The size of the gate is the most auspicious size, and the size of the gate is the best

The following are auspicious sizes, and the gate is in line with the three talents of heaven, earth and man.

It can be applied to all aspects of indoor layout.

1 inch (cm) is Luban ruler.

"Cai";

6 inches (cm) is "righteousness";

1 shaku 6 inches (cm) is "wealth".

2 feet 1 inch (cm) is "righteousness".

2 feet 8 inches (cm) is "auspicious".

3 feet 6 inches (cm) is "righteousness".

5 feet 6 inches (cm) is "auspicious".

7 feet 1 inch (cm) is "auspicious".

7 feet 8 inches (cm) is "righteousness".

8 feet and 8 inches (cm) is "auspicious".

1 zhang 1 inch (cm) is "wealth".

Small single doors should be opened 2 feet 1 inch:

That is, centimeters are "righteous gates".

A single door should be opened 2 feet 8 inches:

i.e. centimeters for "Jimen".

The small double door should be opened 4 feet 3 inches 1 minute: that is, the centimeter is "Jimen".

Double doors should be 4 feet 3 inches 8 minutes:

That is, the centimeter is the "wealth gate".

The large double door should be opened 5 feet 6 inches and 6 minutes: that is, the centimeter is "Jimen".

The Gate of Wealth or Righteousness:

1. Width 1470High 1910

2, width 1547High 2180

What is the difference between the "original" position and the "wealth" position on the Luban ruler.

1. Luban ruler is also known as class ruler, door ruler, door light ruler, and eight-character ruler. Luban ruler belongs to the traditional Chinese construction ruler, which is used to control the size of furniture and residences. As a result of the control of the Luban ruler, the resonance band of the secondary wave is just avoided.

When decorating your home and buying furniture, measure it with a Luban ruler and try to choose an auspicious size. In fact, this "Luban ruler" is not a "ruler", but a comparison table.

1 Luban ruler = city ruler = centimeter;

Typically, the unit of length.

There is a "carry system."

Target; For example: 1 city ruler = 10 inches, 1 inch = 10 minutes, that is, this is a 10-base system. However, the "Luban ruler" does not have a "carry system", and only the text marks the good and the bad. The first row of eight characters is "1 wealth, 2 diseases, 3 separations, 4 righteousness, 5 officials, 6 calamities, 7 harms, and 8 books".

Second, the use of Luban ruler:

1. Judgment of good luck and evil: curved ruler, length 10 city inches, that is, 1 city ruler; Each inch is marked with color, namely: one white, two black, three green, four blue, five yellow, six white, seven red, eight white, nine purple; Based on inches, one inch, six inches, and eight inches are auspicious; To put it in layman's terms, the size of the door should fall on one inch, six inches, and eight inches, so that it is a good door.

2. The Luban ruler is used in conjunction with the curved ruler: the Luban ruler sold on the market is marked with red and black, and the required length falls on the "red" of the Luban ruler, which is auspicious. Then measure it with a curved ruler, and if the required length is placed on the curved ruler "white (one white, six white, eight white)", it is auspicious.

Is 1470 edging or gate emptiness?

The standard dimensions of the general gate are as follows:1. The size of the door of the ordinary house.

Generally, the standard size of the gate of an ordinary house is around the right.

2. The size of the door of the commercial house.

Generally, the width of the single-door door of the commercial house is between; The width of the double door is left and right.

3. The size of the villa gate.

Generally, the gate size of the villa has and both.

Types of doors. 1. Wooden door.

In people's daily life, wooden door is a very common kind of door, the advantages of wooden door are: easy processing, more light blocking, with good thermal insulation performance, but the wooden door is more prone to deformation in the process of use.

2. Steel door.

The door of this material is mainly made of steel, this kind of door has advantages and disadvantages, the advantage is the solidity of the property, it is also relatively cheap, and it can also be fireproof, and the disadvantage is that it is easy to rust and not easy to maintain.

