Why promote the use of energy saving lamps and what are energy saving lamps

The Ministry of Finance and the Ministry of Finance jointly issued the "Interim Measures for the Management of Financial Subsidy Funds for the Promotion of High-efficiency Lighting Products". The measures stipulate that urban and rural users will be subsidized by 50 percent of the supply of each high-efficiency lighting product by urban and rural residents, and 30 subsidies will be given by the finance for each high-efficiency lighting product for bulk users.

Beijing, 21 Jan (ZXS) -- The reporter learned today that in order to vigorously promote high-efficiency lighting products, in the future, the financial department will subsidize 50 percent of the supply of each high-efficiency lighting product used by urban and rural users in China according to the bid-winning agreement, and the financial department will give 30 percent subsidy to each high-efficiency lighting product for bulk users.

Today, the Ministry of Finance of China and the National Development and Reform Commission jointly issued the "Interim Measures for the Management of Financial Subsidy Funds for the Promotion of High-efficiency Lighting Products", which is another important measure for China to increase efforts to promote high-efficiency lighting products and promote the realization of energy conservation and emission reduction goals.

It is understood that most of the lighting in some public places in China adopts traditional power supply lighting, which is not energy-saving and environmentally friendly. The focus of this subsidy is to support high-efficiency lighting products to replace incandescent lamps and other inefficient lighting products in use.

In this regard, China will adopt indirect subsidies to promote, that is, unified bidding to determine the promotion of high-efficiency lighting products and the agreement to supply**, financial subsidy funds to the winning enterprises, and then by the winning bidders according to the bid-winning agreement to supply ** minus the financial subsidy funds ** sold to end users, the ultimate beneficiaries are bulk users and urban and rural residents.

The relevant departments estimate that during the "Eleventh Five-Year Plan" period, China will promote 150 million high-efficiency lighting products through financial subsidies, which can save 29 billion kilowatt hours of electricity and reduce carbon dioxide emissions by 29 million tons.

In fact, product promotion can be done in many places, such as post bars, forums, blogs, etc., but at present, some channels are not easy to do, so our company is currently letting Jin Suitui do this, and the calculation time has been three years.

Saving electricity; Environmental protection; Cheap;

Energy-saving lamps, also known as energy-saving lamps, electronic lamps, compact fluorescent lamps and integrated fluorescent lamps, refer to lighting equipment that combines fluorescent lamps and ballasts (stabilizers) into a whole. The size of the energy-saving lamp is similar to that of the incandescent lamp, and the interface with the lamp holder is also the same as that of the incandescent lamp, so the incandescent lamp can be replaced directly. The official name of the energy-saving lamp is the rare earth trichromatic compact fluorescent lamp, which was born in the 70s of the 20th century in the Netherlands by Philips.

Under the premise of achieving the same light energy output, this light source only needs to consume 1 5 1 4 of the electricity consumption of ordinary incandescent lamps, so that it can save a lot of lighting power and costs, so it is called energy-saving lamp.

The energy-saving lamp is mainly composed of "upper lamp head structure" and "bottom lamp tube structure", and an energy-saving electronic ballast is included in the combined structure. It is characterized in the space below the upper joint structure and the energy-saving electronic ballast, a partition structure is added, and a growth section cavity structure is arranged in the lower joint structure part, and around the outer wall of the section growth cavity structure, a plurality of through holes are arranged in the ring, which are used for multiple heat insulation, diversion, heat dissipation, and ensure the normal service life of energy-saving lamps, and the shape of common energy-saving lamps is shown in Figure 2-8.

Figure 2-8 Spiral energy-saving lamps and straight tube energy-saving lamps.

Energy-saving lamps are also called compact fluorescent lamps, energy-saving lamps are mainly through the energy-saving lamps and the embodiment of low power consumption of electronic ballasts, electronic ballasts not only to ensure that energy-saving lamps provide start-up current and start-up high voltage under its characteristics, but also to improve the high-frequency and stable AC current of the lamp during normal operation.

Nowadays, people are vigorously advocating the conservation of electricity, and many people's electric lights have been replaced by energy-saving lamps from the original incandescent lamps. Energy-saving lamps, also known as energy-saving bulbs, electronic bulbs, compact fluorescent lamps, and integrated fluorescent lamps, are lighting devices that combine fluorescent lamps and ballasts (stabilizers) into a whole.

The energy-saving lamp has two major functional characteristics: one is the wide working voltage: 170V-250V is suitable for China's power supply needs, long life, and the average service life is 8000 hours.

No noise, no flicker, no interference to communication and household appliances. 80% less power than ordinary incandescent bulbs; The second is the use of high-quality pure trichromatic phosphor tube, high light efficiency, small light attenuation, natural light, less power consumption, low heating, color temperature of 2700K, 6400K, is the best choice for lighting sources. It is these two characteristics that make energy-saving lamps quickly accepted and trusted by users.

