The leaves of the bowl lotus can be cut off if they are wilted

Don't cut this, if you cut it, it is easy to cause the whole plant to rot, natural wilting and drying, this is the best. A few of mine wilted because of pruning.

If the wilting is severe, it can be cut off.

Causes of the wilting of bowl lotus leaves:

1. Improper fertilization.

1. Too much fertilizer.

If the amount of fertilizer is too large, there is a risk of damaging the roots, the roots will die, the ability to absorb nutrients will be weakened, the whole green plant will look wilted, the growth will slow down, and the leaves will wither.

Solution: If this is the case, it is advisable to dig it out, start planting again, change to a new pot of clean soil, do not add fertilizer, and spray the leaves with a little more water. After digging it out, you can check the condition of the root, if it is black, very short or rootless, it means that the judgment is correct.

2. Lack of fertilizer. If there is too little fat, the color of the leaf will fade, which usually occurs in the late stage of its growth or growth stage. If there is a lack of nitrogen, the old leaves will seem to have withered, the new leaves will become smaller, and the stalks will be thin.

Disposal method: Add some nitrogen-rich sea meal wogao nitrogen water-soluble fertilizer, not too much at a time, you can increase the number of times.

Second, the soil is alkaline.

If it is alkaline, it will affect the absorption of some rare elements by the roots, and the leaves will wither if they have no excess nutrients to absorb.

Disposal method: You can add some ferrous sulfate, which can change the pH value of the soil and supplement iron.

3. The environment is uncomfortable.

1. Insufficient light.

If it is not allowed to receive the sunlight it needs, it will affect the production of chlorophyll, so the leaves will wither.

2. Diseases. If the disease is affected, the leaves will develop yellow spots, which will then turn brown and die.

It needs to be cut off, and it should be maintained normally after cutting.

1. Lack of fertilizer: Bowl lotus likes fertilizer during the growth period, especially potassium fertilizer. If there is a long-term lack of fertilizer, the leaves of the bowl lotus will turn yellow, the leaves will rust spots, and the leaves will gradually wither and die from the periphery to the center.

2. Insufficient light: bowl lotus likes strong light, about eight hours a day, if the light is insufficient, it will lead to the inability to carry out normal photosynthesis, which will affect the growth of leaves, and the leaves will be yellowing and long, so the leaves should be often exposed to the sun.

3. The temperature is too low: the temperature of the bowl lotus period is generally kept at about 30 degrees, if the temperature is lower than 15 degrees, it is easy to cause the leaves to wither and turn yellow.

4. Water quality: There is chlorine in tap water, and it is easy to cause dead leaves if used directly, so tap water should be exposed to the sun for one or two days before use.

5. Stem and leaf decay: In the process of breeding, some stems and leaves will die and rot, which will affect the normal growth of bowl lotus. Rotten stems and leaves can be removed, rinsed, and replaced with water.

6. Soil fertilizer and seedlings: Bowl lotus likes light fertilizer, so don't add too much fertilizer at ordinary times, it is easy to burn roots and rot. Generally, when 4 to 5 pieces are grown, the first application of Bika water-soluble fertilizer can be carried out, do not pour it directly in the pot, and wrap the fertilizer with mud.

7. Soil: Generally, yellow mud and sandy vegetable garden soil can be mixed. When the bowl lotus grows one or two leaves and has a white root system, it can be transplanted into the soil.

If you can cut it off, cut off the dead leaves, small leaves, and yellow leaves at the bottom, and put it in a sunny place, don't have too much water, and spray the leaves with fungicide, which I planted.

Hello, yes. Reasons for the wilting of bowl lotus leaves:

1. Phosphorus and potassium fertilizer deficiency: potassium fertilizer is needed for leaf growth, and the leaf color of bowl lotus is brown and potassium is lacking, and it is yellow and phosphorus deficient. Long-term potassium deficiency is manifested in yellowing of leaves, rust spots on the leaf surface, and gradual death of the leaf periphery towards the center.

