Which is better, system doors and windows or broken bridge aluminum?

Compared with broken bridge aluminum, the system doors and windows are better, such as water tightness, air tightness, wind pressure resistance, heat and sound insulation, etc. What I installed in my house is the system doors and windows, which were purchased in Red Star Macalline, the quality is very good and the after-sales service is guaranteed, and I don't understand to ask.

If the broken bridge aluminum doors and windows are the upgraded version of aluminum alloy doors and windows, then the system doors and windows are the performance upgrade of the broken bridge aluminum doors and windows. In fact, many people can't tell the difference between system doors and windows and broken bridge aluminum doors and windowsThe old carpenter Luban doors and windows analyze the topic of "system doors and windows or broken bridge aluminum"!

Stability

The system doors and windows have an independent technical department, which will carry out strict testing and inspection for each component of the system doors and windows, so the components are very well matched, not easy to fail, and it is often said that the stability is good. Broken bridge aluminum is assembled according to its own needs, and the stability is relatively not so good.

Glazing requirements

The system doors and windows must be made of tempered glass, while the ordinary broken bridge aluminum doors and windows can be made of tempered glass or ordinary glass; Therefore, the system doors and windows are upgraded products in the production process of ordinary broken bridge aluminum doors and windows, with finer workmanship, more solid and reliable, and the system doors and windows are comprehensive, so the system doors and windows are upgraded products in the production process of ordinary broken bridge aluminum doors and windows, with finer workmanship, more solid and reliable, and the system doors and windows comprehensively consider sound insulation, heat insulation, thermal insulation and sealing, energy saving and consumption reduction.

Flexibility

The components of the system doors and windows have been fixed according to different performance, with strong incompatibility, and the room for selection is relatively small compared with ordinary broken bridge aluminum doors and windows, so the flexibility is small. Ordinary broken bridge aluminum doors and windows can be configured according to their own needs, and the door and window materials can be selected by domestic and foreign manufacturers, and the mold can also be temporarily opened, which is more flexible.

Crafting process

Ordinary broken bridge aluminum doors and windows are mechanical group corners and do not inject glue; The middle stiff connection is fixed with screws; The system doors and windows are glued into the corners when they are at the corners of the mechanical group; Secondly, the pins are used in the middle of the connection, and the screws can not be seen on the outer surface of the window, and the system doors and windows are better than ordinary broken bridge aluminum windows in the production process.

Installation process

Ordinary broken bridge aluminum doors and windows are sealed with neutral silicone weather-resistant adhesive in the installation, while the system doors and windows are sealed with adhesive strip on-site installation method, which is to press a sealing strip on the glass frame after the glass is installed, and glass glue can also be used. Both installation processes can be used, but the system doors and windows are more considering the window isobaric, and more attention is paid to balancing the indoor and outdoor pressure in the design, and the water tightness and air tightness are more advantageous.

Generally speaking, broken bridge aluminum doors and windows are more energy-saving, soundproof, waterproof, fireproof and durable than system doors and windows.

The appearance of broken bridge aluminum doors and windows is more beautiful and suitable for various architectural styles. However, the ** of broken bridge aluminum doors and windows is relatively high, and you need to make a choice according to your budget and needs. Broken bridge aluminum doors and windows are a kind of high-grade doors and windows, which are made of aluminum alloy materials.

This technology can set up a thermal insulation strip between the inside and outside sides of the door and window to effectively isolate the transmission of indoor and outdoor temperatures, so as to achieve the effect of energy saving, sound insulation, waterproofing, fire prevention and durability.

The advantages of broken bridge aluminum doors and windows include:

1. Energy saving: The broken bridge insulation technology can effectively isolate the transmission of indoor and outdoor temperatures, thereby reducing energy consumption.

2. Sound insulation: The sealing performance of broken bridge aluminum doors and windows is good, which can effectively isolate noise.

3. Waterproof: The sealing performance of broken bridge aluminum doors and windows is good, which can effectively prevent rainwater from seeping into the room.

4. Fire prevention: Aluminum alloy material has good fire resistance, which can effectively prevent fire.

5. Durable: Aluminum alloy material has good corrosion resistance and wear resistance, and can be used for many years without failure.

The ratio of system doors and windows to broken bridge aluminum doors and windows is obviously better to use. The system doors and windows themselves are upgraded versions of broken bridge aluminum doors and windows, and the doors and windows have better performance. If the economy allows, the system doors and windows can really be, especially the high-end system doors and windows, which are very good in terms of appearance design, product quality and user experience!

