-
Anonymous users2024-02-15As long as you don't have a device on it, you can turn it off.
But I think it's better not to be off.
-
Anonymous users2024-02-14When the redundant channels are closed, it plays the role of boot acceleration.
How to Close: Steps to Close an Idle IDE Channel:
Right-click on "My Computer Properties" and then click on "Hardware".
Click on "Device Manager" and open "IDE ATA Pata Controller" (there are slight differences between different chips).
Enter the primary and secondary IDE channels respectively, select "Advanced Settings", find the item where the "Current Transport Mode" is "Not applicable" (this is the corresponding to the idle IDE channel), set the "Device Type" of this item to "None", and OK. ”
IDE stands for "Electronic Integrated Drive", which originally refers to a hard disk drive that integrates a "hard disk controller" with a "disk body". The integration of the drive with the controller reduces the number and length of cables in the drive interface, enhances the reliability of data transmission, and makes it easier to manufacture the drive, as the drive manufacturer no longer needs to worry about whether its drive is compatible with other manufacturers' controllers. The hard drive is also easier for users to install.
Generally, there are two IDE interfaces (IDE1 and IDE2) on each motherboard. Each port can be connected to two hard disks or two optical drives. The interface that connects the hard disk and optical drive to the motherboard in the chassis is the IDE interface.
-
Anonymous users2024-02-13When the redundant channel is closed, it plays the role of boot acceleration, that is, when the boot is turned on, the XP rollback bar scrolls a few times, that is, the redundant channel is closed and is not detected, in fact, your redundant channels are not fully used, if there are devices on the channel, they must be turned on, if they are not opened, some devices cannot work normally.
-
Anonymous users2024-02-12Right-click on the desktop My Computer Management Device Manager IDE ATA ATAPI Controller, and set the device types in the advanced settings of the primary and secondary IDE channels to none.
Only if you don't connect to the relevant hardware, you have the option to no), this method is better than any other optimization to speed up the boot speed. However, if you want to add new hardware to its channel in the future, you must turn on the corresponding one, otherwise the new hardware will not be recognized.
Right-click on the property to view advanced options and resources No description and resources are on it Note: There are the same of these.
No, as for the function of closing the idle IDE channel, it's basically about the speed of booting.
Hopefully so.
-
Anonymous users2024-02-11Turn on the shutdown or something, it will be a little bit faster.
-
Anonymous users2024-02-10When the redundant channels are closed, it plays the role of boot acceleration.
How to Close: Steps to Close an Idle IDE Channel:
Right-click on "My Computer Properties" and then click on "Hardware".
Click on "Device Manager" in the lobby and open the "IDE ATA Pata Controller" in the pretense (there is a slight difference between different chips).
Enter the primary and secondary IDE channels respectively, select "Advanced Settings Deficit", find the item where the "Current Teleportation Mode" is "Not applicable" (this is the corresponding to the idle IDE channel), set the "Device Type" of this item to "None", and OK. ”
IDE stands for "Electronic Integrated Drive", which originally refers to a hard disk drive that integrates a "hard disk controller" with a "disk body". The integration of the drive with the controller reduces the number and length of cables in the drive interface, enhances the reliability of data transmission, and makes it easier to manufacture the drive, as the drive manufacturer no longer needs to worry about whether its drive is compatible with other manufacturers' controllers. The hard drive is also easier for users to install.
Generally, there are two IDE interfaces (IDE1 and IDE2) on each motherboard. Each port can be connected to two hard disks or two optical drives. The interface that connects the hard disk and optical drive to the motherboard in the chassis is the IDE interface.
-
Anonymous users2024-02-09The computer can be turned off directly.
IDE stands for "Electronic Integrated Drive", which originally refers to a hard disk drive that integrates a "hard disk controller" with a "disk body". The integration of the drive with the controller reduces the number and length of cables in the drive interface, enhances the reliability of data transmission, and makes it easier to manufacture the drive, as the drive manufacturer no longer needs to worry about whether its drive is compatible with other manufacturers' controllers. The hard drive is also easier for users to install.
Generally, there are two IDE interfaces (IDE1 and IDE2) on each motherboard. Each port can be connected to two hard disks or two optical drives. The interface that connects the hard disk and optical drive to the motherboard in the chassis is the IDE interface.
