What does the interior renovation project include

1. Civil engineering transformation: according to the plan, the trunking, the bottom box and the wall are demolished.

2. Hydropower concealment project: divide the strong and weak electricity into charge, divide the items, and arrange the slots, and then use the steel wire to thread.

3. Mud engineering: after the waterproofing is done, the 48-hour water shutdown test, the paving of wall and floor tiles in the kitchen and bathroom, the ground leveling, and the concealment of the line pipe.

4. Woodworking engineering: local ceiling, modeling treatment, cabinet production.

5. Paint engineering: putty leveling three times, sandpaper sanding, rolling primer, then brushing twice topcoat, and then polishing.

6. Installation engineering: installation of lamps, sanitary ware, switches, panels, and hardware pendants.

7. Cleaning: After the cleaning is completed, notify the owner for acceptance.

Decoration engineering is mainly divided into interior decoration engineering and outdoor decoration engineering, and the two have different directions.

1. The interior decoration project mainly includes: decoration division - ceiling, wall, ground decoration, wood modeling, painting and other installation parts, as well as water and electricity line laying, air conditioning pipeline ventilation pipeline laying, weak current line and point setting, waterproofing, lighting and sanitary ware installation, etc.

2. Outdoor decoration projects mainly include: exterior wall decoration, usually constructed with stone, aluminum-plastic panels, glass or exterior wall coatings according to the different requirements of the design. The scope other than the scattered water of the main body of the building belongs to the construction scope of the garden landscape.

3. There are too many details of decoration projects, and the above is a big subheading. After the completion of the main body of the building, the beautification works carried out inside and outside the main body (except for the garden landscape and fire protection installation) basically belong to the category of decoration and decoration projects.

Article 1 Basic Requirements.

1. Basic procedures.

1. Interior decoration should comply with the following basic procedures:

1) The living room, bedroom, and office should be topped first, then the wall, and then the ground;

2) The kitchen, bathroom, and boiling water room should be waterproofed first, and then the wall, the top, and the ground should be back.

3) Interior decoration construction should be carried out in the order of first concealed engineering, intermediate engineering and finishing engineering.

4) The next process should be completed after the construction of the previous process and the acceptance and meet the design requirements, and then carry out the construction.

Second, the basic requirements of the material.

1. Material procurement requirements.

1) The purchased materials must have quality inspection certificate, environmental protection inspection certificate, product packaging or labeling with Chinese product name, specification, model, manufacturer, address, product expiration date, must meet the relevant national environmental protection standards, health standards and fire protection standards.

2) When purchasing materials, testing equipment such as water measuring instruments must be used to test product quality;

3) When purchasing materials into storage, acceptance work should be done.

2. Material storage requirements.

1) The inventory materials must be stacked neatly and kept by special personnel;

2) Wooden materials must be stored in a dry and ventilated area, and do a good job of fire prevention, waterproofing and insect prevention;

3) Inventory materials must be first-in, first-out to reduce backlog.

3. Requirements for the issuance of materials.

1) The material salesman organizes the distribution of materials according to the shipping order;

2) Inventory materials must be first-in, first-out, and the inventory backlog caused by material quality should be dealt with in a timely manner;

The home improvement construction content mainly includes the following projects.

1. Demolition project: remove some non-load-bearing walls, door openings, redundant structures, etc.

2. Hydropower engineering: including the rearrangement and construction of water supply pipes and drainage pipes; The circuit circuit is re-set, the switches, sockets, and lamps are re-positioned and wired, and special lines are set up.

3. Ceiling engineering: including all ceilings and various decorative shapes on the top.

4. Wall engineering: including wall base treatment, painting and emulsion paint, etc.

5. Ground engineering: including the installation of wooden floors, floor tiles, composite floors, and baseboards.

6. Furniture engineering: including large wardrobes, bookcases, TV cabinets, cabinets, shoe cabinets, desks, wine cabinets, etc.

7. Door and window engineering: including the production and installation of doors and windows and the package of door and window covers.

8. Painting engineering: including all kinds of painting construction for all decoration projects.

9. Installation engineering: including range hood, fan, refrigerator, vegetable washing basin, basin, sanitary ware, lamps, electrical appliances, air conditioning, etc.

Interior decoration mainly includes the following contents: the main types of construction work for interior decoration are demolition workers, plumbers, masons, carpenters, painters, followed by the design of interior decoration, the purchase of main materials and auxiliary materials. The precautions for interior decoration are: to learn to rationally operate the use and combination of colors in decoration, to understand the different properties of different colors, to understand how each color should be matched and the symbolic meaning of color.

