What is the detailed difference between general plastering and decorative plastering in construction

Plastering and scraping putty.

It is a process or step to treat the wall, and they can also make the wall more beautiful or stable. Some people think that plastering and putty scraping are the same type of thing, so it is natural to compare them and want to understand the difference between plastering and putty scraping before deciding to decorate on their own.

The difference between plastering and putty:

First of all, plastering is divided into architectural plastering and decorative plastering. But the main role is to cover up the ugliness. And scraping putty is mainly used for leveling. Generally, no surface layer is made.

Plastering materials need to be added with aggregates such as sand.

Therefore, the plastering is thicker and used for the preliminary leveling of the wall, while the putty does not add aggregate, the material is delicate, and the single layer is very thin, which is used for final leveling.

Introduction to plastering and scraping putty

The plastering of the wall refers to the use of lime mortar, mixed mortar, polymer water mortar, hemp knife ash, paper bar ash, and thermal insulation mortar.

granules and other processes for plastering and gypsum slurry covering the surface of the building, or the ground.

Cement. Dispose. The plastering is mixed with cement or white ash and sand and water and then plastered on the wall with a trowel, and the thickness of a single layer is 5-20 mm.

Scraping putty refers to the most important step in the treatment of the base layer by filling or overall treatment to remove the uneven part of the surface of the base layer and keep the wall flat and smooth. One of the ways to scrape putty interior wall decoration, specific method: scrape putty on the wall to ensure that the wall is flat.

Generally, scrape three times, and after drying, polish it with sandpaper. The step is applied to latex paint.

Proceed. Putty (mud filling) is a decorative material that flattens the surface of the wall, and is a kind of thick paste coating.

It is an indispensable product before paint painting. It is applied to the primer or directly to the object to remove uneven defects on the surface of the object to be coated. Batch putty is to use a scraper or trowel to mix cement or putty with water and then wipe it on the wall, and the thickness of a single layer is generally not more than 1 mm.

What is the relationship between plastering and scraping putty?

Plastering and putty scraping is the relationship between before and after the construction process. Plastering in the front, scraping putty in the back.

Wall plastering refers to the plastering of cement mortar on the wall.

Mixed mortar, white mortar surface layer engineering, belongs to civil engineering.

Scraping putty is the most important step in the treatment of the base layer by filling or overall treatment on the basis of plastering, removing the uneven part of the surface of the base layer and keeping the wall smooth and smooth, which belongs to the decoration project.

The difference between plastering and scraping putty is as above, plastering and scraping putty have differences and connections, but they are all processes to be used in decoration construction, and it is not enough to choose one of the two. When plastering and scraping putty, the experience of the builder will also have a direct impact on the effect it creates, so it is necessary to find a professional cement master when plastering and scraping putty, so that the plastering and putty scraping can be completed well, so that the wall decoration can show better results.

Generally, plastering and decorative plastering belong to the same building decoration and decoration division project.

The plastering sub-division works are two different sub-projects.

General plastering refers to cement mortar, lime mortar, mixed mortar, and polymer cement mortar.

hemp lime, paper lime, gypsum ash, etc., divided into ordinary and high-grade;

Decorative plastering refers to the brushed stone, cut fake stone, dry clay stone, false brick, etc., in which the construction deviation of the brushed stone and the fake stone surface is required to be the same as the advanced plastering index in the general plastering.

The plastering of the construction site is required according to the inspection batch, and the home decoration is much stricter, the materials are not the same, and the effect is not the same

The difference between basic plastering and general plastering is in **pro! Hello, glad to answer for you. The difference between foundation plastering and general plastering:

1. Different properties 1. Wall plastering, as the name suggests, is to brush cement or mixed mortar on the wall and other surface layer engineering. 2. As the name suggests, the wall decoration plastering rolling mu is to brush water sand, dry clay stone and fake bricks on the building wall. 2. Different functions 1. Wall plastering has good moisture-proof, windproof and heat-insulating functions to prevent the wall of the building from being eroded by wind and snow.

2. Wall decorative plastering can be improved through technology, materials and other aspects to make the plastering more decorative. 3. Different application materials 1. Wall plastering is mainly made of cement, white ash and sand. 2. Wall decoration plastering, including water grinding leakage stone, false face brick, water accompanying stone, mechanical spraying and roller coating, etc.

