The satellite dish is commonly known as the cauldron lid, and there is a problem

1.Use the remote control to open the section with signal strength and signal quality (usually in the system settings).

2.Input CCTV uplink and downlink frequency: 3840 h 27500

3.Aim the lid due south and slowly deflect it to the east, be sure to be slow, as the system doesn't react that fast, and stop when the signal quality is at its maximum.

4.Adjusting the elevation angle is to slowly move the high-frequency head upwards, that is, you put your hand on the top of the lid behind the lid and press the lid down slowly, and wait until the signal quality is the highest to stop.

Use the TV guide channel to find the star (parameter symbol rate 4060 vertical downlink frequency 27500), there is no TV guide channel can choose to add the channel, set the parameters (symbol rate 4060 vertical downlink frequency 27500), the high-frequency head is aimed at the center of the pot, and the high-frequency head is zero scale level. Press the information button, the signal strength and signal quality information bar appears, first adjust the elevation angle, adjust the signal strength to the highest, and then adjust the azimuth angle, (generally due south slightly east or west, which is related to your local longitude), the signal quality appears, and adjust to the highest, and then change to Hunan and Sichuan and other stations with weak signals, and adjust the signal to the highest, (at this time, you can fine-tune the polarization angle, azimuth angle and elevation angle until the station is fully closed).

Summary. Dear, hello <>, I'm glad for your question Pot lid satellite channel has not received anything.

The reason why the satellite pot can't be received:

1. The satellite cauldron signal is blocked, resulting in the inability to receive the station.

2. The satellite pot database needs to be upgraded.

3. The quality of the received signal of the satellite pot is poor.

4. The elevation angle and azimuth angle parameters of the satellite cauldron antenna are incorrect.

5. The satellite coverage is small, and the satellite pot cannot receive the signal of many TV stations.

6. The satellite is damaged, and the satellite pot cannot be received.

Pot lid satellite channel did not receive anything.

Please wait patiently for a few minutes, it is being sorted out, and we will answer you immediately.

Dear, hello <>, I'm glad for your question The reason why the satellite pot can't receive the station is that the satellite pot can't receive it: 1. The satellite pot signal is blocked, resulting in the can't receive the station. 2. The satellite pot database needs to be upgraded.

3. The quality of the received signal of the satellite pot is poor. 4. The elevation angle and azimuth angle parameters of the satellite cauldron antenna are incorrect. 5. The satellite coverage is small, and the satellite pot cannot receive the signal of many TV stations.

6. The satellite is damaged, and the satellite pot cannot be received.

Hello dear, <>

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation. Finally, I wish you good health and a good mood!

To adjust the signal strength and signal quality in the system settings, follow the steps below:

1、Press the F1 button on the set-top box (the first button in the last row of the remote control of the set-top box),At this time, the TV display system settings interface,Signal strength and signal quality are displayed as0。

2. Press the OK button on the set-top box, if the line is smooth, you will see the signal strength flashing non-stop, and the signal quality is 0 to turn leftTurn right.

3. The pot is placed outdoors to coordinate in the southwest direction, and the signal quality will jump out immediately if the star is accurate, otherwise the signal quality will always be 0. After the signal quality is debugged, when it reaches the maximum, the satellite pot is fixed, and the signal quality is generally about 60%. Turn left|Turn right.

Generally speaking, the cauldron satellite program refers to the Zhongxing-6B satellite, that is to say, the cauldron satellite program is transmitted by the communication satellite Zhongxing-6b, and then goes to thousands of households.

The Zhongxing-6B communication satellite was developed and produced by the French company Thales Alenia. The satellite adopts the Alcatel 4000C2 satellite platform, with a design life of 15 years, and is equipped with 45 satellites, covering China, Southeast Asia, the Pacific and Oceania, and can transmit 300 sets of television programs.

