What are the Hi buttons and hi lights of Honor Router?

The functions are as follows: 1. One-click pairing and balancing segment: After the configuration of the Huawei main router that supports the Zhilian feature is completed, the Zhilian network with it as the core can be built.

If you bring a Wi-Fi device that supports the Smart Connection feature (not configured and in the factory state) close to the Huawei router and power it on, the Huawei router will detect the Wi-Fi device with the Hi light and automatically flash orange to block the device.

At this time, press the HI button, the HI light will turn into orange flashing, and the "Zhilian - One-key Pairing" function will be activated. Wait for the Hi light to turn solid on, indicating that the new Wi-Fi device has joined the Smart Connect network.

2. WPS: When the Hi light is always on, press the Hi button and the WPS button of other Wi-Fi devices in turn within two minutes to start standard WPS negotiation and connect the Wi-Fi device to the Wi-Fi network of HONOR Router in turn.

3. Factory reset: In any case, press and hold the HI button for more than 10 seconds, and release it after the HI light goes out to restore the factory settings.

The red light of the Hi button of the Honor router indicates that there is a problem with the optical interface of the router.

There is a problem with the optical interface of the router and the router needs to be replaced. Plug the connector in and it can be restored. The bend of the optical fiber in the indoor part is too large.

It is the device "network card failure", not bright means "no connection" or "the code can't tell the device" line refers to the signal, or when the signal of the Internet feedback passes through modern, data refers to the data, including the core wifi, etc., always on represents the wireless signal, generally the wireless signal will be always on when the router is turned on, and flashing means that there is a device connected to the network through wifi.

Re-plug the network cable once, connect the network cable from the router to the WAN port of the wireless router, and re-set the wireless router, if it still doesn't work, the computer is connected to any LAN port of the wireless router, reset the wireless router (restore the factory), and after a while, the wireless router is turned off and turned on.

Introduction to HONOR Routing:

Honor Router takes the elegant life of consumers as the ultimate demand, and completely abandons the design of the external antenna of the traditional router in terms of appearance design, and the body size is only 9cm*9cm*9cm, which is extremely simple and user-friendly to set up. The built-in pair of dual-band balun antennas has good Wi-Fi coverage and powerful hardware parameters: equipped with HiSilicon's dual-core ARM-based 1GHz main chip, it not only improves performance by more than 2 times, but also has a better energy efficiency ratio than traditional MIPS architecture chips.

3 Full features are as follows:

1. One-click pairing: After the configuration of the Huawei main router that supports the smart connection feature is completed, the smart network with it as the core can be built. If you bring a Wi-Fi device that supports the Smart Connect feature (not configured and in the factory state) close to the Huawei router and power it on, the Huawei router will detect the Wi-Fi device with the Hi light and flash it orange automatically.

At this time, press the HI button, the HI light will turn into orange flashing, and the "Zhilian - One-key Pairing" function will be activated. Wait for the Hi light to turn solid on, indicating that the new Wi-Fi device has joined the Smart Connect network.

2. WPS: When the Hi light is always on, press the Hi button and the WPS button of other Wi-Fi devices in turn within two minutes to start standard WPS negotiation and connect the Wi-Fi device to the Wi-Fi network of HONOR Router in turn.

3. Factory reset: In any case, press and hold the HI button for more than 10 seconds, and release it after the HI light goes out to restore the factory settings.

Advantages: MB DDR3 large memory ensures stable connection between multiple devices.

The Hi button is a signature button of Huawei routers that support the Zhilian feature, which mainly provides the WPS Zhilian one-click pairing function, and the Hi light is used with the HI button, and the functions are as follows:

Smart Connection: After the configuration of the Huawei main router that supports the smart connection feature is configured, the smart network with it as the core can be built. will be supported.

If a Wi-Fi device (not configured and in the factory state) is close to the Huawei router and powered on, the Huawei router will detect this with the HI light.

Wi-Fi devices and flash orange automatically. At this time, press the HI button, the HI light will turn into orange flashing, and the "Zhilian - One-key Pairing" function will be activated. Be patient hi

When the light turns solid, the new Wi-Fi device has joined the network.

WPS: When the HI light is always on, within two minutes, press the HI button and then the WPS button of other Wi-Fi devices to start the standard.

WPS negotiation to connect the Wi-Fi device to the Wi-Fi network routed by HONOR.

Factory reset: In any case, press and hold the HI button for more than 10 seconds, and release it after the HI light goes out to restore the factory settings.

The H (or Hi) button is a signature button of the HONOR brand router that supports HiLink intelligent connection technology, and mainly supports the following functions:

HiLink Smart Connection: You can network two smart routers with one click to expand the network through the H (or Hi) button, or you can connect smart home products such as TV boxes that support HiLink smart connection to the router's Wi-Fi with one click to build a smart home network (hotspot automatic switching, wider signal coverage).

WPS: The H (or Hi) button also has a WPS button function.

Factory Reset: The router can be factory reset with the H (or Hi) button.

1. There are a total of 4 types of HI light colors and flashing: green light is always on, orange light is always on, orange light flashes slowly, and orange light flashes quickly.

2. There are 2 types of HI buttons: within 10 seconds; More than 10 seconds.

The corresponding functions are as follows:

1. When the green light is always on or the orange light is always on, press it once (that is, within 1 10 seconds) to start WPS.

2. When the orange light flashes slowly, press it once (i.e. within 1 10 seconds) to start the HiLink one-key connection.

3. In any case, press and hold until the light goes out (i.e. more than 10 seconds), and the device will be restored to the factory.