Is there any skill in cutting men s hair clippers for haircuts?

1. To work with two hands, you need to cooperate with both hands at the same time, try to keep the electric push without pressing the hair cutting comb, and move on a plane.

2. The hairdressing comb needs to have a contact surface with the hair, and the hair on the comb can be pushed over after carefully looking at the neatness and correctness.

3. For the hair above the occipital bone, it needs to be guided by the original push, how much needs to be removed and how much is left, and the heart needs to be accurate, and then push it off without hesitation.

4. The edge of the outer line should be cleaned after the men's edge is pushed, giving people a refreshing feeling.

The landlord is just starting out, right? In fact, this is a process problem! Do you think that place is not appropriate?

The fader must be skilled enough Pushing the edge is a problem The technique must be passed It depends on whether you usually take more clippers To be honest, the hairstylist was timid at first After all, it is a pit if you are not careful, right! Practice more, you will find the feeling in half a month, find your favorite way to cut your hair, and don't deliberately imitate other people's ......Look....

Don't shake your hands, practice more

We have the secret recipe. It works. No. Target.

1. Comb and cut your hair first.

2. The corners should be reasoned with faders, and the transition should be smooth along the direction of reasoning.

3. Comb and cut the short hair that is then followed by a comb.

4. Place the clipper on the comb to smooth the reasoning, comb less hair each time, and comb it along one after another.

5. In the same way, gradually move the direction of the comb, and cut it naturally and sequentially to the back of the head.

6. After thinning one side, you should look at the effect of the front, and then comb it backwards.

7. After the short hair on the upper part of the head is cut, continue to move the direction of combing and cut it to the other side of the head.

8. Stop every time you turn the direction and check the excessive hairstyle.

9. Trim the hair at the back of the head, move the comb and cut from top to bottom, from high to low, and also cut in order.

10. The higher part still needs to be combed with a comb and pushed and cut with a fader.

11. The bottom part should be pushed and cut with a small clipper.

12. The lowest part should be slowly trimmed from the bottom up, and the fader should be moved upward from low to high, so as to connect smoothly with the upper part of the hair.

13. Finally, the top head shape should be trimmed, and then the fingers should be sandwiched with a comb and then the hair, and the scissors should be used to trim the trapped keys, this kind of hair cutting is relatively difficult, and the hair should be combed and trimmed according to the required hairstyle.

14. After cutting.

1. To work with two hands, you need to cooperate with both hands at the same time, try to keep the electric push office without pressing the hair cutting comb, and move on a plane.

2. The hairdressing comb needs to have a contact surface with the tung oak hair, and the hair on the comb can be pushed over after carefully looking at the neatness and correctness.

3. For the hair above the occipital bone, it needs to be guided by the original push, how much needs to be removed and how much is left, and the heart needs to be accurate, and then push it off without hesitation.

Clippers used to shave hair are called electric clippers. It belongs to a haircutting tool, which is composed of an electric clipper with a suction pipe hole in the upper part, a vacuum cleaner and a vacuum pipe with a power feeder and a slip switch, and the slip switch on the side wall behind the hair clipper is opened, and the vacuum cleaner and the hair clipper are electrocuted at the same time. Barber, hairdressing tools, dust imitation spring by fixed push teeth, movable push teeth, adjusting handles, shells and electrical parts installed in the shell, the use of Penai must be powered by electricity, AC big disadvantage electricity is the majority.

Clippers used to shave hair are called electric clippers. It belongs to a haircutting tool, which is composed of an electric clipper with a suction pipe hole in the upper part, a vacuum cleaner and a vacuum pipe with a power feeder and a slip switch, and the slip switch on the side wall behind the hair clipper is opened, and the vacuum cleaner and the hair clipper are electrocuted at the same time. Haircutting and hairdressing tools are composed of fixed push teeth, movable push teeth, adjusting handles, shells and electrical parts installed in the shell, which must be powered by electricity when used, with alternating current being the majority.

1. The side and back of the head are clamped with a 3mm length with clipper and pushed directly over, pay attention to the side, the back of the head and the top of the head to leave a part of the hair do not touch, this part of the hair is finally trimmed to ensure that the two parts of the hair have a transition. Pay attention to the scalp and push several times to prevent the residue of long hair. When cutting the hair on the back of your head, you can only feel the length of the hair with your fingers and repair it.

2. Try to trim the hair on the top of the head with tooth scissors, and only need to use tooth scissors to cut the hair 1cm above the root of the hair where the hair is dense, and cut a few more times at the required length of the place where it needs to be cut short.

3. The transition area can be slowly treated with dental scissors, so that the transition between the two parts is very smooth. It is more time-consuming, or use an electric clipper to clip a certain length (to save the hand), and gently "rub" it on the hair in the transition section. Rub the transition area a few more times and it will be smooth.

The transition area between the back of the head and the top of the head is difficult to deal with, so it is recommended to repair it slowly with dental scissors.

4. Finally, trim the hair around the ears and the hair on the sideburns. The hair on the sideburns is very important, and this part of the hair, as well as the stray hair on the neck, can be trimmed with an electric shaver.

If it grows long, it will warp, scissors cut short, thin, no length, no fall, it will still warp, then the length of 2 to 3 months, he will still warp, either the two sides as a whole will be long, there is a length, it will fall, it will not warp, or directly push a little shorter, the tube is longer, for reference, if there is a discrepancy, it is expected to include.

How do I have a pit when I use it.

1. The sense of hierarchy is different.

Cutting your hair short with scissors will make the whole hairstyle have a sense of layering and design, and it will look more beautiful; And pushing off the whole shape with the fader right will be smoother, but it is relatively not so good-looking.

2. The length is different.

Cutting hair short with scissors will still have a certain length left, which is not so refreshing; The hair will be very short and last relatively long after being pushed with a clipper.

If it grows, it will warp.

The scissors are cut short and thin, and there is no length and no falling, it will still warp.

Then the length of 2 to 3 months will still be warped.

Either the two sides are left long as a whole, and if there is a length, it will not fall, and it will not warp, or it will be directly pushed shorter, and the tube will be longer.

For reference, if there is a discrepancy, please forgive.

The faders are relatively flat, but the relative shape is not so good-looking.

One is to cut your hair short and the other is to shave your head.