2. Lack of sunlight: lack of light leaves are yellow and long, bowl lotus likes strong light, and it is advisable to bask for 7 or 8 hours a day.

3. Low temperature: the temperature is lower than 14 degrees and the leaves are easy to wither, and the best growth is 22 to 35 degrees.

4. Chlorine in tap water: the tap water should be dried for 1 2 days, because there is chlorine in the tap water, it is easy to cause dead leaves if used directly.

5. The soil is too fertile to burn seedlings: the bowl lotus likes light fertilizer, and the dug pond mud begins to soak in water for 1 week. When the first leaf is released, the second leaf is about to be released and a white root system grows 1 2 When it grows, it can be planted into the soil.

6. Caused by pathogens in the soil: flowers are mainly harmed by spoilage and leaf blight, but they are not too serious. If the hazard is found, it can be sprayed with 1000 times of 50 Tobuzin wettable powder. The soil should be dried and sterilized in the sun beforehand.

7. What to do if the diseased leaves are removed: if the diseased leaves are seriously removed, a part of the stem should flow out on the water surface when picking, so as not to let the water flow back into the stem (the lotus leaf stem is hollow) into the lotus root and cause rotten roots.

How to fertilize: 1. Potassium fertilizer can not be poured directly into the pot, but wrapped in mud to make a ball, and then stuffed into the mud in the middle of the pot after it is slightly dried.

2. The first fertilization is generally carried out in the pot lotus growing 4 to 5 floating leaves, which is equivalent to "colostrum fertilizer", the quality and quantity should be reasonable, with imported diammonium phosphate as the top, followed by the most reliable nitrogen, phosphorus and potassium ternary compound fertilizer. Apply 10 to 16 grains per pot per application.

What kind of soil to use: 1, generally yellow mud, sandy soil according to the ratio of 7:3 mix is appropriate 2, can be directly selected vegetable land garden soil.

2. When to put the soil, when the first leaf is released, the second leaf is about to be released, and when the white root system grows 1 2 cm, it can be planted in the soil.

The leaves of the bowl lotus have withered, and it can be cut off directly.

However, it should be noted that it is best to cut directly from the bottom of the roots.

The withered and rotten leaves should be removed in time, and some mosquito coils or insecticides can be put in an appropriate amount if there are sandworms.

If it is too dense, it can be pinched off to facilitate the ventilation of the bowl lotus. At the same time, some rotten and weak leaves should also be removed.

Bowl lily planting. 1. Seed treatment.

The purchased bowl lotus seeds need to be treated in order to germinate quickly. You only need to use a tool to break a small hole in the round concave side of the bowl lotus seeds. Be careful when doing it to avoid injuring the embryos.

2. Soak in water to sprout.

Soak the treated seeds in warm water and change the water every 2-3 days until the seeds germinate. If the seeds cannot be planted immediately after germination, continue to soak them in room temperature water until they have floating leaves and roots.

3. Transplantation. Prepare an opaque and deep porous porcelain pot, then dig some silt into the pond and put it in the pot with some water, or use fertile clay. Gently remove the lotus from the water and slowly press the roots into the mud.

4. Add water. The transplanted bowl lotus should be added with water to give it enough space to grow, and the amount of water added should not submerge the floating leaves. After adding water, you may sprinkle a layer of beautiful pebbles when the water body becomes less turbid, and then sprinkle another layer after the water body is cleaned.

In this way, the next time you manage the bowl lotus, the water body will not be so easy to become turbid.

5. Light. Bowl lotus is a flower that likes light, especially in the summer growth season, at least 7-8 hours of light should be ensured every day. After the bowl lotus blooms, you can move the bowl lotus indoors to enjoy it, and remove it every 1-2 days to maintain it in the sun.

In addition, it is best to rotate the pot every other week or so to make the whole plant of bowl lotus more evenly lighted, which is conducive to the plant type of bowl lotus.

