How to use the operation steps of Haier drum washing machine?

1. Warm washing.

2. Pre-washing: Dirty clothes can be washed from pre-washing.

3. Pretreatment: Spray a little collar on dirty parts such as collars and cuffs.

4. Soaking: Deeply dirty clothes can be pre-washed for a while, and then disconnected from the power supply to soak for a few hours, and then turn on the power to wash again, which can make the washing effect better.

5. Use low-foaming laundry detergent: Because there is too much foam in high-foaming laundry detergent (especially when washing at temperature), the washing and rinsing effect is greatly weakened.

6. Use cold water to wash when the tap water temperature is high;

7. Choose the appropriate washing water temperature according to the fabric material;

8. Choose different starting washing procedures according to the degree of cleanliness of the clothes, and choose fast washing for clothes that are not too dirty, which can save water, electricity and time.

1.The amount of laundry washed by Haier drum washing machine should not be too much or too little at a time, and it is best to achieve the most effective cleaning effect in about 80%-90% of the clothes.

2.Many Haier drum washing machines have metal shells, so it is best not to put the washing machine in a damp place, or install a special base for the washing machine to slow down the rust of the washing machine by the damp ground, and the door should be opened for a while after each wash, and wait for the inside to dry naturally.

3.There is a water-blocking rubber ring in the door hole of Haier drum washing machine, which should be wiped clean with a towel after each use, otherwise it will leave something sticky and easy to mold; This is also the key location for front-loading washing machine cleaning.

If the machine is faulty, it will be reported for after-sales maintenance, and there is no point in engaging in text Q&A.

The operation method of Haier drum washing machine is as follows:Tools Materials: Haier drum washing machine, laundry detergent, disinfectant.

1. First connect the socket of the drum washing machine.

2. Then open the laundry detergent addition box of the drum washing machine.

3. After that, pour laundry detergent into the main sink of the laundry detergent addition box.

4. Then pour disinfectant into the disinfection tank of the laundry detergent box.

5. Then close the detergent box of the drum washing machine.

6. Secondly, on the panel of the drum washing machine, click the "Start Adding Clothes" button.

7. Finally, the drum washing machine starts to clean.

To use Haier drum automatic washing machine, you first need to connect the power plug of the drum washing machine, open the water valve, then put the clothes into the drum and cover the lid, put laundry detergent or laundry detergent in the detergent dispensing box, turn on the power switch of the washing machine to set the parameters and press the "Start Pause" button.

First, you need to open the water valve and plug in the power plug of the washing machine;

2. Put the clothes in the washing machine drum and close the door;

3. Open the detergent dispensing box and add laundry detergent or detergent;

4. Turn on the power switch of the washing machine;

5. Adjust the knob of the control board according to the different clothing materials to choose different washing modes;

6. Adjust the water temperature, dehydration time, rinsing, etc. through the button;

7. After adjusting the parameters, you can press the "Start Pause" button to automatically do laundry.

Precautions1. When using hot water for washing, do not use more than 50 hot water, and pay attention not to splash the water on the control board, so as to avoid the internal electrical parts from being burned due to water.

2. Before washing clothes, you must carefully check the labels on the clothes to see if they can be washed, ironed, etc., and choose the corresponding washing process according to the texture of the clothes, such as cotton, chemical fiber, wool, etc.

1. First of all, you need to connect the power plug of the drum washing machine, which is a prerequisite for the washing machine to work.

2. Press the washing machine door handle to open the washing machine door, and then put the clothes into the drum, and be sure to cover the lid.

3. Open the detergent dispensing box and put in the laundry detergent or detergent.

4. Turn on the power switch of the washing machine.

5. Choose the laundry mode according to the different materials of the clothes, adjust the knob of the control panel, and the position of the indicator light is the current laundry mode.

6. After selecting the washing mode through the knob, the water temperature, dehydration speed, rinsing, pre-washing, etc. can be adjusted separately through the button on the right side, and a parameter can be changed every time the button is pressed.

7. After adjusting the parameters, you can press the start pause button for automatic laundry.

Summary. Give me the model of Haier washing machine, I will check the manual for you, or if you have specific questions, you can directly send ** and I will help you see how to operate.

Give me the model of Haier washing machine, I will check the manual for you, or if you have specific questions, you can directly send ** and I will help you see how to operate.

How to use this.

Hold on. I'll find you the manual, okay?

The tutorial for using Haier drum washing machine is as follows:

1. Connect the power plug of the drum washing machine, open the water valve, and then open the detergent dispensing box, pour in the laundry detergent or laundry detergent, or pour the detergent directly into the inner cylinder of the washing machine.

2. Put the dirty laundry in the drum of the washing machine, making sure there is enough space for the clothes to move while washing.