3. Stainless steel door.

The door of this material is made of stainless steel, the door of this material is very strong, and the appearance is more beautiful, that is, it will be more expensive.

Gate Size:1. The size of the gate of the ordinary house: the standard size of the gate of the general ordinary house is around the right.

2. The size of the door of the commercial house: the width of the single door of the general commercial house is between; The width of the double door is left and right.

3. Villa gate size: Generally, the gate size of villas has these two types.

Villa entrance door standard sizeGenerally, villas will have two gates, one is the courtyard gate and the other is the entrance door; The width of the courtyard gate is generally about meters, at least for vehicles to enter and exit; Of course, the width of the villa courtyard gate should be determined according to the area of the house and the building structure, and some courtyards have a large area, and the width of the villa gate can reach 3 meters or 4 meters. There is no height limit. There are currently two most commonly used sizes for villa entrance doors, meters and meters.

The size of an ordinary gate is generally about one meter by one meter.

The minimum thickness of the door opening wall is not less than 80. The strength of the low and 80mm size door frame is not very large, and the support for the door is not enough. If it is less than 80mm, the thickness of the wall needs to be thickened to more than 80mm.

When there is a protruding beam above the door opening, the upper door sleeve line cannot be installed. It is also necessary to make a 50-60mm high fake wall with blockboard, the length of which is the same as the width of the opening, and the depth is the same as the thickness of the opening.

Measurement method: Description: For the measurement of the door opening, the following door opening is the size of the door opening that has been renovated and is no longer modified. For door openings that are still in the process of renovation, it is recommended to make a door opening with a height of 2050mm and a width of 860mm.

According to this size of the door opening, the finished door is produced and the display effect is the best. is ergonomic and aesthetically pleasing.

How to measure the size of the door opening:

1. Actually measure the width and height of the door opening. To measure whether the upper, middle and lower three places of the door hole are consistent, if inconsistent, the narrowest place shall prevail, but the error shall not exceed 20.

2. For the error of more than 20mm, the wall hole should be corrected, and the correction can be corrected with cement mortar or lime.

1.First of all, the size of the gate should be proportional to the house.

1) Taking the Luban ruler as the standard ruler is a very auspicious number.

2), the size of the gate to take the height of the number of days 3 and 9 is better, so the height is the best meter, the width is the number of ground, and the rice is the best.

3) The door is the façade of a home, it should be new and not old, if it is damaged, it should be replaced immediately.

2.The auspicious size of the gate in the Luban Sutra.

1) The auspicious size of the small single door is two feet and one inch, that is, the centimeter is the righteous door.

2), the size of a single door is two feet eight inches, that is, centimeters, for the auspicious door.

3), the size of the small double door is four feet three inches and one minute, that is, centimeters, for the auspicious door.

4), the auspicious size of the double door is four feet three inches and eight minutes, that is, centimeters, for the financial door.

5), the size of the large double door is five feet six inches and six minutes, that is, centimeters, for the auspicious door.

3.The auspicious size of the gate in "Shilin Guangji".

1), the door one inch (centimeter) for the Luban ruler in the "wealth".

2) The six inches (cm) of the gate is "righteousness".

3), the door of one foot six inches (cm) for "wealth".

4) The door is two feet and one inch (centimeter) for "righteousness".

5), the gate of two feet eight inches (cm) for "auspicious".

6), the gate of three feet six inches (cm) for "righteousness".

7), the gate of five feet six inches (cm) for "auspicious".

8), the gate of seven feet one inch (centimeter) for "auspicious".

9), the gate of seven feet eight inches (cm) for "righteousness".

10), the gate of eight feet eight inches (cm) for "auspicious".

11), the gate of one zhang and one inch (cm) for "wealth".

Luban ruler Daji size table].

Cai, Caide: Golden Boy: Liuhe:

Yingfu: Righteousness, Tianding:

Yili: Guizi:

Daji: Official, Shunke:

The size of the door is generally normal, and the width of the single entrance door is between 700mm-1000mm; The width of the bi-split entrance door (middle door) is between 1500mm and 2000mm.