Why are system doors and windows better than broken bridge aluminum doors and windows?

1. The doors and windows of the system can be customized according to the needs of users, and the home decoration effect will obviously be better. In addition, the individual components have been fixed according to their different characteristics, making installation easier.

2. The production process of system doors and windows products is very strict, first of all, after the mold opening, and then there are repeated tests and debugging stages, and finally through the third-party inspection, the product can enter the formal production stage.

3. The system doors and windows belong to the multi-cavity structure, which is superior in sealing, air tightness, compression resistance, sound insulation and heat preservation compared with the two-cavity structure of the broken bridge aluminum doors and windows.

4. The development technology of system doors and windows in China is mature, and there are many good brands to choose from. For example, Hennessy high-end system doors and windows, focusing on high-end system doors and windows customization, big brands, whether it is appearance design, product quality, service guarantee have done a remarkable job.

Broken bridge aluminum doors and windows and system doors and windows in the market in recent years, are very easy to use, I think Hennessy high-end system doors and windows are very easy to use, before listening to a friend who does home introducing, after the actual experience of decoration, quite satisfied.

System doors and windows can be understood as an upgraded version of broken bridge aluminum doors and windows, also known as energy-saving doors and windows, intelligent doors and windows, and customized doors and windows. It is a beautiful combination of performance systems, which needs to consider a series of important functions such as water tightness, air tightness, wind pressure resistance, mechanical strength, heat insulation, sound insulation, anti-theft, sun shading, weather resistance, operation feel, etc., as well as the comprehensive results of the performance of equipment, profiles, accessories, glass, viscose, and seals, all of which are indispensable, and then form a high-performance system doors and windows.

The difference between system doors and windows and broken bridge aluminum:

First, from the point of view of production cost.

A simple comparison can be found that whether it is a domestic system door and window or an imported system door and window, its cost and unit price are higher than that of ordinary broken bridge aluminum doors and windows. But you get what you pay for, and the system doors and windows are "expensive" in the tangible cost of profiles, hardware, etc., as well as R&D and design, later after-sales, comprehensive performance, etc. Its performance is excellent, easy to operate, and long time to use, so on the whole, the cost of system doors and windows is actually lower.

Second, from the stability and performance of the analysis.

The system doors and windows have their own independent technical department, which will carry out strict testing and inspection for each component of the system doors and windows, so the components are very well matched and not easy to fail, which is what we often say has good stability.

Third, from the perspective of sensitivity.

The components of the system doors and windows have been fixed according to different properties, and the notch structure, materials, etc. have strong exclusivity and incompatibility, and the room for selection is relatively small compared to the ordinary broken bridge aluminum doors and windows, so the sensitivity is small, but now the system doors and windows can be designed according to the needs to achieve "private customization".

Fourth, the production process.

Ordinary broken bridge aluminum doors and windows are mechanical group corners and do not inject glue; The middle stiff connection is fixed with screws; The system doors and windows are glued into the corners when they are at the corners of the mechanical group; The second is that the pins are used in the connection of the middle ting, and the screws can not be seen on the outer surface of the window, and the system doors and windows are better than ordinary broken bridge aluminum windows in the production process.

Fifth, the installation process.

Ordinary broken bridge aluminum doors and windows are sealed with neutral silicone weather-resistant adhesive in the installation, while the system doors and windows are sealed with adhesive strip on-site installation method, that is, after the glass is installed, a sealing strip is pressed on the glass frame, and glass glue can also be used. Both installation processes can be used, but the system doors and windows are more considering the window isobaric, and more attention is paid to balancing the indoor and outdoor pressure in the design, and the water tightness and air tightness are more advantageous.

The differences between system doors and windows and broken bridge aluminum are as follows:

1. Different properties: Broken bridge aluminum doors and windows are made of heat-insulated broken bridge aluminum profiles and insulating glass, which have the functions of energy saving, sound insulation, noise prevention, dust prevention, and waterproof. The thermal conductivity coefficient K value of broken bridge aluminum doors and windows is less than 3W·K, which is halved compared with ordinary doors and windows, reduces heating costs by about 30%, and has a sound insulation of more than 29 decibels, with good water tightness and air tightness, all of which meet the national A1 window standards.

2. Different stability: the system doors and windows have an independent technical department, which will carry out strict testing and inspection for each component of the system doors and windows, so the components are very well matched and not easy to fail, which is often said to have good stability. Ordinary broken bridge aluminum doors and windows are ordered to assemble different parts according to needs, and are temporarily integrated door and window products for a single project.

