What is a CE interface, what is a CF interface, and what is the difference between the two

1.Both are interfaces to hardware devices.

2.Both interfaces are now widely used in mobile devices such as portable hard drives.

3.Background: A number of hardware vendors, including Intel, Hitachi Global Storage Technologies, Marvell Semiconductor, Seagate, and Toshiba Information Systems USA, have proposed a new hard drive interface for mini hard drives, called CE-ATA; The CF interface is similar to the CE interface, which is part of the ATA series and is mainly used in PDA and other equipment.

Addendum: I know it's still you. Without further ado, let's see what I add to your question later.

Both of these are interfaces for hardware devices, and both are widely used in mobile devices such as portable hard drives.

CF is a universal standard that integrates an IDE controller. The foot position is defined the same.

The hard disk you are talking about should have three types: CF interface, CE interface and IDE interface.

Both CE, CF and IDE interfaces are integrated IDE controllers. All of them can be directly converted to a standard IDE through the riser card, and no signal conversion is required.

But with CF card mounting system, WinXP is feasible.

However, some chips are limited to 500 writes, and it is estimated that they will break quickly.

Spend 70,000 yuan to buy 60 mobile phones, see who is strong and who is weak in mobile chips?!

The difference is that:

is an analog interface, and DVI is a digital interface.

In terms of data transmission, the amount of data is larger, and there is basically no loss. The analog method will have a large loss, and at the same time, the display effect will be a little worse than the digital method.

DIV interface: DVI interface is a high-speed transmission of digital signal technology invented by the Digital Display Working Group (DDWG) established at the Intel Developer Forum in September 1998, with three different interface forms: DVI-A, DVI-D and DVI-I. DVI-D only has digital interfaces, DVI-I has digital and analog interfaces, and the current application is mainly DVI-I (24+5).

Interface for 5400 rpm HDD. You can remove the optical drive and replace it with a serial port of the laptop hard drive, so that the speed will go up.

This is not the model of the hard disk, so you can't see what interface the hard disk is from this, you can right-click "My Computer" - Management - Device Manager - double-click in front of "Disk Drive"."+"Follow this step to find out what model your hard drive is. Then you send out the hard drive model again, and I'm helping you see what the interface is! Hope it helps!