The mother-son door is named because its two doors are designed to be one large and one small, as if a mother is supporting her young son. Generally, if the width of the opening of the entrance door of the house is between 1200mm and 1500mm, it will be used as a mother and son door. The size and width ratio of the mother and son door is generally 1 to 2, assuming that the width of an entrance door opening is 1200mm, the size ratio of the door is as follows

The width of the mother fan is 800 mm, and the width of the child fan is 400 mm.

Miscellaneous

Because the width of the single-opening entrance door exceeds 1000mm, it will cause a large load to the door shaft and is easy to deform when used; It is also more laborious to open and close the door, and the space taken up by the door is also larger.

In addition to solving the above problems, it also makes the entrance door more atmospheric and beautiful. When there are large objects such as furniture or more people, frequent entry and exit, you can hit the double door at the same time.

1.If it is the entrance door of the villa, then there are generally two sizes, one is one meter two times two meters five, and the other is one meter five times three meters.

2.If it is the entrance door of the commercial house, and it belongs to the mother and son door, then the size is generally one meter two times two meters. If it is an ordinary single door, then the size is generally 95 centimeters by 2 meters.

1. The size of the door of the ordinary house.

The size of the door of the ordinary house is generally around the right, basically in accordance with the specifications of the finished door products that have been done on the market, which directly reduces the decoration troubles and burdens for the decoration owners, otherwise the residential users also need to customize according to the size of the door at home, which is very troublesome and costly.

2. The size of the door of the commercial house.

Generally speaking, the standard size height of the door of the commercial house is fixed, and there will be no obvious difference, but the width of the door will vary due to the difference between single door and double door. Generally, the width of a single door of a commercial house is about or so; The width of the double door fluctuates up and down.

3. The size of the villa gate.

In the villa, in addition to the entrance door, there is also a courtyard gate, so the dimensions of the two gates need to be measured during the renovation process. Generally speaking, the height of the courtyard gate of the villa is about the same, and its width can be determined according to the structure of the villa itself; The size of the entrance door of the villa is generally common and these two.

The height of the door for people to pass is generally not less than 2m, and no matter how high it is, it should not be exceeded, otherwise there is a sense of hollowness, and the door leaf production needs to be particularly strengthened. If modeling, ventilation and lighting are needed, waist windows can be added to the door, and their height should be from the beginning, but it should not be too high. The door for vehicles or equipment to pass through should be determined according to the specific situation, and its height should be higher than that of the vehicle or equipment, so as to avoid collision with the door frame when the vehicle needs to be transported due to bumps or equipment.

As for the clearance requirements for all types of vehicles, it is necessary to consult the corresponding specifications. In general, the house is divided into doors, room doors, kitchen doors, and bathroom doors, and the upper size is now taken in consideration of the entry of modern furniture. The door width of public buildings is generally 1m for a single door, and the width of the double door should be considered for the production of the door leaf, and the width of the door leaf of the double door or multiple doors is appropriate.

The width of the gate for safe evacuation should be set according to the calculation and specification (relevant fire code).

Ask how much size the door leaf is.

1.Door height The height of the door in the house is usually not less than 2 meters, and the height of the house is not suitable to exceed the meter, otherwise there will be a sense of hollowness, and the door construction needs to be particularly strengthened. Such as modeling, ventilation.

2.Door width Usually the width of the door is from meters to meters, the width of the kitchen door is about meters, and the width of the bathroom door is from meters to meters. 3.

The size of the door The door here refers to the first door into the living room. The gate is the "façade" of the whole family; Pay attention to the generosity and decency, the size of the gate is generally designed to be wide meters * high.

Question: The door leaf is 2 meters and 4 double leaves.

Ask questions. Door cabinet 2 meters 82 door leaf 2 meters 40, with window door 42 cm is always 1 to 82 2 meters 82 after measuring the size of the width plus the size of the sliding door frame Finally, calculate the square number and ask yes, I hope it can help you, dear