But energy-saving lamps have a fatal shortcoming, that is, the impact of waste energy-saving lamps on the environment is very serious, it is understood that in 2012, energy-saving promotion projects have hundreds of millions of energy-saving lamps scrapped, if each energy-saving lamp can pollute 180 tons of water and soil, then hundreds of millions of energy-saving lamps will be a serious environmental problem. Therefore, if the problem of waste energy-saving lamps and disposal is not done well, it will be a disaster.

When the energy-saving lamp is ignited, the lamp filament is heated by the electronic ballast, the filament begins to emit electrons (because some electronic powder is coated on the filament), the electrons collide with the argon atoms filled in the lamp, the argon atoms obtain energy after the collision and hit the mercury atoms inside, the mercury atoms jump to produce ionization after absorbing energy, the plasma state is formed in the lamp, and the voltage at both ends of the lamp is directly conducted through the plasma state and emits ultraviolet rays, and the ultraviolet rays excite the phosphor. Energy-saving lamps have a bright-line spectrum (discontinuous), so the usual energy-saving lamps have a purple light, and things will be severely discolored when looking under energy-saving lamps. Blue will turn purple, and reddish yellow will look more vibrant.

Therefore, energy-saving lamps should not be used in the workplace with color matching.

In order to save money, energy-saving lamps can reduce electricity consumption and can save more electricity bills.

Because the light of the energy-saving lamp is particularly good, and it also has a certain protective effect on the eyes, the key is that it is particularly beautiful, and it is also particularly power-saving, and the cost performance is very high.

Because energy-saving lamps are very energy-saving, after all, if people choose to live in their own homes, or rent a house, they will consider the problem of electricity bills, after all, this is not a small amount.

Because energy-saving lamps are relatively simple and atmospheric, and can save a lot of electricity, the monthly electricity bill will be less.

Because after choosing this, you can save some expenses for the family, and you can also save energy consumption and waste for the family.

Because this kind of bulb is very energy-saving, the consumption is less, so that the electricity will be less, especially cost-effective, low cost, so people choose.

It is because such a lamp is very convenient to use, and it is also very energy-saving, and the appearance is also very beautiful, and it is also inexpensive.

It is because the degree of electricity consumption is too high now, so they will choose this energy-saving lamp, also to save a little electricity.

Preamble: Now our lives are advocating green conservation, so energy-saving lamps.

Gradually, it appeared in people's lives. Energy-saving lamps can also be called energy-saving light bulbs, just by listening to the name energy-saving lamps, we know that they can save energy and help us reduce a lot of electricity bills. Let's share with you why many people choose energy-saving lamps in life?

If we start our own family, we will find that the daily expenses are very large, and the salary of thousands of yuan per month may not be able to meet the needs of daily life, so it is very necessary to choose an energy-saving lamp to reduce the expenditure of electricity. Because the common energy-saving lamps are compact fluorescent lamps, this kind of fluorescent lamps use an electric current to excite mercury vapor, and the mercury atoms are excited to radiate ultraviolet rays under the action of an electric field, and the ultraviolet rays are absorbed and emitted by the fluorescent substances on the lamp wall. In this way, there is no need for a high temperature to emit light, so the energy loss is relatively small, and the effect of energy saving is achieved.

Energy-saving lamps versus ordinary incandescent lamps.

In contrast, it has no safety hazards, because ordinary incandescent lamps may cause abnormal power supply due to circuit aging and other reasons, which can easily bring many safety problems. The energy-saving lamp is a relatively green and environmentally friendly product, which will be relatively simple to use, and if there is a problem, it is also very convenient to maintain. It is more convenient to use, and there will be no various accidents.

Energy-saving lamps are very energy-saving, but we must pay attention to reasonable use in the process of use. Only in this way can we play the due role of energy-saving lamps and achieve the purpose of energy saving at the same time. For some places with relatively small space, such as toilets, corridors, etc., it is very suitable for the use of energy-saving lamps.

If it is a large-area place that requires uniform lighting, it is not appropriate to choose energy-saving lamps.

Mainly because after choosing such a lamp, we can save energy and electricity, and there is such a lamp, it will not be dazzling, and it is good for our eyes to turn on this light at night.

Because energy-saving lamps are very energy-saving, and now they are also very popular, and this energy-saving lamp is also very environmentally friendly, and the brightness is relatively high.

Because this kind of lamp is more energy-efficient, the light source is very soft, and only one can illuminate the whole house, so everyone chooses energy-saving lamps.

This kind of lamp can protect the eyes, can also save energy, is very efficient, is relatively safe.

1. Save energy and money.

2. High light efficiency and great benefits.

3. Long service life.

Small size, beautiful shape, easy to use.