It is necessary to understand the calculation method of the cost of materials, equipment, machinery and labor in interior decoration, and grasp the importance of construction budget, so that the house can be decorated as well as possible within the limited cost range.

Including 1. Demolition of walls, laying of water pipes, circuits and heating.

2. Do a good job of waterproofing the kitchen and bathroom, and the closed water test shall not be less than 48 hours, and the follow-up process shall be carried out after passing.

3. Laying of wall tiles and floor tiles. If it is a wooden floor, it is done at the end of the renovation.

4. For wall treatment, batch wall, brush paint, paint can be designed into different colors, brush paint at least 2 times.

5. The production of ceilings, furniture and other indoor woodwork.

6. Installation of finished products such as cabinets, wall cabinets, bathroom cabinets, toilets, doors, etc.

9. Installation of lamps and curtains such as chandeliers in the living room.

The contents of interior decoration design have the following contents:

1.Partition of space and division of areas:

A very important aspect of decoration design, it is particularly important to carry out reasonable zoning and space division for those new houses with unreasonable layout and frame structures that can be divided by themselves. Living rooms, bedrooms, kitchens and bathrooms and other rooms can only be convenient if the space is reasonably distributed. In addition, after the function of each room is determined, the specific design can be carried out according to the characteristics of each room.

2.Practical and functional design:

For example, the kitchen needs to design a variety of cooking utensils, cabinets, stoves, refrigerators, layout, so that the kitchen is handy, and other rooms should also be designed according to the actual needs of use to meet their respective functional needs.

3.Furniture design:

The shape and placement of furniture also have a great impact on the decoration effect, because their volume is usually larger; At the same time, the furniture also has practical functions, must conform to the principle of ergonomics, if the design is not reasonable, it will be inconvenient to use. Making your own furniture in the decoration can make full use of the space and can also be integrated with the overall style. If you plan to buy finished furniture after decoration, you should also consider the shape and color of the furniture in advance when designing, so as not to destroy the overall style.

Interior decoration is the decoration that each of our families pay more attention to, and the interior decoration and repair contains a lot of content, the indoor environment is very important for a family, and many people do not know too much, so next, we will introduce it to all of youInterior decoration contents1. What are the contents of interior decoration?

1. Spatial image design is to deal with the internal space provided by the building, reprocess the internal space defined by the building, and re-delineate it on the basis of the existing space scale. Without violating the basic principles and ergonomic principles, the relationship between scale and proportion is reinterpreted, and the system of the renovated space is better understood.

First, the problem of contrast and the connection of the surface line body should be solved.

2. Interior decoration design is mainly for the six interfaces of the internal space of the building, according to certain design requirements, for secondary treatment, that is, the treatment of the ceiling, wall, and ground, as well as the treatment of the internal interface of the entity and semi-entity of the divided space. If possible, the building interface itself can also be processed.

3. Indoor physical environment design, this part of the content is mainly the design of the quality and regulation of the indoor space environment, mainly the design and treatment of indoor somatosensory climate: heating, ventilation, temperature regulation, etc., which is an extremely important aspect of modern design, and is also a part of the "people-oriented" idea of design. With the development of the times, the humanized design and construction of the artificial environment has become the standard to measure the quality of the indoor environment.

2. Interior decoration design.

1.Space design.

Space design is a reasonable plan to achieve the effective use of space. The basic design idea is to plan and design the space according to the functions and special requirements of the different areas, and to make full use of the overlapping potential of the space and the versatility of the furniture. In addition, it conducts a thorough and careful review of colors when developing lighting plans for lighting, light sources, and light distribution.

2.Color design.

The color design is designed to accentuate the personality of the room's décor. The design of the living room should be based on color. The walls, floors, furniture, and pendants in the house should be coordinated with the main colors to match the design style and features of the house.

3.Equipment design.

The device is designed to provide convenience and comfort to life. The key is to consider the design, configuration, and layout of the device, as well as the durability and updability of the device. It generally includes the following:

All kinds of electrical equipment, air conditioning, hot water equipment, ventilation equipment, sanitary equipment, kitchen equipment, etc. Si Liang You.

4.Surface design.

The surface design is designed to create the basic atmosphere of the living room. It is often used to decorate various decorative materials (such as carpets, floor tiles, floor leather, wallpaper, latex paint, etc.). The content includes the floor (including stairs), walls, ceilings, etc.

The above content is an introduction to the interior decoration content and interior decoration design.