I want to see the Zhongxing 6b satellite or the 125-degree Xinnuo 3 satellite that can be received by CCTV and provincial satellite TV. I want to watch Hong Kong, Macau, Taiwan and foreign programs. Acceptability of the Asian 3S satellite.

There are many satellites, but none of them are free, and there are many free ones in China, mainly Zhongxing 6a 6b.

First determine the satellites to be received, 138 Yihua and Digital Southeast, 122 Low End, South Slightly Biased, Zhongjiu, Southwest, Chinese, West Southwest. Most cities in China are south-west, and then the machines and televisions are connected, and a station is set up in the machine, if the normal connection machine has satellite strength, the quality is not, and if there is, it is between four and five percent.

The scope of your question is too large, watching different satellites, the direction of the pot lid is different; Different regions watch the same satellite, and the direction of the pot lid is also different. Look at the figure below in Changzhou, Jiangsu, and watch the direction of the lid and the elevation angle and polarization angle of the lid of Zhongxing 9 and Zhongxing 6B. If you need it, please take this answer as the best, and bring up your area and the satellite newspaper you want to watch, you can help to view.

Huhutong satellite pot installation direction: It is so simple to locate the satellite pot with a mobile phone compass.

The cauldron satellite dish does not have a station on the satellite, so there is no signal quality.

Having a signal strength only indicates that the device is good. Viewing can only be achieved after the "Signal Quality" % value appears and reaches a certain value. Adjusting the star is not only monotonous left and right directions, but also adjusting the up and down elevation angles at the same time.

Adjust the satellite antenna step by step, which is the azimuth, elevation and polarization angle of the satellite to be received.

The settings in the machine are also very important. As long as you make a mistake, you won't be able to pull it out. It can even break the machine. It's really not possible to find a professional to debug.

Connect all the signal cables, turn on the TV and receiver, then you will see the working screen of the satellite receiver, the machine will automatically scan the program, if not, it will prompt that the received program is zero. At this time, press the information button, you will see two stop indications, one is the signal strength (about more than 40%), the next one is the signal quality (after aligning the satellite, the indicator bar will become longer, some will turn green, indicating that the program is locked, the number is more than 30%), at this time, the antenna is aimed at the position of the southwest and slowly move up and down, while moving to see the change in signal quality strength, if it becomes longer or flashes all at once, then this position is the satellite position, and the position is repeatedly adjusted until the signal quality is maximized.

Is the check device normal? Under the premise that the parameters are set correctly, check whether there is signal strength in the state of star tuning? If there is no strength, the connection is not normal or the device is broken, there is no strength but the signal quality is not accurate to the star, readjust the antenna and adjust the signal quality to the maximum.

Satellite signal encryption, find a dealer to decode.

To make sure you: 1. Whether to restore the machine to factory settings; 2. Moved or touched the pot or had recently blown strong winds. If nothing is available, check to see if there is a problem with the feeder line or if the interface is in poor contact.

Hello, yesterday was fine.,Today, all the TVs are gone.,The set-top box digital light keeps flashing.,There's no signal on the TV.,What kind of return is this.。

First of all, determine the satellite to be received, recommend Zhongxing 6b Zhongxing 6a (Xinnuo) Yazhou 3S 9 need a special machine to find the strongest local receiving parameters and local latitude and longitude of the satellite, you can go to the Asian Satellite TV forum to view, add the program input in the machine to check the strongest receiving parameters, use the star tuning guide of the machine to determine the azimuth elevation angle, due south is zero degrees, the azimuth angle increases to the west (there is an explanation above), the machine switches to the increase program interface, input parameters, adjust the antenna orientation,** The signal quality strength changes first coarsely adjusted in fine-tuning until the program appears, and all programs are searched out by using the blind scanning function (no blind scanning is found on the Internet to find super password recovery and can).

Look at what is the strength and quality? There are plenty of satellites to choose from. Such as 125 134 138 degrees.

It is recommended that you fancy Star 6b has fifty-three sets of free programs.

First, check whether the feeder is broken and the pot is facing due south.