General plastering method (1) base treatment: clean up the dust, dirt and unevenness in the base layer. And nail a layer of metal mesh at the interface of different structural substrates to prevent cracks.

2) Bottom plastering: The thickness is 5 to 9 mm, so that the plastering layer can be firmly connected to the base layer and help with leveling. (3) Middle layer:

The main purpose of plastering the middle layer is leveling, with a thickness of 5 to 12 mm, and to do a large search for standard reinforcement. (4) Surface layer: the thickness is 2 to 5 mm, and its main purpose is decoration, so it must achieve a flat surface.

Hope mine can help you! Do you have any other questions?

The main differences are, different properties, different functions, and different application materials, as follows:

First, the nature is different.

1. Wall plastering.

It refers to the surface layer of cement mortar, mixed mortar and white mortar on the wall.

2. Wall decoration plastering.

It refers to the smearing of water sand stone on the wall of the building, cutting fake stone, dry clay stone, fake brick, etc.

Second, the role is different.

1. Wall plastering.

It has the functions of moisture-proof, weatherproof, heat insulation, etc., and avoids the erosion of the building wall by wind, rain, snow, etc.

2. Wall decoration plastering.

It is through the improvement of operation technology and materials to make the plastering more decorative.

Third, the application materials are different.

1. Wall plastering.

Mainly cement, white ash, sand, etc.

2. Wall decoration plastering.

It mainly includes brushed stone, dry clay stone, masquerade brick, water accompanying stone, cutting fake stone, brushing and strip ash, as well as mechanical spraying, elastic coating, roller coating, color plastering, etc.

Difference: Generally, after plastering, latex paint, melamine and so on should be brushed, while decorative plastering can be directly used as the most surface layer of building decoration, such as cutting fake stone, terrazzo surface layer, and brushed stone.

Plastering engineering refers to the systematic construction process of applying plastering mortar to the surface of the substrate material, which has the effect of protecting the base layer and increasing the aesthetics, and provides special functions for the building.

The plastering project has two major functions: one is the protection function, which protects the wall from the erosion of wind, rain and snow, increases the ability of the wall to prevent moisture, weathering and heat insulation, and improves the durability and thermal performance of the wall; The second is to beautify the function, improve the indoor sanitary conditions, purify the air, beautify the environment, and improve the comfort of living.

The similarities are all plastering.

The difference is that one is for the protection of the wall, for the use; One in front of the basically, also adds a decorative effect.

In this way, the difference will naturally come out.

Actually, you can literally break out basically all the content.

1. They are different in nature.

Ordinary plastering belongs to the kind of smooth and clean surface, and at the same time the seams are smooth; Advanced plastering is a smooth and clean surface, uniform color, no plaster, and the gray line is straight and square, clear and beautiful.

2. It is different in thickness.

For high-grade plastering, it needs to be between 25mm, and it belongs to high-grade ash when it reaches this standard; For ordinary plastering, it is lower than high-grade plastering, only 18mm is needed;

3. Different in provisions.

Compared with ordinary plastering, advanced plastering has higher requirements for material standards and design, and at the same time, each adhesive layer must be firmly pasted.

The question is not professional at all, the plastering project is divided into general plastering, thin insulation plastering, decorative plastering and clear water masonry joints, and general plastering is divided into ordinary plastering and advanced plastering.

According to the standard grade of construction acceptance.

1.Concept of plastering works:

Plastering is to apply various mortars, decorative cement and stone mortars to the walls, floors, ceilings and other surfaces of buildings.

The plastering project is the most direct and initial decoration project.

2.Composition Plastering is generally divided into three layers, namely the bottom layer, the middle layer and the surface layer, and the bottom layer mainly plays the role of bonding and preliminary leveling with the base layer; The middle layer plays the role of leveling; The surface layer plays the role of decoration.

3.Classification of plastering:

Plastering projects are divided into general plastering, decorative plastering and special plastering according to the materials used and decorative effects. �

The materials used in general plastering are: cement mortar, cement mixed mortar, polymer cement mortar, expanded perlite cement mortar, lime mortar, hemp knife ash, paper gluten ash, gypsum ash, etc.

