How to create wifi on the computer to connect the mobile phone???

1.Click Start Settings Network Connection Wi-Fi Right-click to select Properties, that is, to open the wireless connection in Network Neighbor.

2.Double-click in the Properties dialog box.

Internet Protocol" and set the IP address manually.

3.After setting the IP, click OK, and then go back to the properties dialog box just now. Click on the tab "Wireless Network Configuration", and then click on "Advanced" inside

4.If you have the same settings, you can click "Close" to return, click "Add", and enter the name of the network you want to create.

5.You can click OK for the same settings, and if a dialog box appears, select the Still Connect button. Then, click OK to sign out to complete the network setup.

6.Next, set up a network share.

Click Start Settings Network Connection Local Connection Right-click to select Properties. That is, the property that opens the local connection. In the Local Connection Properties dialog box, select the Advanced tab and set it to Internet

Connection sharing. 7.Turn off the firewall.

8.Refresh the wireless connection of the computer, and you can see the network hotspot you just set.

9.Well, you can connect your phone to the set network to surf the Internet!

Notebook not? The laptop depends on whether your wireless network card can support the AP function.

If you can't, you must use the computer to create wifi, then you can buy a wireless network card that supports the AP function, which is estimated to be about 70 yuan, but it is really better to buy a wireless router. Complete.

Tools Material: Laptop.

1.Locate the Win and R keys on your keyboard.

2.Hold down the win key and the r key at the same time, and enter cmd in the [Run] that pops up.

3.After entering cmd, press the [Enter] key directly, and the following interface will appear.

4.Copy command 1: netsh wlan set hostednetwork mode=allow ssid=good key=12345678, and in the command prompt window, choose Paste.

5.After pasting the command in step 4, press [Enter] directly, and the following prompt will appear, which means that the virtual wireless network card has been successfully established.

6.Then, in the above window, continue to paste command 2: netsh wlan start hostednetwork, if the following figure appears, it means that the wireless network is successfully opened.

7.Find the network connection icon on the system tray in the lower right corner of the desktop, and right-click and select Open Network and Sharing Center to open the following window.

8.Click Change Adapter Settings in the image above to display the following window.

9.In the image above, select [Local Connection] and right-click, select [Properties] and the window will appear as shown in the following figure.

0.After selecting the [Share] tab in the above figure, the interface appears as shown below.

11.In the window that appears above, check Wi-Fi2.

12.At this time, take a look at the three icons in our network connection, and the following picture has been continued.

1. Install the mobile phone assistant software on the computer and mobile phone, install the PC version on the computer, install the Android, Apple or Windows version on the mobile phone according to the model, and the mainstream mobile phone assistant software can be;

2. Open the mobile assistant software installed on the computer to check the connection status;

3. Select the wireless network connection, click Connect Now, and complete the scanning and connection of the software on the mobile phone to the wireless connection on the computer;

5. If the Yunqi system cannot recognize the mobile phone, you can delete the mobile phone driver in the device manager and reconnect.