Burning software ONES 2 1 358 Burning system xp system disc, how to burn it?

2. Put the blank burning disk into the recorder, start ones, select the common image to burn, select the folder where you store the system image from the network from the file path, select the file, and the file suffix is ISO

3. Set the burning speed to 16x or lower, otherwise it is easy to appear Frisbee, burning failure, and then click burning.

4. Congratulations, you have a system disk.

But this is not the best solution, it is recommended that you use a USB flash drive to make a boot disk, decompress the image file from the Internet, and propose it from it, (the name of this file may be different, just remember to copy the largest one in the folder after extraction) Copy it to the USB flash drive, and you will have a system recovery disk that you can carry with you.

1.If you have a backup image file on your computer, you can engrave it into a CD. Choose to burn the disc image when burning.

2.If you don't have a backup file, you can also copy your system files and make an image file with ones, or get an image file through GOST backup.

3.The system can be downloaded online, it is best to go to the regular **, and it will also screen the quality of the system, because some systems may be implanted by others with viruses, or the system cannot be used.

XP system disk must be started by a disc,The Internet is basically the ghost version,**After that, you need to use a USB flash drive to make a USB flash drive to start,Then copy the ghost file to the USB flash drive。

If you want to burn, it is best to borrow an XP self-booting disc from the computer city or someone else, and then make a copy of the CD. **Ghost version, if engraved into a data disc, will not be automatically launched by the disc.

Burn common images, I have this.

1.To copy a disc, you need to have two optical drives, and burn the disc in one optical drive directly to the blank disk of the other optical drive.

2.Data discs, that is, ordinary file burning, burn files directly into the disc. (It can be simply understood as copying files directly to the CD, similar to a USB flash drive).

For example, if you have a backup file that you want to burn to a CD, you can burn the file directly in File Burning.

3.Burn a disc image. Burn a file in di format (which appears to be a disc image under Linux) to a CD.

4.Burn common images. Burn disc images in ISO, BIN, IMA, UDF, BIN format to CD. (Note that not all bin files are disc images).

5.Burn the bin cue image. Burn bin cue files to discs, mostly used when burning **.

Bin here refers to a mirror format, most of the time it is ** (similar to ape cue** format), if cue and bin are together, cue mainly provides bin's track information, which is very common when ****).

1. Use nero8 for early correction and burning software

2. If the computer is win7 system, you can copy the file directly to the CD;

2) If the optical drive supports the burning function, you don't need to buy a recorder, if you don't support it, you can buy another recorder.

4. Start Nero--- select "Rip & Burn" -- Burn Audio CD -- Add "Audio--- select the burning speed (generally choose 6 - 12 times the speed) -- Burn --- end. Note: To use a blank CD disk to burn in VCD, ***, do not burn a disk with ***.

Lu Yuan. 5. Burning CD is suitable for APE format, which is a lossless format.

At present, the smallest green bend engraving bridge recording software makes a fuss --- ones burning system tutorial.

First upload the next system image from the network, and then engrave the image in the application.

The system's built-in burning function is very simple and will not be used by ordinary people. Install a professional burning software, such as Nero Disc Burner, which is fully functional, intuitive, and free. It is recommended that you burn discs with burning software.

As for the burning software that can't be burned, if you rule out the problem with the software, it may not be the right way to use it. Try the following methods with Disc Burn Master:

Put the *** blank disc into the recorder. Open the software, select "**Tools", select "Make Film and Television Disc", and set the type of disc to be burned. The default is ***** disc.

Disc Burning Master Edition Burn**CD Disk: Put in a mid-range CD disc (only CD disks can be used), open the software, select "Burn**CD", the default is to burn**CD disc. Click "Add" to add the files you want to burn.

After adding, click Next, select the burning device, check "Automatically adjust the volume before burning", set the disc burning parameters, and click "Roll the noisy manuscript to start burning".

Burn a data disc with a CD: Open the software, select "Burn Data CD", select the disc type, *** CD or CD CD, click "File" (or directory), and add the file. Next, select "Target Device" (i.e. Recorder), enter the burning parameters, and click "Burn".

Disc Burning Master Edition Burn*** Disc: Put in a blank disc. Open the software, select the burning tool Burn**CD Select*** CD***, add files - Next - check Automatically adjust the volume before burning - select the burner - start burning.

Click on the VCD item in the "Please select the type of disc you want to make", and the other options can be defaulted. Next, click "Add" to add ** material, next, burn settings, next, enter burning.

Burning a disc isn't just a matter of looking at the system!

Also look at your *** drive by no burning feature!

Nowadays there are a lot of *** drives that are not burned with the feature! This seepage difference.

So they shouted that the finch could not burn the disc!

When you buy your own computer! You can ask the merchant to help you change the function drive with burning!

Find out if your computer has a burning function!

Let's use a USB flash drive now. No one uses the disc anymore.