How is the thickness of the splint selected in the interior decoration? 15

Yes, because the use of the thickness of the board required in many places in the interior decoration may be related to the consideration of the design, so there will be different thickness of the board used in each place.

It depends on what kind of wooden flooring you choose.

Strengthened, mostly between 8-12mm, but also some 15mm.

solid wood, generally at 18mm

Multi-layered, mostly in 15-18

Wood flooring is currently a relatively mature product and an important material in home decoration.

Plywood, also known as plywood, is a planing of logs into slices about 1 mm thick per layer. After fully air-drying, glue is added, compacted by special machinery and equipment, and then the decorative texture and good material surface layer are pasted on both sides, and cut into decorative plates of certain specifications. The most commonly used splint specifications in decoration are 1220 mm and 2440 mm.

The hardness of the splint is generally high, because the material and texture have been vertically staggered with each other in the gluing process, so it has high strength and is not easy to deform.

According to the number of layers, the splint can be divided into three splints, five splints, nine splints, twelve splints, eighteen splints and other varieties, the most commonly used in decoration is three splints and five splints, that is, we usually call three plywood and five plywood. The more layers of the splint, the greater the thickness, the higher the strength, the stronger the load-bearing force, and the less likely it is to bend. Splint is mostly used in high-grade decorative base structures.

It is suitable for installation and fixing of decorative parts with large loads.

Of course, the splint also has its own shortcomings, that is, the general cost is higher; If the material is not fully dried or there is a problem in the production process, which causes the plate to be deformed, it is difficult to adjust the external force; In addition, the plywood is not as smooth as the surface layer of the MDF, and the base layer is made of the plywood, and when the veneer materials such as fireproof board and aluminum-plastic board are bonded on the surface, it is not as firm as the base layer of the MDF.

It is not difficult to choose a splint, which can be considered in the following directions:

Nine plywood is also known as nine layer board, its thickness is 9 mm, the material can be MDF, and can make multi-layer board, but generally refers to 9 mm multi-layer board, nine plywood is used very widely in furniture manufacturing, and it is used more in interior decoration.

Generally, nine plywood can be made into cabinets, cabinets, seats, wardrobes and other panel furniture in furniture manufacturing, and used in interior decoration can be used as ceilings, wall skirts, floor liners, etc., and used as concrete building templates, building components, etc. in construction projects, and is also widely used in the vehicle and ship manufacturing and packaging industry, because nine plywood is a type of plywood, so what is different from three plywood, five plywood, etc., basically belong to plywood, they may be different in thickness, Generally, the length of the nine plywood is 2440 mm and the width is 1220 mm, but this can be produced according to individual requirements.

Product specifications: 2440mmxl220mmx12mm5ct. 10 PCT.

15 cents, 20 cents.

[1220x2440]]]

It's all national standards. In fact, the actual measurement is the size above. It's going to be a little less. But good brand wood is comparatively sufficient in size.

Speaking of which, you are also an insider, it is estimated that you have just entered the industry, and your business has been mainly commercial projects!

Let me tell you: 1. The size of the wooden keel depends on the requirements of the process, and the keel of the general wooden arc-shaped structure does not play a supporting role, but plays a role as a foil to the gravity ** point, so the specifications are usually not large *4). The bending of the wooden keel must be slotted, and the slotting is also particular, depending on the different bending, different slots are opened.

2. The panel curved arc type usually uses 3 centimeters and 5 centimeters board, and there are design and construction requirements that can use 9 centimeters or larger specifications, (professional screw groove machine screw seam on the reverse side) Note: The splint (plywood) of the core material of Eucalyptus should be used

Make an arc or a circle:

1. Make a wooden keel to the skeleton, with a three-layer plate covering surface molding;

2. Use a large core board to make a template according to the shape, with a three-layer board cover.

The cover can also be used for single-sided opening of gypsum board, and then use putty to find the shape.

2 ways:

1 is the continuous groove of the wood square, the density depends on your bending, 2 is sawn out of the circle with a wooden plank, the thinner the panel, the better, 3-5 centimeters can be.

There is no special technique, it is all manual work, and sometimes the panels are watered, which makes it easy to bend.

The person in charge of the merchant Shida Decoration Studio in the South Building of Dengfa Decoration Home Improvement Base, Hexi District, Tianjin, is called Chen Xinhong, and the decoration quality is very poor! Please don't be fooled!

My home tile laying is uneven, the tile is hollowed, the wall is cracked (the place where the slotted wiring pipe is the most serious), the details such as the window are not treated, the quality of the workers is too poor, the person in charge is arrogant and unreasonable, I hope that netizens who have the intention to decorate carefully choose the decoration company! Don't be deceived again! Don't forget!

By environmental protection level.

The score is three levels. Now the best plate is also the carb grade. As for the grade of the board, this should be the classification of the board, such as what is in the woodworking board, which is for tooling, and which is for home decoration.

If you are a novice designer, you will run more construction sites and smoke more cigarettes for carpentry masters, and most of them will not tell you now. The housekeeping skills are gone.,There's one more competitor.。。 A lot of people don't do that.