Summer is the best time for bowl lily to grow. Bowl lotus is prone to problems such as yellow leaves, rotten leaves, and no flowering, which is mostly due to improper maintenance. After planting, the bowl lotus gradually enters the flowering period.

Summer is the key to the maintenance of bowl lotus. At this time it grows a lot of leaves and flowers. Why is it that sometimes bowl lilies not only do not bloom, but are also prone to yellow and rotten leaves?

The main reason is because of improper protection in the summer. Today we will talk about the tips for maintaining bowl lotus in summer.

If the leaves of the bowl lily rot from the edges, the rotten parts will gradually turn yellow, which is due to the use of too much fertilizer. When planting bowl lotus, you don't need to apply too much fertilizer. None of the fertilizers are required until the leaves are erect.

When the floating leaves grow, a small amount of phosphorus and potassium fertilizer can be applied to promote the growth of vertical leaves. Fertilize again until the flowers have gone. When planting bowl lotus, you should not add too much fertilizer at one time.

Too much base fertilizer, and frequent fertilization during the growth period, is prone to fertilizer injury, so that the leaves rot from the edge.

When the edge of the bowl lotus appears to rot, the water should be changed in time. It is advisable to discard all the water and replace it with new water. At the same time, heavily rotten leaves should be removed and disinfected by sprinkling a small amount of mycetes in water.

If the veins of the leaves of the bowl lotus look green, but the mesophyll is completely yellow, and there are rotten patches on the leaves, it should be the cause of the alkaline nature of the potting soil. This condition is very common in the north, because most of the soil and water in the north are alkaline, and the bowl lily prefers a slightly acidic environment, which can cause the bowl lily to grow poorly, the leaves rot, and not bloom. This question is easy to ignore by flower lovers.

For this reason, the yellow also only needs to be acidified with ferrous sulfate. As long as the leaves are intact and not rotten, they will basically return to normal. Rotten leaves should be removed promptly.

On the one hand, there is no way for a rotten leaf to return to its original state, affecting the overall appearance.

On the other hand, the breeding of bacteria leads to the spread of diseases. If you are in the north to maintain bowl lotus, it is recommended to add ferrous sulfate when planting. Bowl lilies do not need to be changed frequently.

When the water quality and soil alkalinity are not very large, generally we add ferrous sulfate once, and the leaf veins will not be clear and the mesophyll will be yellow. In the case of high water quality and soil alkalinity, we can add ferrous sulfate several times during the growth period.

In summer, there is no need to worry about problems such as rotten leaf edges, yellow mesophyll, and green leaf veins.

It is very likely that the plant is deficient in nutrients, so nitrogen and potassium fertilizers should be supplemented in time to promote the growth of plant rhizomes, watered appropriately, keep the soil moist, and be placed in a ventilated place.

You can add some nutrient solution. This condition is most likely due to a lack of nutrients. You should also consult with a professional.

First of all, bowl lily is a light-loving plant that needs hours of light every day, so it cannot be kept indoors for a long time. The black and dry edges of the leaves may be due to too much fertilizer, change the water several times a day, and the desalination fertilizer should be fine.

My bowl of lotus soaked for 3 weeks and didn't sprout (opened)! What's the matter!

Have you copied the back of the leaf to see if there are insects?

It should be done by adding that bottle of fertilizer, so don't add it for the time being.

When the new leaves of the bowl lotus grow, some of the old leaves will rot inside, and the bowl lotus pot you choose is also standard, and it should not be a problem with the container.

The bird came to drink and got the water dirty, but every day it was okay to skim off the surface oil and add new water.

I have never heard of the bowl lotus having raw insects, or some insects have produced larvae in the water, such as mosquito larvae, which can raise some mosquito-eating fish, and feces can also be used as nourishment.

Russian. Why do you keep asking me about the bowl lotus? Belle.

Summary. Bowl lily is a common aquatic plant, and the leaves are an important part of its growth. If the leaves of the bowl lotus are cut off, it will not be able to photosynthesize and will not be able to survive.