1. Check the Internet data and adjust the bias angle of the high-frequency head.

2. Put the TV on the channel CCTV1, and then rotate the direction angle of the cauldron satellite antenna to make the signal strength of CCTV1 reach the highest.

3. Then fine-tune the direction angle of the cauldron and the high-frequency head according to the signal quality of other channels, so that each channel can be clear.

Cauldron Satellite Dish Definition:

It has provided great convenience for some rural areas to understand the information of the outside world, but the prevalence of "cauldrons" has also caused some hidden worries. Because the parabolic antenna is often used for satellite TV reception, and the reflective surface of the parabolic antenna is similar to the shape of the iron pot we use in daily life, people call the parabolic antenna the satellite "pot" or "pot lid" antenna, referred to as the "pot". There are two kinds of parabolic antennas: forward feed antenna and partial feed antenna, and the reflective surface area of the forward feed antenna is relatively large, so it is commonly known as "cauldron"; The reflective surface area of the relative partial feed antenna is relatively small, which is called a "small pot" or "small ear".

In general, the "cauldron lids" installed by residents are almost never approved.

1. First of all, according to the satellite to be received, adjust the channel frequency received by the satellite receiver. Some satellite receiver frequencies are displayed as the downlink frequency of satellite channels, and some display the output intermediate frequency of the high-frequency head 950MHz 1540MH, which is the receiving input intermediate frequency of the satellite receiver. In this case, subtracting the MF frequency from the mid-frequency frequency of the high-frequency head 5150MHz gives the satellite down-satellite frequency of the satellite channel.

2. Receive all the connecting lines, adjust the feed coarsely according to the polarization mode of the signal to be received, and adjust the direction of the waveguide port of the feed according to the polarization requirements.

3. Turn the reflective surface of the antenna to the south, and loosen the elevation adjustment lever to make the upper and lower adjustment of the reflective surface flexible and convenient. Then, according to the longitude of the satellite to be captured and the geographical location of the modulation location, the antenna reflector is rotated little by little to the east or west to change the orientation of the reflective surface. After each rotation point, slowly adjust up and down and repeat until the signal appears, confirm that it is the satellite program to be received, and then keep the signal strength temporarily fixed at the elevation angle, and carry out the next step of azimuth fine-tuning.

4. Rotate the reflective surface of the antenna horizontally in a single direction to observe the TV image. Make the captured satellite signal from there to nothing, from strong signal to weak signal to signal just disappear, draw a straight line and mark the ground perpendicular to the ground at the junction of the tripod stand-up tray, and then reverse the antenna, so that the satellite signal image in the TV from weak to strong, and then from strong to weak, turn to the signal image just disappear, and draw all the way on the column at the azimuth tray mark, and there are two straight lines on the column at this time. Repeat the above steps several times, confirm that the position of the second marking point of the column is correct, and transfer the azimuth tray mark to the position of the center line between the two marking points of the column, which is the azimuth position of the satellite to be debugged.

The screws that fasten the azimuth are firm, and the azimuth is debugged.

5. Fine-tune the elevation angle: use the method of fine-tuning the azimuth angle, take two points on the elevation adjustment rod as a mark, and use the same method to fine-tune the elevation angle.

6. Fine-tuning of feed focal length and polarization direction: Fine-tune the focal length and polarization direction by adjusting the azimuth angle and elevation angle. When the length of the feed is limited, and the focal length fine-tuning is not suitable for the above methods, the noise polka point of the TV image picture has been reduced or there is no noise point, and the paper can be stuffed in the feed to make the picture appear more noise points, and then the feed is adjusted to observe the TV picture to reduce the noise point to the minimum, that is, the focal length is adjusted.

7. At this point, the system is received and debugged, the on-site debugging equipment is removed, the coaxial cable of the high-frequency head and the indoor receiver is connected, and the power divider is installed on the side of the multi-household receiving or CATV system, and the line amplifier is installed if necessary.