-
1. Don't wax the new car arbitrarily. It is not enough for someone to buy a new car and wax it. Because the paint layer of the new car itself has a layer of covering wax, premature waxing will remove the original wax from the appearance of the new car, resulting in unnecessary waste, as usual, there is no need to rush to wax within five months of the purchase of the new car.
2. Master the waxing frequency. Due to the difference in the environment and parking place of the vehicle, the time isolation of waxing should also be different. Vehicles that are usually parked in a garage and drive on good trails should be waxed every 3-4 months; For vehicles parked in the open air, it is best to wax every 2-3 months due to wind and rain.
Although this is not a hard demarcation, it is normal to touch the body with your hands and think it is not smooth, you can wax it again.
3. Before waxing, it is best to wash the dirt and dust on the exterior of the body with car wash water. Keep in mind that dish soap and pancreatic water should not be used blindly, so the sodium chloride factor contained in it will erode the body paint layer, wax film and rubber parts, causing the car paint to lose its luster and the rubber parts to deteriorate. If there is no special car wash water, you can use clean water to wash the vehicle, wipe the car body dry and then wax.
4. The car should be waxed in a cool place to ensure that the car body does not heat up. Because as the temperature rises, the adhesion of the wax becomes poor, which will affect the waxing quality.
5. When waxing, apply an appropriate amount of car wax with a sponge block, and apply it in a straight line on the car body. (too fine: it is best to accept straight line coating for outdoor waxing, and circle coating for indoor waxing) one operation should be completed continuously, and the coating should not be stopped; As usual, after the wax layer is evenly applied, wipe it with a new towel for 5 10min, but the quick wax should be wiped while applying.
6. After the body is waxed, some car wax will remain in the loopholes in the lights, license plates, doors and luggage compartments, etc., making the body look very unelegant. If the wax dirt in these places is not wiped off in time, it is likely to breed rust. Therefore, after waxing, the wax scale must be thoroughly cleaned, so that the perfect waxing results can be obtained.
-
Tool raw material: high-pressure water gun.
If this condition is possible, you can use a multi-functional bucket, and now there are multi-functional buckets, which is also more convenient.
Car wax. Try to choose a car wax that can be done at one time, such as E8 wax, platinum wax, extreme wax and so on.
Sponge. Try to stock up on a couple of waxing sponges, a large car wash sponge.
Towel. Spare a few more pieces to wipe the car.
Car wash powder (water).
Clean the car before waxing and put some water in it.
Other. Others, such as coral car wax, have asphalt to remove scratches before waxing, and should be treated with scratch wax, asphalt detergent, magic mud, etc.
1.Car washing. In order to ensure the waxing effect, the vehicle must be thoroughly cleaned before waxing.
2.Waxing. Waxing can be divided into manual waxing and mechanical waxing, manual waxing is simple and easy, mechanical waxing efficiency is high.
Whether waxed by hand or mechanically, it is important to ensure that the paint is evenly applied. When waxing by hand, first apply an appropriate amount of wax to the sponge (special waxing sponge), and then apply it in a straight line in a certain order, and each application should have a degree of overlap with the upper application area of 1 5-1 4 to prevent missing coating and ensure uniform application. When the machine waxes, the car wax is applied to the sponge of the waxing machine, and the specific application process is similar to that of the hand, it is worth noting that the application at the edges, corners and edges should avoid exceeding the paint surface, and it is easier to grasp the manual application in this regard.
3.Polished. According to the instructions of different waxes, polishing can be carried out 5-10 minutes after application.
When polishing, follow the principle of waxing first and polishing first, to ensure that the polished car surface is not polluted, and the polishing operation usually uses non-woven wool to reciprocate in a straight line, and press it hard to remove the remaining wax.
-
1. Myth 1: Waxing is too frequent, and there is no need to do it every month. Generally, there is a garage to park, and most of the vehicles driving on good roads can be waxed every 3-4 months.