3. Different software: the system doors and windows provide design software, design manuals, procurement manuals, processing manuals, professional special equipment and technical service support while providing products, which is a complete industrial chain. The quality of ordinary broken bridge aluminum doors and windows depends on the level of designers and the processing and installation ability of door and window enterprises, which is relatively insufficient in support and follow-up services.

Precautions for the installation of broken bridge aluminum doors and windows:

1. When cleaning aluminum doors and windows, people must not step on the aluminum frame, nor can they pull the frame for support.

2. Sealing wool strip and glass glue are the key to ensure the sealing, insulation and waterproofing of aluminum doors and windows.

3. Aluminum doors and windows can be wiped with a soft cloth dipped in water or neutral detergent, and ordinary soap and laundry detergent cannot be used, let alone detergents with strong acid and alkali such as decontamination powder and toilet detergent.

System doors and windows are a perfect organic combination of performance system, need to consider water tightness, air tightness, wind pressure resistance, mechanical strength, heat insulation, sound insulation, anti-theft, sun shading, weather resistance, operation feel and a series of important functions, but also consider the equipment, profiles, accessories, glass, viscose, seals of the performance of the comprehensive results, indispensable, and finally form a high-performance system doors and windows. System doors and windows are engineering concepts, not product concepts, strictly speaking, not all broken bridge aluminum windows on the market can be called system doors and windows. So, what is the difference between system doors and windows and ordinary broken bridge aluminum doors and windows?

1.The production process is different: ordinary broken bridge aluminum doors and windows are mechanical group corners, and no glue is injected; The middle stiff connection is fixed with screws; The system doors and windows are glued into the corners when they are at the corners of the mechanical group; The second is that the pins are used in the connection of the door, and the screws can not be seen on the outdoor surface of the door, and the system doors and windows are better than ordinary broken bridge aluminum windows in the production process.

2.The installation process is different: ordinary broken bridge aluminum doors and windows are sealed with neutral silicone weather-resistant adhesive in the installation, while the system doors and windows are installed on site with adhesive strips, that is, after the glass is installed, a sealing strip is pressed on the glass frame, and glass glue is not used in the whole process.

3.The glass requirements are different: the system doors and windows must be made of tempered glass, while the ordinary broken bridge aluminum doors and windows can be made of tempered glass or ordinary glass; It is recommended to choose system doors and windows with third-class two-cavity low-e glass, so that the system doors and windows can reflect their real energy saving and consumption reduction.

4.The shipment volume is different: for example, the same two people are produced, ordinary broken bridge aluminum doors and windows can be shipped 30 square meters a day, and the production of 30 square meters of system doors and windows may take two days, the system doors and windows are slow and meticulous work, so the labor cost of system doors and windows is higher than that of broken bridge aluminum windows, and the system doors and windows are a cumbersome production process, which is more rigorous in production and processing.

In fact, there are a lot of differences, and Aowei doors and windows are briefly explained here, hoping to help you.

System doors and windows: is a perfect organic combination of performance system, such doors and windows need to consider a variety of performance, such as water tightness, air tightness, wind pressure resistance, heat insulation, sound insulation, anti-theft, operation feel, etc., but also in accordance with the overall solution requirements, consider the comprehensive results of the performance of equipment, profiles, accessories, glass, viscose, seals, and finally form high-performance system doors and windows.

Broken bridge aluminum doors and windows: Broken bridge aluminum is also called heat insulation broken bridge aluminum, heat insulation aluminum alloy, broken bridge aluminum alloy. It is a kind of heat-insulating aluminum material made of aluminum on both sides, and the middle is made of plastic profile cavity as a thermal insulation material, and the window made of broken bridge aluminum is called broken bridge aluminum doors and windows.

System doors and windows and ordinary broken bridge aluminum doors and windows are vividly compared to "brand computers", and "assembly computers", so we should better understand it, a simple comparison can be found that the cost and unit price of system doors and windows are higher than ordinary broken bridge aluminum doors and windows. But you get what you pay for, and the "expensive" system doors and windows are "expensive" in the form of profiles, hardware, etc., as well as R&D and design, post-service, comprehensive performance, etc.

What is the difference between broken bridge aluminum doors and windows and ordinary doors and windows, and which one is better? Those who don't understand are already regretting it.

The reason why the system is called a system is that from the beginning of research and development, it is a complete set of systematic research and development, and other materials such as profiles, hardware and other accessories are made to meet the demand.

The broken bridge window may be a system window, but the broken bridge window is not necessarily a system window, they have a certain overlap point.

Whoever can brag about it in this society is the system window