There are no points for new registration, please ask for a good Samaritan! Problems with the compute

If you don't hear the drip sound to prove that your motherboard has a link in addition to the county problem, the computer self-test to this link when there is a problem, there will naturally be no drip sound. The self-test is not normal, what else is the machine on? It may be a problem with the power supply line of the motherboard, or it may be that the electrical components on the motherboard cannot work properly due to aging, resulting in problems during self-testing, which in turn leads to the inability to turn on.

As for the motherboard, you don't need to repair it if it's broken, and chip-level maintenance is time-consuming and costly, just replace it with a motherboard.

You turn on the computer and see if everything is plugged in.

My machine used to be like this, I didn't know the reason, and then I found out that it was caused by poor contact of the memory module, maybe your machine has been in time for a long time, and the things inside are aging. My machine is because the memory module is in poor contact, so the system fails the self-test before booting, and there is no drop. Later, I changed the memory module.

On the above problems, there is a problem with the opening key of the computer, you have been using it for three or four years, due to the frequent switching, aging phenomenon, it is very simple, the replacement of the switch is good, of course, it is a computer professional.

It's not a problem with the virus, clean up the dust, change the switch wire, and mainly clean up the power interface and memory interface.

Let's talk about the drip first, that brother is a boot self-test. Then your computer doesn't have that sound, saying that the name self-test is not normal, it is recommended to look at the motherboard, generally the motherboard power supply and other problems.

Then reinstall the program and give it a try

I think it's the sound of the CPU fan, you need to clean the dust. There are many reasons why you can't turn on the phone, and the memory module can't be turned on if it's not plugged in.

Too little is described, what kind of sound is it, a continuous "drip" sound, or the "hum" of wires rolled into a fan.

Suggestion: If it is a "Didi" sound, open the case, unplug the memory, graphics card, etc., and put it on.

If there is a "buzzing" sound, open the case and tidy up the messy wires so that they don't get caught in the fan.

If it doesn't work out, go to IT** to take a look. Remember to unplug the wire when operating.

Maybe the fan is broken, and the temperature inside is too high and it burns out! I've had this issue as well.

Windows files are missing. If you don't have any important files on your computer's system disk, reinstall it. If you have important files, buy a Windows fully installed CD. It's OK to fix it with a disc.

Some of the system's files are corrupted, or lost, not a big problem.

It should be a lost or corrupted file, if you have a disk, you can redo it.

Is your computer installed?

Help you register,:2051452146, the password is your password.

The CPU cost performance of the i3 is still okay, and the core graphics are enough for ordinary applications.

Play games, if you can't keep up, you can add a graphics card of about 500 yuan.

No matter how high it is, it is not recommended.

It's OK, it's an upper-medium configuration.

So-so, it's still good if you don't play any big games.

It's not good to hold up 2500 yuan, if you want to use it for online chat, you can still do it.

Xiqing second-hand house.

The main consideration is the stroke, the maximum load of the sensor, the accuracy of the sensor, etc.

The first step is to determine the maximum force you need. Then decide if you need to configure your PC.

Shanghai Tilt Technology Instrument Technology **** physical testing expert.

OEM genuine.

Right-click on Set Compatibility Mode and run it as an administrator v system issues.

Yes, on the back of the computer, there's a pink label that says your computer's system and system key at the factory.

Right-click and use the administrator to see if it can run, if it can't run, you have to change to XP.

Before changing XP, you can carve a set of reply discs out of the specific steps, you call the customer service**, and he will tell you.

2766268156 Password 123456There is a dot behind the password, and you can change the rest of the information yourself. There is no secret protection, so I act quickly when I see it, and I don't care if someone else changes it.