-
1.Set sharing: Select the directory you want to share, right-click - Share & Security - check 'Shared Folder', add everyone in Security and enable guest users.
2.Use tools: Flying pigeon biography is easier to use.
3.Use a portable hard disk or USB flash drive to copy it.
Personally, I think the sharing is not bad, the transfer speed is fast, simple and convenient, and it can also enhance learning.
Flying pigeons are also good.
-
First, set the IP of the two computer connections to turn off the firewall and ping each other's IP if it is passed, it is being transmitted by LAN software such as Pigeon.
-
1.Copy with a USB flash drive.
2.File transfer.
If you really want to share, you can find it in the properties of the file.
-
Let's talk about your connection method first, the detailed home I'll help you remotely debug because it's very troublesome, it's not clear here.
-
1. First turn on the computer, left-click the network connection icon in the lower right corner of the computer, and click to open the network and sharing center.
2. Select the Change advanced sharing settings option in the Network and Sharing Center.
3. Select public or home network according to the network environment of the individual, and enable network discovery and file and printer sharing.
4. Right-click the computer icon on the desktop and select Manage.
5. Click on the local user and group, then click the user, double-click the guest user, that is, the guest user, double-click it, confirm that the account is disabled in the pop-up box and is not checked and click OK.
7. Click on the local policy, click on the user permission assignment, find the deny access to this computer from the network, and double-click it.
8. Make sure that there is no guest user in the red box, if there is, select it and click Delete, and click OK after deleting.
9. Then click on the security option in the local policy, find the sharing and security model for network access to the local account, and double-click on it.
10. Select Only guests in the drop-down list and click OK, then select guest in the drop-down list and click Share, and the file will be shared successfully in the LAN.
-
Right-click on the file, select Share, Advanced Share, and set file permissions, OK. Remember to turn off the firewall, turn off account control, turn on guest users, and set a password for people to log in. People need to know the IP of your computer, and then enter the IP address of your computer in Run, enter the account name, password, and log in.
-
Right-click on the file you want to share, and select Share in Share...
Enable DHCP in the router settings. Dynamic Host Setup Protocol (DHCP) is a local area network protocol that works using the UDP protocol and has two main purposes: to automatically assign IP addresses to users on the internal network or network service provider, and to provide internal network administrators as a means of managing all computers. >>>More
I used to have many similar experiences when renting a house in Beijing, most of them used P2P attack software to cause ARP spoofing, such as: network judges, P2P terminators; The solution is to run cmd first, first use ipconfig to check your IP and physical address, and then use the arp command to bind this method is indeed available, but I generally want to be convenient ** gadget, quite effective, no matter how they deceive it is useless, but the premise is to run the software before the other party has no conflict, the software name is anti arp sniffer; Or you can install a firewall Skynet to see whose IP goes directly to him; The technology is updated relatively quickly, and there may be newer defense methods now, please check the landlord on the Internet, good luck!
How to set up a simple FTP server in a LAN.
Step 1: Start -- Control Panel -- Administrative Tools -- Internet Information Services double-click Run -- then double-click Local Computer -- FTP Site -- Right-click Default FTP Site -- Properties -- Home Directory -- Local Directory -- Browse the selected files to share. >>>More
Change your own IP protocol The IP address of the router is generally I don't know if you're there. If yes, the IOP protocol writes this in the first line. 111 write by yourself, do not repeat between the computer and the computer The number is from 001 254) the second line will be filled in automatically, and the third line will be filled in with the mouse click on the line, which is the IP address of the router).
Open AntiARP
Sniffer, check whether the gateway address is automatically obtained in the [Manage] column on the right, if not, manually enter the gateway address, and then click [Fetch MAC]. After the MAC address is obtained, click [Auto Protection]! As shown in Fig >>>More