The bottom and middle layers of decorative plastering are the same as general plastering, but the surface materials are different, and the surface materials of decorative plastering mainly include: cement stone slurry, cement color paste, polymer cement mortar, etc.

Special plastering refers to the plastering carried out by using thermal insulation mortar, acid-resistant mortar, waterproof mortar, etc. in order to meet some special requirements (such as heat preservation, acid resistance, waterproofing, etc.).

General plastering is different from decorative plastering, generally speaking, the materials used in general plastering are simpler than the materials used in decorative plastering, from the current situation of most construction engineering plastering, all choose to use general plastering, so it can be said that the scope of general plastering is more extensive. The following is an introduction to the main content of the difference between two levels of plastering in general plastering projects brought by the construction network for reference.

In general, lime mortar, cement mixed mortar, cement mortar, polymer cement mortar, expanded cement mortar and hemp knife lime, paper tendon lime, lime plaster, etc. are mostly used in plastering, and the range of use can be in any Li Cong mold wall indoors and outdoors.

In the general plastering construction, according to the different requirements for the quality of wall plastering, it is often divided into two levels of ordinary plastering and advanced plastering, literally we can realize that there is a relationship between the depth of work between ordinary plastering and advanced plastering, and in the current construction specifications, the sensory quality of these two levels of plastering makes different requirements.

The surface of ordinary plastering should be smooth, clean, and smooth, and the lattice seams should be clear.

The surface of the high-grade plastering should be smooth, clean, uniform in color, no trowels, and the lattice seams and gray lines should be clear and beautiful.

Not only that, in the actual quality inspection, it is necessary to use inspection tools to inspect the general plastering surface layer, and the results of the inspection are based on the specific value of the allowable deviation, and the allowable deviation is not the same for ordinary plastering and advanced plastering.

Through the above, we can see that the so-called "two-level" plastering, mainly the depth of the work is different, resulting in different sensory effects and allowable deviations, more popularly, in the general plastering project, the quality requirements of senior Zheng Accompany plastering are stricter than the quality requirements of ordinary plastering, which is the biggest difference between the two.

Although we already know the difference between high-grade plastering and ordinary plastering, which level of plastering should be used in the actual construction? To this end, the current construction specifications clearly stipulate that the plastering grade should be determined by the design unit in accordance with the relevant provisions of the state, according to the technical, economic conditions and decorative and beautiful requirements, and indicated in the construction drawings, if the design is not required, it can be constructed and accepted according to the ordinary plastering. Which slow.

<><1. The nature is different.

General plastering is the surface layer work of brushing cement or mixed mortar on the wall. Decorative plastering is the brushing of water sandstone, dry clay stone, and masquerade bricks on the walls of buildings.

2. The effect is different.

General plastering, the spring wheel has good moisture-proof, windproof, and heat-insulating functions to prevent wind and snow from eroding the building wall. Decorative plastering, through the improvement of technology and materials, can make plastering more decorative.

3. The materials are different.

General plastering, it is mainly composed of cement, white ash and sand. Decorative plastering, including terrazzo, ** bricks, water companion stones, mechanical spraying and roller coating, etc.

What to pay attention to in wall plastering.

1. All materials must meet the requirements during the construction of wall plastering, and each layer of plastering must be firmly bonded, and there shall be no defects such as delamination, gaps, and cracks. The size of the hole and groove should be well designed, and it should be square and neat, and the plastering should be uniform after the pipe.

2. The slope of the waterline and the drip groove should be correct, the drip line should be straight, and the depth and width of the drip groove should be less than 10mm, so that it is clean and consistent.

3. According to the baseline of the wall, hang it vertically on the corners, buttresses and walls of doors and windows, and add square plastering cakes to fill the ribs in the wall and control the flatness of the wall.

4. When plastering the bottom layer of mortar, the ribs should be filled, smoothed layer by layer, and scraped with a big stick, and the pile should be fixed with a wooden trowel, and the first layer should be 12mm thick and cement mortar should be used.

5. The depth and width of the grid bar must be the same. After the foundation treatment is completed, the surface is sprayed or brushed with a layer of 1:1 cement sand core slurry, and the connection between the concrete and the brick wall is nailed with diamond mesh nails. Remove impurities such as fly ash to make the net smooth and dense.