Can anyone tell me who is responsible for purchasing self adhesive labels in Midea s Household Appli

There are several branches of the Midea Household Appliances Division, each branch has its own planning and purchasing department, you go to the people of their respective planning and purchasing department, I don't know how to find the next Midea address book, I'll give you a few**:

Rice cooker company: Gao Zhiyong 26333694 Liu Libo 23606427 Liu Jianguo 26334021 Li Guiling, 26330769 (1769).

Liu Jun 23601854 Zhou Ruixing 26652222 (2222) Lu Aiping 26339286 (9286) fax: 26665407

Liao Xiaofei 26605831 (5831) Wu Hongbo 26605554(5554) Liang Yongxin 26337202 Liao Zhiliang 23601803 Lin Bangyao 26332679 Liu Xiong 26334863 Jian Jiaying 26339087 Du Pin 26335026 Sun Tao 26330745 (1745) Chen Guojun 26331315(1315) Jiang Xiaojuan 23601034 (1034) Yu Lixiong 26334082( 4082)

Electric Pressure Cooker Company Planning and Procurement Center: Wang Bo 26605042 He Jinqiang 23606742 Zhang Xiaoxin, Liang Jiangbo 23601266 Di Huiliang 26338408 Xiao Nian 22367789 Guo Shaohui 26605062 Pressure Warehouse 26339440 Li Jianfeng 23606272

Induction cooker company plans to purchase center: Liao's is 26332384

Shi Lili 23606584 Song Peixiang 23604294 Zhang Chengbo 23601958 Zhou Quanheng 23601837 Du Jianhua 23609077

Li Xia 23606851 Run, Xi'an 26331772 Huang Guohui 23601470 Zhang Fengju 23606179 Qiu Yi 23606670 Hu Lin 23606583

Ding Peng 26338695 Liu Fanghua 23601553 Wei Guidong 23601541 Li Guang 23606581 Tang Xianming, 23601247

Drinking water equipment company plans to purchase: Feng Yonggang 26339427 Zheng Wei 23601650 Wen Zhen 26339486 Deng Chunyan 26339461

Huang Chao 26334973 Huang Huaize 26334879 Zhu Guangqun 26334477 Chen Qiangtian 23606325

Wu Enting 26603492 Li Xing, Zhou Yiqi 23606665 Li Xianliang 23601650

Area code 0757

Just find the one in charge of sourcing the stickers.

Tell a colleague about you.

This depends on the material of the label, PET with acetone, which can waste labor and cost.

No way. The printing of the label must not be sloppy, you can see that there can be no traces of wiping on our regular product labels, and the label of PET cannot be erased.

The cost of a normal label is not too high, but the wrong content can affect the quality of the product.

It is strongly discouraged to do this, and the correct way to do this is to reprint and avoid mistakes. [Shangchen barcode].

Self-adhesive label stickiness test method, there is a good way for people in the factory.

Reason: The problem of initial adhesion, the instantaneous adhesion is not strong.

Test method: According to the GB4852 pressure sensitive adhesive tape initial tack test method (inclined rolling ball method), the initial tack of the specimen is tested by the adhesion of the label to the steel ball when the adhesive surface of the steel ball and the adhesive surface of the self-adhesive label specimen is in brief contact with a small pressure.

Result: A total of 33 standard steel balls, which are labeled with the largest steel ball size to indicate their initial tack.

Instrument used: initial tack tester.

2) Situation: Many people find that the labels that have been attached have fallen off on their own after a short time, and they have no stickiness.

Reason: The problem of stickiness is poor retention.

Test method: According to the GB4851 pressure sensitive adhesive tape stickiness test method, the label is pressed and attached to two test boards with a standard pressure roller of 2 kg, one test board with adhesive specimens is hung vertically on the test frame, and a weight of 1 kg is hung at the lower end of the other test board.

Results: The displacement of the specimen after a certain period of time, or the time when the specimen is completely detached, was used to characterize the adhesive's ability to resist pulling.

Instrument used: Stickiness tester.

3) Situation: The attached label is easy to peel off and can feel that the adhesive strength is low.

Cause: The peel strength is too small.

Hope it helps, dear

Self-adhesive manufacturers Boyi Exhibition can provide you with, you contact it.

Dip it on your face and see how much hair you have dropped!

Generally, there are three main parameters:

1. Initial adhesion: The common one is the rolling ball method, that is, the adhesive side is fixed upwards on an inclined plane, and then the standard steel ball (with a small size) slides down from above, and the larger the steel ball that can be adhered to, the greater the initial adhesion.

2. Stickiness: Stick two standard steel plates with hooks with self-adhesive, and then hang one steel plate on the fixed frame, and put a 2kg weight at the other end to see how long the steel plate below still does not fall off, and calculate the time it can last.

3. Peeling force: Glue the self-adhesive on the standard steel plate, tear off the label at a constant speed of the instrument, and use the force of the instrument a few times, this force is the peeling force of the self-adhesive.

The pressure-sensitive adhesive used for labels is generally water-based pressure-sensitive adhesive, and the coating is generally printed in accordance with the transfer glue, that is, it is coated on the isolation paper and then transferred to the label, and the specific requirements are solid content, viscosity, adhesive performance, initial adhesion and whether there will be flowers or shrinkage holes after coating the isolation paper, which need to be paid attention to. Finally, I wish your relatives a prosperous business and a lot of money!

Adhesives are the most important part of self-adhesive label technology and are the key to self-adhesive label application technology. The initial viscosity, final viscosity, shear strength, UV resistance, solvent resistance, cold flow ability, minimum labeling temperature, and application temperature range of the adhesive are all things that need to be considered when purchasing. Anmei** recommends that you try it out in a small area first, and then produce it after it is suitable, which is more safe.

-Anmei** Printing Department.

It depends on what type of pressure-sensitive adhesive you want to use, oily or water-based.

Hello, the ink used in our company is food grade, you can take a look at MEMJET JM280C

There seems to be one, our company's labels are made for a company that seems to be called Wenjing Industry, ** is OK, and the quality is also good. The address seems to be on Jinwei's side.

What kind of society is now. Still hanging from a tree. The closer you are, the higher!

They'll think you're looking for something close. What is required is to be reasonable, and of course, quality! It doesn't matter where you do it, as long as it meets my requirements and delivers on time.

I don't know over there, but there are many other places.

You can go to the local factory or industrial area where you are more concentrated, or post it and ask the group to ask better, after all, there are too few people who know about this, I hope to adopt, I hope you can find the job you want!!

I don't know, but you can go to their official website to check it**, and call** to ask.