Vehicles that are often parked in open conditions, due to wind blowing Sun Yu, it is best to wax every 2-3 months. You can also tell by touching, and if you don't feel smooth when you touch the car with your hands, you can wax it again.
2. Myth 2: New cars are also waxed for protection, and some car owners will wax new cars and feel more protected. In fact, there is a layer of protective wax on the paint layer of the new car itself, and premature waxing will remove the original wax on the surface of the new car, resulting in unnecessary waste.
3. Myth 3: The more expensive the car wax, the better, there are many types of car wax on the market, there are solid and liquid differences, and the quality of the car wax is not the same, but not the more expensive the better. It should be considered according to the characteristics of the car wax, the newness of the vehicle, the color of the car paint and the driving environment, for example, it is advisable to use anti-ultraviolet car wax in summer; When the driving environment is poor, choose the casein wax with outstanding protective effect; Ordinary vehicles can use ordinary pearl Chayu He color or metallic paint series car wax, and high-end cars should choose high-grade car wax, otherwise there will be damage to the car body.
-
When we wax the car, we must pay attention to cover the non-waxing area with a cloth to prevent pollution.
-
When waxing the car, it is necessary to pay attention to the waxing working environment to be clean, have good ventilation, and set up a special waxing workshop if possible. The car should be waxed in a cool place, otherwise the temperature of the car surface is high, and the adhesion ability of the car wax will decrease, which will affect the waxing effect. After waxing, the equipment and supplies should be properly cleaned and properly stored.
-
Car Waxing Proper Method:
1. Car washing. In order to ensure the effectiveness of waxing, the vehicle must be thoroughly cleaned before waxing.
2. Waxing. Waxing can be divided into manual waxing and mechanical waxing, manual waxing is simple and easy, whether manual or mechanical waxing, to ensure that the paint surface is evenly applied.
3. Polishing. According to the instructions of different waxes, polishing can be carried out after 5 to 10min after application. When polishing, follow the principle of waxing and polishing first to ensure that the polished car surface is not polluted, and the polishing operation usually uses a non-woven towel to reciprocate in a straight line, and press it appropriately to remove the remaining wax.
Precautions for the use of car wax:
1. Choose the right type of wax. How to choose a high-quality car wax in a dazzling array of market products is the key, it is recommended that it is best to choose a good brand product, which is a good protection for the paint surface of the car.
2. Pay attention to the location of waxingIf you are doing it yourself, pay attention to choosing a spacious and clean place that is easy to operate; If you go to a beauty shop for waxing, you should pay attention to the environment of the beauty shop, and it is best to choose a regular car beauty maintenance shop.
3. Master the frequency and time of waxingUnder normal circumstances, it is not recommended to wax the new car, according to the characteristics of your own driving environment and other characteristics, specifically check the surface of the car to ensure that the waxing is effective.
4. Do a good job of aftercare and cleaning, waxing is to make the car more beautiful, so after each waxing is completed, it is necessary to carefully check whether there is any car wax left in some corners to prevent the residue from corroding the body parts.
-
Waxing method: first wash the car with water and dry the water droplets, and then it is waxing, that is, the wax or wax water should be evenly foamed on the paint surface, it is best not to make circles, to follow the direction of the air flow, there are many small black spots on both sides of the door, only with wax can be cleaned. After the whole car is evenly foamed with wax, there is a layer of wax powder on the paint surface, according to the order of waxing, use a dry and clean towel to clean the wax powder on the paint surface, and the whole waxing process is completed.
Waxing by yourself is indeed a hard work, very tiring, from washing the car to cleaning up after waxing, but it takes three hours. But it's a pleasure, and besides, the wax you put on yourself is much cleaner and more beautiful than the money you spend. To be honest, my car has always been my own car washing and waxing, each time it takes more than three hours to complete the whole process, my waxing is actually a small black spot (asphalt) on the cleaning car, to wipe one by one, one by one, and to do hard, it is really hard.