Steps to close an idle IDE channel:
Right-click on "My Computer Properties" and then click on "Hardware".
Click on "Device Manager" and open "IDE ATA Pata Controller" (there are slight differences between different chips).
Enter the primary and secondary IDE channels respectively, select "Advanced Settings", find the item where the "Current Transport Mode" is "Not applicable" (this is the corresponding to the idle IDE channel), set the "Device Type" of this item to "None", and OK. ”
-
Anonymous users2024-02-08Right-click on "My Computer", select "Administration", open the "Computer Management" window, select "Device Manager", click "IDE ATA ATAPI Controller" on the right, select "Secondary IDE Channel" and "Attention IDE Channel", right-click and select "Properties", select "Advanced Settings" tab, and set the "Device Type" of "Device 0" and "Device 1" below to None.
-
Anonymous users2024-02-07The computer can be turned off directly.
IDE stands for "Electronic Integrated Drive", which originally refers to a hard disk drive that integrates a "hard disk controller" with a "disk body". The integration of the drive with the controller reduces the number and length of cables in the drive interface, enhances the reliability of data transmission, and makes it easier to manufacture the drive, as the drive manufacturer no longer needs to worry about whether its drive is compatible with other manufacturers' controllers. The hard drive is also easier for users to install.
Generally, there are two IDE interfaces (IDE1 and IDE2) on each motherboard. Each port can be connected to two hard disks or two optical drives. The interface that connects the hard disk and optical drive to the motherboard in the chassis is the IDE interface.
Steps to close an idle IDE channel:
Right-click on "My Computer Properties" and then click on "Hardware".
Click on "Device Manager" and open "IDE ATA Pata Controller" (there are slight differences between different chips).
Enter the primary and secondary IDE channels respectively, select "Advanced Settings", find the item where the "Current Transport Mode" is "Not applicable" (this is the corresponding to the idle IDE channel), set the "Device Type" of this item to "None", and OK. ”
-
Anonymous users2024-02-06It can be turned off in the BIOS. But. It is recommended that you read the motherboard manual carefully. The settings are a little different depending on the motherboard.
-
Anonymous users2024-02-05Since the Windows XP system will automatically detect the IDE device on the computer during the boot process, turn off the detection of idle IDE channels to speed up the system boot. However, the erroneous claims circulating on the Internet need to be corrected: many people think that simply disabling idle IDE channels in the BIOS is enough, and some people recommend shutting down both the BIOS and the system at the same time.
First of all, the first method is not effective at all, because the XP operating system can independently monitor the various states of the computer hardware, bypassing the BIOS of the motherboard; The latter approach is redundant. Therefore, it can only be turned off in Windows XP to truly disable idle IDE channels.
Here's how to do it]: right-click "My Computer Properties", then click "Hardware" and then click "Device Manager", open "IDE ATA PATA Controller" in it (different chips are slightly different), and then enter the main and secondary IDE channels respectively, as shown in the figure: select "Advanced Settings", find the "Current Transfer Mode" as "Not applicable" here (this is the idle IDE channel corresponds), set the "Device Type" of this item to "None", and OK. ”
No, I really deserve it. Flies do not bite seamless eggs. You've said "it's all because of that woman's troublemaker." Push it all out. Trust is paramount, more than anything else. >>>More
To get rid of the little stars on your face, there are actually many ways to try. It is very important to maintain good cleaning habits. Cleansing your face with a gentle cleanser every morning and evening can help remove dirt and buildup from the surface. >>>More
Whether you can make money or not can be divided into short-term and long-term. Everyone who does ** knows that they have made money in the past. I have also lost money. >>>More
I'm from Huangqiao. The history of Huangqiao began in the Ming Dynasty. It now belongs to Taixing City. It has a population of 100,000. The town is 80,000 people. Huangqiao Baked Cake and Huangqiao Decisive Battle are both famous. Not sure what you want to know.
Go out and cut the tree axe plus three branches, add food and drink, hit 875, shoes, increase the ability to lay the line, look at the situation, if the wind is directly hy, if the wind is against the wind, the vanguard shield first, obscene money, pay attention to the control of the line, often pull the wild, the most important thing for the monkey is the efficiency of the money, this can refer to the clue monkey that **, out of the glow after the monkey's money comes quickly, you can out of the lost blade, flying shoes, dragon heart, vampire sacrifices, etc.