3. Select the laundry mode according to the clothing material, adjust the knob of the control panel, and the position pointed by the indicator light is the current laundry mode. After selecting the laundry mode, the water temperature, spin speed, rinse, pre-wash, etc. can be individually adjusted via the button.

4. Close the door of the drum washing machine, adjust the parameters, and press the start or pause button for automatic laundry. When the drum washing machine is plugged in, the electric door lock will lock the door to ensure safe use.

5. Wait until the washing machine beeps, which proves that the laundry work has been completed. Then turn off the faucet, turn off the power plug, wipe the washing machine clean, and take out the clothes to dry.

How to buy a washing machine

1. The place of purchase, it is best to choose to buy in the home appliance market, you can directly compare the styles of various styles, and you can also make a comparison more intuitively. If you have any questions, you can also directly ask the service staff for face-to-face communication.

2. The washing machine should determine the style to buy, and choose the drum or the ordinary model. The ** of the drum will be relatively expensive, and the ** of the ordinary model will be relatively cheap, so you can choose according to your own situation.

3. The operation interface, the operation interface is simple and beautiful, and it is the best. You can know the selection of some programs through the operation interface, and there are many program choices, so we are relatively simple to operate, and you can operate with one click.

4. Pay attention to the power consumption level, the lower the power consumption level, the less electricity we spend when we use it, and the higher the level, the more electricity will be spent. Of course, relatively, the level is low, and the ** will be a little higher, which depends on your own choice.

The operation method of Haier front-loading washing machine is as follows:Tools Materials: Haier drum washing machine, laundry detergent, disinfectant.

1. The first sedan car is connected to the socket of the drum washing machine.

2. Then open the laundry detergent addition box of the drum washing machine, and then pour the laundry detergent chamber into the main washing tank of the laundry detergent addition box.

3. Then pour disinfectant into the disinfection tank of the closed Yuanchang box for adding laundry detergent, and then close the laundry detergent box of the drum washing machine.

4. Secondly, on the panel of the drum washing machine, click the "Start Adding Clothes" button.

5. Finally, the drum washing machine starts to clean.

The operation method of Haier front-loading washing machine is as follows:

The power plug of the drum washing machine needs to be connected and the water valve opened, which is a prerequisite for the washing machine to work. Open the washing machine by pressing the tablet on the door handle of the washing machine, and then put the laundry in the drum, making sure to change the lid. Open the detergent dispensing box, put in laundry detergent or laundry detergent, turn on the power switch of the washing machine, and choose the laundry mode according to the different materials of the clothes.

Adjust the knob of the control panel, the position of the indicator light is the washing mode currently used, after selecting the washing mode through the knob, the water temperature can be adjusted separately through the right button, and each time the button is pressed, a parameter is changed, and after adjusting the parameter, you can press the start pause button to carry out automatic laundry.

Precautions for the use of drum washing machines:

1. Dirty laundry needs to be soaked in deep washing. The front-loading washing machine simulates the principle of hand rubbing, with uniform cleanliness, low wear rate, and easy entanglement of clothes, and can also wash high-end clothes such as cashmere, wool and silk in the machine. However, deeply soiled laundry needs to be pre-washed for a while, then disconnected from the power supply and soaked for a few hours, and then turned on the power supply to wash again, which can make the washing effect of Xingqin better.

2. Avoid using high-foaming detergents. Wash your clothes in a smart drum washing machine, it's best to choose a concentrated laundry detergent and avoid using detergents such as high-foaming laundry detergent. Because during the washing process of the drum washing machine, if there is a large amount of foam, this will cause more pressure in the washing machine, which is easy to cause the problem of water leakage.

The operation method of Haier front-loading washing machine is as follows:Material Tool: Haier drum washing machine.

1. First of all, put the clothes to be washed into the washing machine, add detergent to the laundry sink, and close the door.

2. Turn on the power switch.

3. Select the laundry mode, and the general standard can be written.

4. Start to choose the appointment time, you don't need to press it for washing immediately, press this button to make an appointment, and press it once to postpone it for 1 hour.

5. Then choose the washing time, generally add 10 minutes in winter. Carry wisdom.

6. Select the number of rinses, and rinse the laundry detergent three times.

7. Choose to disperse the hidden dust and choose the dehydration time, the longer the time will fall, the drier it will be, generally 7 minutes.

8. Choose the speed of the drum, the faster the speed, the drier it will be thrown, but the louder the noise.

9. Choose the additional mode of laundry, which can be washed or sterilized by air, and sterilized is generally selected.

10. Finally, after the setting is completed, press the start button, and be sure to see the lock door and wait for the light to turn on before leaving.

The above content refers to Encyclopedia-Haier.