-
Car waxing steps, waxing operation steps and processes, easy waxing does not hurt the car.
-
Do it yourself, learn how to wax your own car, and you can spend less money!
-
The method of waxing the car at home is: dip the car wax with a round sponge special for solid car wax, and evenly apply it to the surface of the car paint, without applying too thick, a thin layer.
During the application process, you can use a sponge to evenly draw circles on the body. In addition to the necessary cleaning, waxing is essential for the care of the vehicle. Proper operation can make the surface friction of the dust of the car partition, but also protect against ultraviolet rays, water and improve the brightness of the surface of the vehicle.
Many people report that their waxing is always bad, and the very important reason is that they did not clean the car body in advance. A clean body ensures that the surface of the car will not be scratched when waxing, and the effect can also be improved to a new level.
Extended Information: Here's how to wax a car:
To get better results, it is best to work in a cool or sheltered place, as high temperatures will destroy the fruits of labor. The liquid one is very easy to operate, apply the ready-made liquid wax to the surface of the car body, and then dry it little by little with a rag. During the process, you must remember to apply evenly, and it is best to operate one piece at a time.
Solid waxes aren't as simple as liquid waxes, but they're also easy to get started with. Pay attention to the appropriate amount when taking the wax, just use a small dot at a time, if the amount is too much, it will lead to repeated application.
-
Car waxing can have a good protective effect on car paint, and car owners need to go to car beauty shops often for waxing, and this cost is very high. Some car owners will want to wax the car at home, so that the cost will be greatly reduced, in fact, it is very simple to wax the car yourself.
The right way to wax a car:
1. Prepare car wax, clean towel and a sponge, be sure to wax in a cool place, remember not to be in the sun;
2. Clean the stains and dust on the surface of the vehicle first, and use a towel to wipe off the water on the body after cleaning;
3. Apply an appropriate amount of car wax to the sponge, and then when the sponge waxes on the body, be sure to turn the circle in a clockwise direction to ensure that each circle has an overlapping place, so as to prevent there from missing places;
4. After waxing, wait for a few minutes before using a towel to wipe it, be sure to wipe the wax on the car paint, otherwise there will be wax imprints on the car paint.
How long does it take for a car to be waxed before it can touch water
After the car is waxed, it takes half an hour before it can touch the water, because after the waxing, it is necessary to wait for the wax to dry before the car is considered to be successful. If the wax touches the water before it dries, it is possible that the wax in some locations will be washed away by the water, and that part will not be protected by the wax.
If the car owner does not clean the wax after waxing and leaves the wax marks, he can use a glue remover to remove the wax marks. Spray the adhesive remover on a clean towel and wipe down the wax marks on the paint. After waiting a few minutes for the adhesive remover to react with the wax marks, you can use a clean towel to wipe them clean, and you will notice that the wax marks have become lighter.
The owner can repeat this step again to remove the wax marks until the wax marks are completely removed.
It depends on the conditions, and it is generally water brought from the reservoir. Because tap water is too expensive and the river water will be a little dirty, it is generally water from reservoirs.
Hubei Chengli meets your requirements.
Chassis configuration: Dongfeng Duolika chassis, Yuchai 150 horsepower National IV engine, 6-speed gearbox, 3800mm wheelbase, with power steering, air brakes, nylon tires, single-row wide-body cab. >>>More
Because these sprinkler trucks will spray water all over the car and block people's vision.
Incident 1: I am the daughter of a driver who drives a drink truck and my dad is 40 years old. He loves his job and loves the clean roads under the washing of his car. Before dawn, my father had already gone out, and every time when I was asleep, I heard my mother say that he would check the condition of the car every day for fear that there would be a slight problem and make it impossible for him to continue his work. >>>More
Do not set a simple (weak) service password, do not set it to some number groups that have rules, are commonly used in life, and are often disclosed, such as , unit**, ID number, birthday number, home number, etc. >>>More