    4. If you have captured the required screen area, you can click the screen to stop scrolling.

    Prerequisites: 1. To achieve scrolling screenshot operation, you need to turn on the smart screenshot function on your mobile phone. The steps to get started are as follows:

    2. Find and tap the "Settings" option on your phone's desktop.

    3. In the settings page that opens, swipe the page to find the "Smart Assist" option, and click to enter.

    4. On the intelligent assistance page that opens, click the "Gesture Control" option to enter the next step.

    5. Find the "Smart Screenshot" option, click to enter, and turn on the "Smart Screenshot" function. This way, you can use the scrolling screenshot.

  8. Anonymous users2024-02-08

    Hello, dear. Your question: How to scroll the screenshot of a long picture on a Huawei phone, as follows: 1. Swipe out the notification panel from the status bar at the top of the screen, continue to scroll down to bring up the entire menu, and click the "Screenshot icon" to take a screenshot of the full screen.

    When the screenshot is complete, a thumbnail will appear in the bottom left corner. You can: 1. Swipe down the thumbnail to continue scrolling to take a screenshot.

    2. Swipe up on the thumbnail and select a sharing method to quickly share the screenshot with your friends. 3. Click on the thumbnail to delete the screenshot. The Interceptor Screen is saved in the gallery by default.

    and Lu. 2. Use knuckle gestures to scroll truncated Figure 1, tap the screen with one knuckle and keep the knuckles from leaving the screen, draw "s" a little harder, and the screen will automatically scroll down to take a screenshot. 2. During scrolling, click the scrolling area to stop taking a screenshot.

  9. Anonymous users2024-02-07

    Take Huawei P40 mobile phone as an example: 1. Swipe out the notification panel from the status bar at the top of the screen, continue to slide down the entire menu, and click the "Screenshot icon" to take a screenshot of the full screen. When the screenshot is complete, a thumbnail will appear in the bottom left corner.

    You can: 1. Swipe the thumbnail downward, which can be wide and collapsed to continue scrolling to take a long screenshot. 2. Swipe up on the thumbnail and select a sharing method to quickly share the screenshot with your friends.

    3. Click on the thumbnail to delete the screenshot. Screenshots**By default, they are saved in the gallery. 2. Use knuckle gestures to scroll in a circle Figure 1, tap the screen with one knuckle and keep the knuckles from leaving the screen, draw "s" a little harder, and the screen will automatically scroll down to take a screenshot.

    2. During scrolling, click the scrolling area to stop taking a screenshot.

  10. Anonymous users2024-02-06

    Here's how:Tool: Huawei Honor 80, screenshot.

    1. First of all, you need to find and click on the "Settings" option on your phone's desktop.

    2. In the open skinning page, slide the page to find the "Intelligent Assistance" option, and click to enter.

    3. On the open intelligent assistance page, click the "Gesture Control Burning Spring" option to enter the next step.

    4. Find the "Smart Screenshot" option and click to enter the smile.

    5. Turn on the "Smart Screenshot" function. This way, you can use the scrolling screenshot.

    6. Finally, tap the screen firmly with the finger joints, and keep in contact with the screen to draw the letters s to start scrolling and taking a screenshot. After you enable scrolling to take screenshots, the system automatically scrolls the screen page to take screenshots.

  11. Anonymous users2024-02-05

    Here's how to scroll through the screenshot of a Huawei phone:

    Tool Raw material: Huawei P50, .

    1. Open the home screen of your HUAWEI phone, select the interface you want to scroll through, and press the phone's audio and power button at the same time to take a screenshot.

    2. Open the screenshot thumbnail in the lower left corner, and click the scroll screenshot in the lower right corner of the page.

    3. Flip the page up with your finger to take a screenshot, flip to the bottom of the page, you can take a long screenshot successfully, and click the save icon above after successfully taking a long screenshot.

    Huawei mobile phone external evaluation:

    Huawei nova 2s has a high praise rate of 99% on Huawei JD.com, a 100% praise rate on Huawei, and a high score on Huawei Tmall. The mobile phone's super high appearance and anti-sky photo function have harvested a large number of users, and the high-sex stool attack can make the favorability of this mobile phone rub off**. According to the survey of zol mobile phone users, more than sixty percent of users said that they were more interested in the appearance of 6-inch full screen and double-sided glass, followed by the design of dual cameras after the front width and thick rise.

    A separate HiFi chip, a large speaker, and a face unlock feature followed. <>

Related questions
13 answers2024-08-09

If you want to cast**,In some apps such as iQiyi,Tencent**,He has a screen projection button,As long as your mobile phone is connected to the TV or the box under the same wifi,It can be cast。

7 answers2024-08-09

Use the shortcut switch to scroll through the screenshot: Swipe down from the status bar to open the notification panel, tap <> >>>More

23 answers2024-08-09

First of all, I want to remind you that this function is actually turned on by default, called knuckle screenshot, and you can quickly double-click the screen with your knuckles. The P30 also supports this feature. >>>More

8 answers2024-08-09

1、Find miracast on the TV desktop,Or find and click to open the miracast option in the system settings,2、Miracast will appear on the TV screen waiting for the connection status,Check the box in the following figure"Device name",3、Next, operate on the mobile phone,Pull down the notification bar from the top of the mobile phone screen,Click【Wireless projection】,4、Click on the pop-up option box to select the TV device name seen in step 2,Finally, click on the TV"Accept" You can realize wireless screen projection. >>>More

17 answers2024-08-09

1. The following scenarios consume power quickly.

2. Running a large number of applications in the background will make the power consumption more serious. >>>More