However, if you just cut off some old, yellowed or diseased leaves, you can still grow new leaves. In addition, if the cut leaves do not affect the growth point of the bowl lily, which is the center of the plant, then it is still possible for it to grow new leaves. Therefore, if you are going to prune the leaves of the bowl lily, it is better to cut off only some of the old parts rather than the entire leaf.

The bowl lotus cut the leaves, and the leaves can still grow.

Bowl lotus is a common aquatic plant, and the leaves are an important part of its growth. If the leaves of the bowl lotus are cut off, it will not be able to photosynthesize and will not be able to survive. However, if you just cut off some old, yellowed or diseased leaves, you can still grow new leaves.

In addition, if the cut leaves do not affect the growth point of the bowl lily, which is the center of the plant, then it is still possible for it to grow new leaves. Therefore, if you want to prune the leaves of the bowl and the lotus in the bowl, it is better to cut off only some of the old parts, rather than cutting off the whole leaf.

Fellow, I really didn't understand, I can be more specific.

Bowl lotus is a common aquatic plant, and the leaves are an important part of its growth. If the leaves of the bowl lotus are cut off, it will not be able to photosynthesize and will not be able to survive. However, if you just cut off some old, yellowed or diseased leaves, you can still grow new leaves.

In addition, if the cut leaves do not affect the growth point of the bowl lily, which is the center of the plant, then it is still possible for it to grow new leaves. Therefore, if you want to prune the leaves of the bowl and the lotus in the bowl, it is better to cut off only some of the old parts, rather than cutting off the whole leaf.

Summary. Dear you, bowl lotus is an aquatic plant, and its leaves are important organs for photosynthesis. If the leaves are cut off, the photosynthesis will be affected, but the roots and stems of the lily will continue to grow.

Under the right conditions, the leaves of the bowl lily can also grow back. The growth of bowl lily requires sufficient sunlight and nutrients, if the leaves are cut off, it is recommended that you replenish the nutrients in time and keep the water clean. At the same time, the light time of bowl lotus can be appropriately increased to promote its growth.

It should be noted that if too many leaves are cut, it may affect the growth and reproduction of bowl lilies. Therefore, when pruning, it is necessary to carry out an appropriate amount of pruning according to the specific situation to ensure the healthy growth of bowl lotus.

The bowl lotus cut the leaves, and the leaves can still grow.

Respect for you, bowl lotus is an aquatic plant, and its leaves are important organs for photosynthesis. If the leaves are cut off, the photosynthesis will be affected, but the roots and stems of the lily will continue to grow. Under the right conditions, the leaves of the bowl lily can also grow back.

The growth of bowl lily requires sufficient sunlight and nutrients, if the leaves are cut off, it is recommended that you replenish the nutrients in time and keep the water clean. At the same time, it can appropriately increase the bare limb posture and irradiation time of bowl lotus to promote its growth. It should be noted that if too many leaves are cut, it may affect the growth and reproduction of bowl lilies.

Therefore, when pruning, it is necessary to carry out an appropriate amount of pruning according to the specific situation to ensure the healthy growth of bowl lotus.

You've done a great job! Can you elaborate on that?

Respect for you, bowl lotus is an aquatic plant, and its leaves are important organs for photosynthesis. If the leaves are cut off, the photosynthesis will be affected, but the roots and stems of the lily will continue to grow. Under the right conditions, the leaves of the bowl lily can also grow back.

The growth of bowl lily requires sufficient sunlight and nutrients, if the leaves are cut off, it is recommended that you replenish the nutrients in time and keep the water clean. At the same time, it can appropriately increase the bare limb posture and irradiation time of bowl lotus to promote its growth. It should be noted that if too many leaves are cut, it may affect the growth and reproduction of bowl lilies.

Therefore, when pruning, it is necessary to carry out an appropriate amount of pruning according to the specific situation to ensure the healthy growth of bowl lotus.